SCREWDRIVERS & HEX KEYS

Screwdrivers Acetate Grip[edit | edit source]

Types Of Screwdrivers

A must-have tool for all, Fully hardened Spring Steel blade for high wear resistance Round shaft efficiently transmits torque to the screw. Powerful magnetic tip holds screws Suitable for professional & DIY purpose

Available in following versions

1. Standard Screwdrivers

2. General-purpose Use

3. Insulated Screwdrivers Non-conductive plastic cover over the shaft prevents user from any electric shocks

4. Insulated 2-in-1 Screwdrivers Insulated reversible shaft for quick switching between tip styles

5. 2-in-1 Screwdrivers Reversible shaft for quick switching between tip styles

6. *Strike-through Screwdrivers Shatter-proof acetate handle with metal striking cap for light hammering jobs

CAT NR.	BLADE LENGTH	BLADE DIA.	TIP DIMENSION	TIP NO.
CAT NR.	(MM)	(MM)	(MM)	TIP NO.
STANDARD - FLAT
SCDR/PA/FL6/100	100	6	6×0.6	-
SCDR/PA/FL6/150	150	6	6×0.8	-
SCDR/PA/FL6/200	200	6	6×0.8	-
SCDR/PA/FL8/200	200	8	8×1.2	-
SCDR/PA/FL8/250	250	8	8×1.2	-
SCDR/PA/FL8/300	300	8	8×1.2	-
SCDR/PA/FL10/400	400	10	10×1.5	-
SCDR/PA/FL10/450	450	10	13×1.9	-
STANDARD - PHILIPS
SCDR/PA/PH2/150	150	6	-	2
SCDR/PA/PH2/200	200	6	-	2
INSULATED
SCDR/PA/FL5/200/I	200	5	5×0.8	-
INSULATED 2 IN 1
SCDR/PA/FL6/PH2/100/I	100	6	6×0.7	2
SCDR/PA/FL6/PH2/140/I	140	6	6×0.7	2
SCDR/PA/FL6/PH2/250/I	250	6	6×0.7	2
2 IN 1
SCDR/PA/FL6/PH2/100	100	6	6 ×0.7	2
STRIKE THROUGH
SCDR/PA/FL8/210/SR	210	8	8×1.2	-

Screwdrivers Cushion Grip[edit | edit source]

Screw Driver Cushion Grip

Professional quality screwdrivers,

Chrome Vanadium Construction : For higher torque & wear resistance Shaft extends into the handle, ensuring full transfer of force.

Torque Maximiser Grip : Multi-component injection moulded hexagonal grip is non-slip & does not roll away

Magnetised Tip : Accurately hardened tip ensures long lasting durability Black oxide finish for enhanced corrosion resistance

CAT NR.	SIZE		SHAFT LENGTH
CAT NR.	(MM)	(INCH)	(MM)	(INCH)
SCDR/R/FL3/75	3	1/8	75	3
SCDR/R/FL3/100	3	1/8	100	4
SCDR/R/FL4/100	4	5/32	100	4
SCDR/R/FL5.5/100	5.5	7/32	100	4
SCDR/R/FL5.5/150	5.5	7/32	150	6
SCDR/R/FL6.5/38	6.5	1/4	38	1-1/2
SCDR/R/FL6.5/100	6.5	1/4	100	4
SCDR/R/FL6.5/150	6.5	1/4	150	6
SCDR/R/FL6.5/200	6.5	1/4	200	8
SCDR/R/FL8/150	8	5/16	150	6
SCDR/R/FL8/200	8	5/16	200	8

SCDR/R/PH0/75	PH0		75	3
SCDR/R/PH1/75	PH1		75	3
SCDR/R/PH1/100	PH1		100	4
SCDR/R/PH2/38	PH2		38	1-1/2
SCDR/R/PH2/100	PH2		100	4
SCDR/R/PH2/150	PH2		150	6
SCDR/R/PH2/200	PH2		200	8
SCDR/R/PH3/150	PH3		150	6

SCDR/R/PZ1/75	PZ1		75	3
SCDR/R/PZ2/100	PZ2		100	4
SCDR/R/PZ3/150	PZ3		150	6

SCDR/R/T10/100	T10		100	4
SCDR/R/T15/100	T15		100	4
SCDR/R/T20/100	T20		100	4
SCDR/R/T25/100	T25		100	4
SCDR/R/T30/100	T30		100	4
SET
SCDR/R/6/ST	Flat: 3x75 mm,5.5 x 100 mm, 6.5 x 150 mm; Phillips: PH0 x 75 mm, PH1 x 100 mm, PH2 x 150 mm;

7 pc Insulation Screwdrivers Set[edit | edit source]

Certified to IEC 60900

Individually forged from Chrome Vanadium Steel, blades are fully hardened & tempered for increased durability & strength. Magnetized tip to hold screws Bi-material ergonomic handle is impact and abrasion resistant 1000V SAFE. Each tool is tested for dielectric strength under a 10000 volt load to guarantee safe working upto 1000 Volts. Ideal choice for electricians for use on terminal blocks, control cabinets, switches, relays,sockets etc.

TYPE	SIZE		SHAFT LENGTH
	(MM)	(INCH)	(MM)	(INCH)
SLOTTED	6.5	1/4	150	6
	5.5	7/32	125	5
	4	5/32	100	4
	3	1/8	100	4

PHILIPS	PH1		80	3-1/8
PHILIPS	PH2		100	4

VOLTAGE TESTER	110V - 230V Single Pole Voltage Tester

Hexagon Key Sets[edit | edit source]

S2 STEEL:[edit | edit source]

Superior S2 steel construction. Hardened and tempered with corrosion resistant bright nickel plating. Chamfered hex end for convenience in usage Ball end permits easy access in tight, hard to reach spaces - upto 30° angle in recess from the screw head

Hardness: 50-52 HRC

ALN/HX-BL/7L/GRZ
7 Hex Keys With Ball End - Long - Metric
HEX	L1	L2
(MM)	(MM)	(MM)
2.5	20	86
3.0	22	91
4.0	27	103
5.0	32	118
6.0	37	139
8.0	43	155
10.0	49	177

ALN/HX-BL/7L/SAE/GRZ
7 Hex Keys with Ball End -Long - SAE
HEX	L1	L2
(INCH)	(INCH)	(INCH)
3/32	5/8	2-1/64
1/8	45/64	2-13/64
5/32	53/64	2-33/64
3/16	15/16	2-3/4
1/4	1-1/16	3-3/16
5/16	1-17/64	3-47/64
3/8	1-11/32	4-1/4

ALN/HX-BL/9EL/GRZ
9 Hex Keys with Ball End - Extra Long - Metric
HEX	L1	L2
(MM)	(MM)	(MM)
1.5	15	91
2.0	17	101
2.5	20	113
3.0	22	127
4.0	27	142
5.0	32	163
6.0	37	184
8.0	43	205
10.0	49	233

ALN/TX-TX/9L/GRZ
9 Torx Star Keys - Long
TORX	L1	L2
	(MM)	(MM)
T10	18	86
T15	20	90
T20	20.5	94
T25	20.5	100
T27	21	105
T30	24	114
T40	26.5	123.5
T45	29.5	132.5
T50	32.5	151

ALN/HX-HX/8/GRZ
8 Hexagonal Keys - Metric
HEX	L1	L2
(MM)	(MM)	(MM)
1.5	14	45
2	15	48
2.5	16	51
3	18	56
4	21	64
5	24	70
5.5	26	75
6	27	81

ALN/HX-HX/10/GRZ
10 Hexagonal Keys - Metric
HEX	L1	L2
(MM)	(MM)	(MM)
1.5mm	14	45
2mm	15	48
2.5mm	16	51
3mm	18	56
4mm	21	64
5mm	24	70
5.5mm	26	75
6mm	27	81
8mm	32	95
10mm	34	108

CHROME VANADIUM:[edit | edit source]

Hardened & tempered with corrosion resistant black oxide finish