VICES & CLAMPS
Engineer's Steel Bench Vices
All steel construction. Fixed base with an integrated anvil for shaping and beating. Extra heavy-duty sliding jaw and large diameter screw. Forged tommy bar & steel main screw helps in effective transmission of pressure on the work piece.Hardened Jaws 50 ± 5 HRC. Safety stopper prevents slide from fall during usage
| CAT NR. | JAW WIDTH | JAW OPENING | THROAT DEPTH | NET WT. | |||
|---|---|---|---|---|---|---|---|
| (INCH) | (MM) | (INCH) | (MM) | (INCH) | (MM) | (KGS) | |
| EBV/F/100 | 4 | 100 | 4.3/4 | 120 | 3.5/32 | 80 | 6.3 |
| EBV/F/150 | 6 | 150 | 6 | 150 | 3.5/8 | 90 | 18 |
| EBV/F/200 | 8 | 200 | 8 | 200 | 4.3/8 | 110 | 37.5 |
Mechanic's Vices / Bench Vices
Manufactured from high quality grey iron castings with excellent shock absorbing capacity. Hardened jaws 45 ± 5 HRC. Unbreakable SG Iron nut. Perfect alignment of main screw & nut reduces wear giving long trouble free service. Smooth one finger operation.
| CAT NR. | JAW WIDTH | JAW OPENING | THROAT DEPTH | NET WT. | |||
|---|---|---|---|---|---|---|---|
| (INCH) | (MM) | (INCH) | (MM) | (INCH) | (MM) | (KGS) | |
| BV/F/75 | 3 | 75 | 4 | 100 | 2 | 50 | 5.5 |
| BV/F/100 | 4 | 100 | 5 | 125 | 2.5/32 | 55 | 9.7 |
| BV/F/125 | 5 | 125 | 6 | 150 | 2.3/4 | 70 | 14.7 |
| BV/F/150 | 6 | 150 | 7 | 175 | 3.5/32 | 80 | 18.2 |
| BV/F/200 | 8 | 200 | 8 | 200 | 4 | 100 | 30.4 |
G Clamps - General Purpose
SG iron construction with a tensile strength of over 60,000 PSI. Handle is designed to bend before the frame is over stressed. Steel main screw has ACME threads for smooth operation. Swivelling pad adopts the correct angle and applies even pressure on the work piece.
| CAT NR. | CAPACITY (C) | THROAT DEPTH (D) | FRAME PROOF LOAD | ||
|---|---|---|---|---|---|
| (INCH) | (MM) | (INCH) | (MM) | (KGS) | |
| GCL/13D/50 | 2 | 50 | 1.5/8 | 42 | 363 |
| GCL/13D/75 | 3 | 75 | 1.11/16 | 44 | 455 |
| GCL/13D/100 | 4 | 100 | 2.11/32 | 59 | 545 |
| GCL/13D/150 | 6 | 150 | 3 | 75 | 635 |
| GCL/13D/200 | 8 | 200 | 3.1/8 | 80 | 775 |
| GCL/13D/250 | 10 | 250 | 3.1/2 | 90 | 1000 |
| GCL/13D/300 | 12 | 300 | 4 | 100 | 1135 |
Spring Calipers & Dividers
Designed for taking comparative measurements & transferring the dimensions to a Micrometer, Vernier Calliper, precision rule. Dividers are used for marking out circles on
steel or transferring measurements from master templates.Calipers & dividers have a spring joint for precision settings. Adjustments are made by opening & closing of legs via an adjusting nut. Divider points are hardened 50-55 HRC for increased wear resistance
| CAT NR. | CAT NR. | CAT NR. | SIZE | |
|---|---|---|---|---|
| INSIDE CALIPERS | OUTSIDE CALIPERS | SPRING DIVIDERS | (MM) | (INCH) |
| ID/EC/4 | OD/EC/4 | DD/EC/4 | 100 | 4 |
| ID/EC/6 | OD/EC/6 | DD/EC/6 | 150 | 6 |
| ID/EC/8 | OD/EC/8 | DD/EC/8 | 200 | 8 |
| ID/EC/10 | OD/EC/10 | DD/EC/10 | 250 | 10 |
| ID/EC/12 | OD/EC/12 | DD/EC/12 | 300 | 12 |