OILING EQUIPMENT

Lever Action Barrel Pump

Oil pump designed & engineered for convenient use & long service life. Powder coated steel pump body with aluminum die cast pump head. Plated steel lever handle with rubber grip for convenience in usage. 3/4" pump inlet Complete with curved metal spout & telescopic suction tube for use on 50-210 litre drums.

WETTED COMPONENTS

Steel, Aluminium, NBR,  Brass, PVC

RECOMMENDED USE

Oil Based Fluids, Heating Oils, Motor Oil, Heavy & Light Oils, Kerosene & Diesel

DO NOT USE WITH

Water Based Fluids, Solvents, Acids, Petrol etc.

Ezee Flow Pumps

Versatile pump, engineered for trouble free use on. plastic containers with pullout / Rieke® spout or 2" external threads. Heavy duty steel suction tube, with the pump head made from Nylon. Pump head incorporates nozzle holder & option to drain back over flown fluid into the container. The pump comes with interchangeable bung adaptors. Standard bung adaptor is useful when using the pump on containers with external threadings. When using the pump on containers with plastic pullout Rieke® spout, the other adaptor may be used. Suitable for use on 50 litre plastic drums. Pump delivers on the upward stroke Complete with rigid steel discharge spout & 48" discharge hose

WETTED COMPONENTS : Steel, Aluminium, Polyethylene, Nylon, High Nitrile Rubber, PVC & Acetal

RECOMMENDED USE : Engine Oils, Gear Oils, Diesel and Light Fuel Oils

DO NOT USE WITH : Water based & other corrosive media.

Rotary Barrel Pump

Most popularly used pump for general purpose lubrication on farms, automotive, workshops & construction sites.

Pump features a dual directional operation that allows the pump to both empty as well as refill container.

Rugged cast iron construction with machined vanes for better draw & smoother delivery

1" pump inlet

Complete with 3 pc rigid suction tube for use on 50-210 litre drums

WETTED COMPONENTS : Steel, Cast Iron, NBR

RECOMMENDED USE : Heating Oils, Motor Oils, Lubricating Oils etc.

DO NOT USE WITH : Water based Media, Acids,Petrol etc.

Rotary Barrel Pump - V Series

Pump for general purpose lubrication on farms, automotive, workshop & construction sites.

Rugged cast iron construction with machined vanes for better draw & smoother delivery.

Pump Inlet 1" , Pump Outlet 3/4"

Complete with 3 pcs rigid suction tube for use on 50-210 litre drums

WETTED COMPONENTS : Steel, Cast Iron, NBR

RECOMMENDED USE : Heating oils, Motor oils, Lubricating oils, Diesel, Kerosene etc.

DO NO USE WITH : Water based media, Acids, Petrols etc.

Bucket Oil Pumps

Portable oil pumps designed for dispensing transmission differentials & heavier oils. Pump with variable handle setting for use with media of different viscosities. Includes 48"/4' PVC hose with nozzle. Includes steel drum (12 litre or 16 litre capacity) with a choice of with or without wheels.

Bucket Oil Pump with Meter

Pump designed for transferring transmission differentials & heavier oils. Zinc plated pump body with aluminum die cast head & adjusting flange. High pressure positive displacement meter with oval gear mechanism for optimum accuracy. Supplied complete with 30 litres steel bucket, mechanical oil meter, wheels and pull handle.

Air Operated Stainless Steel Pump 3:1

3:1 Air Operated pump, corrosion protected for use with water based fluids, such as detergents, windshield fluids, water etc.

Wetted components are made out of stainless steel.

Pump is designed to work in corrosive environments, ideal for use in car washers, garages, workshops, lube trucks, industry etc. Reciprocating piston operated 63 mm dia. Air motor. Pump has a built in stainless steel strainer at inlet to keep contaminants away.

2" die cast aluminum bung  for use with 210 litre drums.

Air Operated Oil Ratio Pumps

World-class industrial oil dispensing pumps with guaranteed performance & hassle free operation. Pumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm , construction sites or as part of the mobile oil system. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 63mm dia. air motor. Pumps have a built in strainer at inlet to keep contaminants away.

WETTED COMPONENTS

Steel, Brass, Aluminum, Hi-Nitrile Rubber, Polyurethane,Turcite* & Nylon**

(*Only On 3:1 & 5:1 Pumps, **Only On 1:1 Pump)

1:1 PUMPS

Transfer pump, used transfer for quick of oils from large drums to smaller containers. These have a double acting operation with discharge upto 40LPM

Ideal for use with low to medium viscosity (upto SAE 80 Oils) for transferring over short distances (5 metres)

Air Consumption: 270LPM

1:1 pump is also available complete with oil bar tap & connecting links (ODS series), used as an air operated oil dispenser to quickly & conveniently dispense oils from drums.

3:1 PUMPS

Amongst the most popular general purpose air operated pumps.

Pumps are single acting with discharge upto 14 LPM.

Ideal for use with medium to high viscosity oils (upto SAE 130) for transferring over short distances (upto 30 meters), mostly used with Trolley mounted kits.

Air Consumption: 230 LPM

5:1 PUMPS

High pressure air operated pumps for dispensing oil at 5 times the pressure as the air inlet.

Pumps are double acting with discharge upto 18LPM.

Ideal for use with high viscosity oils (upto SAE 240) for transferring over short & long distances (upto 50 meters), mostly used with Trolley mounted kits both with & without hose reels, as well as with fixed systems for centralized distribution.

Air Consumption: 250LPM

Trolley Mounted Oil Pump Kits

Trolley mounted kits are ideal for use in workshops, garages, shop floors providing complete portability for everyday oiling jobs. Designed for use with 55 gal. (205 Litre) Oil Drums, these come complete with ;

1. Air Operated Oil Pump with 2"  Bung (3:1 or 5:1)

2. 3.5m (11-1/2") x 1/2" ID Oil Hose / Oil Hose Reel with 10m (30') x 1/2" Oil Hose

3. Digital Control Gun

4. Drum Trolley

5. 1/4" Miniature Air Filter-Regulator & Lubricator

6. Hose for connecting pump outlet to reel  inlet* (*only for models with hose reel)

7. Hose Reel**

Kit comes in CKD form & can be assembled quickly. Trolley can be locked with brakes provided on the wheels

Available in two variations both in BSP & NPT threads

a. 3:1 pump System

b. 5:1 pump system complete with Hose Reel

*only with 5:1 system

OILMASTER® Air Operated 5:1 Oil Pump

Highly reliable air operated 5:1 pump for dispensing oils at 5 times the pressure as the air inlet. Ideal for indoor applications in automotive workshops for pumping oils (upto SAE 140). Dispenses oils over distances upto 50m Unique pump design with non corroding air motor, requires no lubricator in the air line. Built- in pressure relief valve prevents both the pump & system against damage created by excessive pressure due to thermal expansion. Reciprocating piston operated 72 mm dia. Air motor. Stub pump supplied complete with 2" bung Complete with suction tube to install pump on 210 litre drums.

WETTED COMPONENTS : Aluminium, Zinc, Brass, NBR, Polyurethane.

RECOMMENDED USE : Oil upto SAE 140, Automatic Transmission fluids, Engine Oils, Gear Oils, Hydraulic Oils

Portable Oiling System

Ideal choice for workplace requiring movable oil dispensing systems Includes

1. Oil Master Air Operated 5:1 Pump, T512-G

2. Retracta Oil Hose Reel (OMP2101)

3. Oil Control Gun with Mechanical Meter

4. 210 Litre Drum Trolley & Hydraulic Hose to connect pump outlet to hose reel inlet

RECOMMENDED USE : Suitable for dispensing oils upto SAE 140 i.e Engine Oil, Hydraulic Oil etc.

r-Series™ Industrial Air Operated Oil Ratio Pumps

World-class air operated industrial quality oil dispensing pumps with guaranteed performance & hassle free operation

All metal die cast aluminum construction with hardened wear resistant moving parts. Stub pump supplied complete with 2" bung, pump can be wall mounted, mounted on a tank, drum etc. Also available separate suction tube for installing pump on a 210 litre drums Air line lubricator included as standard accessory.

WETTED COMPONENTS : Aluminium, NBR, Carbon, PTFE, Zinc Plated Steel, Brass.

3:1 PUMP

Heavy duty industrial 3:1 ratio pump for dispensing  oils at 3 times the air inlet pressure. Reciprocating piston operated 54mm dia. air motor. Ideal for dispensing oils through multiple hose reels & metered gun systems found in large workshops utilizing bulk tanks. Suitable for use with oils upto SAE 140 over distances upto 30m, Diesel & Kerosene.

5:1 PUMP

Heavy duty industrial 5:1 ratio pump for dispensing oils at 5 times the pressure as the air inlet pressure. Reciprocating piston operated 104 mm dia. air motor. Ideal use with drums & tanks with one or multiple hose reels & dispensing systems . Suitable for use with oils upto SAE 140 over distances upto 50m, ATF, Engine Oils, Gear Oils

Air Operated Double Diaphragm Pumps - V Series

Specifically engineered with reduced parts ensuring maximum performance and unmatched reliability in variety of applications.

Truly Non-Lubricated Design : A non lubricated outside accessible air distribution system with no messy prepacked grease.

Energy Saving : 20% less air consumption over conventional pumps.

Fully Bolted Design : Quick tear down & rebuild, Hence negligible downtime during operation.

20% Fewer Wearing Parts : Low periodic maintenance is required

Self Priming : The pump design (incorporating internal check valves) allows for high suction lift even at dry start-up and with heavier fluids.

Explosion Proof : As pumps are operated by compressed air, therefore, they are intrinsically safe

Submersible : If external components are compatible, these pumps can be submerged in the liquid by simply running the exhaust line above the liquid level.

Air Operated Double Diaphragm Pumps

Double Diaphragm Pumps are designed for use in applications requiring large volume transfer in a short time. Driven by compressed air, these can transfer contaminated media & are very useful for cleaning out pits with mixed liquids such as oil, water etc. Handle a wide variety of fluids with solid content as there are no close fitting or rotating parts

Self Priming - Pump is designed for high suction lift even at dry start up & also with heavier fluids Ability to run dry, as there are no close fitting or sliding parts.

Portable/Simple Installation - Simply connect air supply line & liquid line; pump is ready to perform

Explosion Proof - Safe pumps since they are operated by compressed air

Pumping Efficiency Remains Constant - No rotors, gears or pistons that wear over time, hence no decline in performance

All pump models are designed for use with an inlet air pressure of 20-100 PSI

Air inlet threaded 1/4" NPT (F)

Pumps are available in a choice of 2 materials

i. Aluminium body with a Hytrel* diaphragm. These can be used for all high temperature applications

ii. Polypropylene - body with

a. Santoprene Diaphragm - for use with abrasives, acids, caustic etc.

b. Teflon (PTFE) Diaphragm - for use with fluids such as solvents.

Waste Oil Evacuation Kits

Ideal for use in workshops & garages for removing used oil from drains and delivering to the used oil sump tank.

Waste Oil Evacuation System includes:

1. Double Diaphragm pump

2. Filter Regulator combination

3. Two 8' PVC hoses, cam lock, Y-strainer, fittings

4. Pressure gauge and air hose

5. Wall mounting bracket

6. Clamping plate

7. PTFE tape

Electric Oil Pumps

Heavy duty oil pump designed to transfer bulk oils, hydraulic oils, used oil etc.

Air cooled motor with thermal protection. Non corroding aluminium die cast pump body. Sintered powder metal gears Self priming, positive displacement design. High horsepower to flow ratio assures adequate power to pump viscous fluids at low temperatures. Pump has an internal bypass valve to bypass flow, if the discharge pressure exceeds the bypass valve setting. Built-in 2" bung adaptor for mounting on drums/tanks. Can be used to transfer used oil with a screen fitted onto the suction tube.

Duty Cycle : 30 minutes ON / 30 minutes OFF

Available in following versions :

1. AC regular flow

2. AC high flow

3. DC regular flow

WETTED COMPONENTS : Aluminium, Steel, Cast Iron, Nylon, NBR, Zinc, Polypropylene, PVC

RECOMMENDED USE : For oils upto SAE 90, Synthetic Oils, Used Oils, Hydraulic Oils, Cutting Oils, Oil Based Herbicides, Non-Flammable Oil Based Solvents, Liquid Soap etc.

Mechanical Oil Meter

High pressure positive displacement meter suitable for in-line and end of line applications. Oval gear mechanism for optimum accuracy. High reliability Mechanical Display Robust Aluminum Die Cast construction with protective shroud on meter. Available in Litres / Quarts version

WETTED COMPONENTS : Aluminum, Stainless Steel, Nitrile Rubber & POM

RECOMMENDED USE : Oils with viscosity upto 2000 cSt, Diesel, Biodiesel

DO NOT USE WITH : Water based media, Gasoline etc.

Heavy Duty Electronic Oil Meter

High pressure positive displacement meter suitable for in-line and end of line applications

Oval gear mechanism for optimum accuracy 6 Digit non-resettable totaliser

Meter inlet/outlet threaded 1/2" BSP (F)

Electronic display using one 3V lithium Ion battery (CR2450)

Robust aluminium die cast construction with protective shroud on meter

Display can be rotated in every 90° orientation for ease of installation

Measures in litres, US gallons, quarts, pints, ounces & deciliters.

Easy user re-calibration

Mechanical Oil Control Gun

Super accuracy heavy duty gun for controlling fluid deliveries in most demanding applications. Oval gear mechanism High Reliability Mechanical Display. Aluminium Die cast meter & gun body. Built-in continuous flow switch can be activated for un-attended dispensing. Swivel at inlet for easy maneuverability. Strainer in the swivel keeps contaminants, dust, grit etc. away from entering the gun. Supplied complete with rigid steel extension and manual non drip nozzle

WETTED COMPONENTS : Aluminum, Steel, Brass, Stainless Steel, NBR & Acetal

RECOMMENDED USE : Oils with viscosity upto 2000 cST

DO NOT USE WITH : Water based media, Gasoline etc

Heavy Duty Electronic Oil Control Gun

Super accuracy heavy duty gun for controlling fluid deliveries in most demanding applications. Oval gear mechanism.

Electronic display using one 3V lithium Ion battery with life upto 5 years. Aluminium die cast meter &  gun body with protective shroud on meter. Built-in continuous flow switch can be activated for unattended dispensing. Built-in swivel at inlet for easy manoeuvrability. Strainer in the swivel prevents constmannts, dust, fgrit etc from entering the gun.Easy user re calibration. Supplied complete with rigid steel extension, with a manual non drip nozzle.

WETTED COMPONENTS : Aluminum, Acetal, Nitrile Rubber & Steel.

RECOMMENDED USE : Oils upto SAE 140, Diesel, Kerosene & Engine Coolants (RTU).

DO NOT USE WITH : Water Based Media, Petrol etc.

Electronic Pre-Set Oil Control Gun

Heavy duty oil control gun with robust aluminium construction.

Electronic preset design; works on 4 x 1.5V AA batteries.

Dual Mode: Manual & PreSet (dispenses set quantity of media & stops).

Oval gear mechanism for optimum accuracy.

Adjustable outlet nozzle can be positioned for in-line or 90° dispensing.

Resettable totalizer for individual batch can be set in litres, quarts, pints & gallons.

A second resettable totalizer for multiple dispensing operations can be set in litres, quarts, pints & gallons with max. pre-set volume of 99.9 units. Lifetime non-resettable totalizer can be set in litres. Built-in swivel at Inlet fitted with strainer. Supplied complete with steel extension with built-in non drip tip.

WETTED COMPONENTS : Aluminium, Steel, Stainless Steel, Brass, Polyurethane, Acetic Resin, Hi Nitrile Rubber

RECOMMENDED USE : Oils with viscosity in the range of 10 to 5000 cst, Diesel

DO NOT USE WITH : Petrol, Windshield Fluids etc.

Oil Control Guns

Heavy duty gun for controlling fluid deliveries in most demanding applications. Aluminum die cast construction. Built-in continuous flow switch can be activated for unattended dispensing. Swivel at inlet for easy manoeuvrability. Strainer in the swivel keeps contaminants, dust, grit etc. from entering the gun

WETTED COMPONENTS : Aluminum, Steel, Brass & NBR

RECOMMENDED USE : Oils with viscosity upto SAE 140

DO NOT USE WITH : Water based media, Petrol etc.

Transfer Gun

Dual action transfer gun : draws in & pumps out liquids in a single stroke. Easy & safe answer to fluid transfer, especially useful in transferring media unsafe for body contact. Gun body is non-denting & is made from heavy aluminum section. Suction head & piston have an aluminum construction & use viton piston rings. The gun comes complete with 8' of vinyl hose (4' with each valve)

WETTED COMPONENTS : Aluminum, Brass, Viton, PVC

RECOMMENDED USE : Fuel Oils, Mineral Oils, Synthetic & Biological Oils, Petrol, Coolants, Water, Spirits & Brake Fluids

Oil Cans - V Series

Tin coated steel body in premium powder coated finish.

Steel pump with double ball check.

Useful for convenient dispensing of oil.

Complete with 150 mm (6") rigid steel spout.

Hydraulic Oil Hoses

Hydraulic Rubber Hoses for use with Air Operated Oil Pumps

Hose exceeds SAE 100 R1

Specification :

Working Pressure 2,200 PSI (150 BAR)

Inner Dia: 1/2"

Outer Dia: 7/8"

Hydraulically crimped with steel fittings with 1/2" (M) threads on both ends.

Flexible Spout Measures

High density translucent polyethylene construction.

Used for transferring measured quantity of fluid.

Supplied complete with polyethylene flexible spout with cap and polypropylene lid.

Not to be used for measuring media for sale.

Smart Funnels

High density translucent polypropylene construction.

Designed with special contours in the funnel body for easy handling Anti-splash & spill proof, with curved rim.

Complete with wire mesh screen, dust cover & flexible spout.

Available in 2 sizes

a.  Funnel only

b.  Funnel with bung attachment for direct mounting on drums with 2" opening

Fuel & Oil Funnels

High flow fuel & oil funnel with extra large mouth for easy pouring.

Heavy Duty polyethylene construction for outdoor use over varying temperature conditions

Conical Funnels

Polyethylene funnels designed for use with virtually any media. Will never corrode or rust

WETTED COMPONENTS : Polyethylene

RECOMMENDED USE : Diesel, Gasoline, Kerosene, Urea, Oils, Antifreeze & Other Water based media

DO NOT USE WITH : Acids & other media at temperatures above 60°C