Solid Block – Spherical Roller Bearing
Timken® spherical roller bearing solid-block housed units are designed for the most challenging circumstances. Made with cast-steel housings and Timken high-performance spherical roller bearings, these are the only spherical roller bearing housed units to offer steel solid-block housings as standard. In addition, Timken solid-block housed units can run efficiently on misaligned shafts up to ±0.75 degrees, without a reduction in life expectancy.
With a full line of precision-made locking styles and housings, these solid-block housed units offer protection from contaminants, particularly when used with the many available advanced primary and secondary seal options. Steel auxiliary covers are also available to create another layer of protection from harsh conditions. And, with the Timken bearing selection wizard, finding the right housed unit to fit your application is easy.
Solid Housing Design
Key Benefits of SHU over Split Block
| Drawback of Split Block Bearing | Advantage of Solid Block Housing |
|---|---|
| 90% of split-block bearings fail due to contamination | 14 different sealing options give Blue Brute bearings the highest level of contamination protection |
| Open to environment at installation | Completely sealed unit from the factory. Designed to go directly from shelf to the shaft. |
| Need to lubricate until grease purges, this is purging contamination from entering the bearing. | Pre-lubricated from the factory, Blue Brute bearings only require minimal re-lubrication intervals.
Excess grease is purged through specially designed seals or relief valves and will never compromise the integrity of the sealing. |
| Installation time up to 2 hours | Blue Brute bearings require less than 10 minutes installation time on any size shaft. |
| Traditional SN Blocks :
Single locking mechanism Limited sealing options Seals on shaft Open to contamination at installation |
Solid Block Housing :
5 minute installations on : QAASN, QASN, QMSN 10 minute installations on : QVSN, QVVSN, TAPN 6 unique locking styles 14 different sealing options |
Industries and Applications
- Metal Mills
- Aggregate and Cement
- Mining
- Power Generation
- Sawmills and Other Forest Products Industries
- Pulp and Paper
- Material Conveying
- Commercial and Industrial Building Products
- Sugar MillsAgriculture
- Waste Management and Waste Water Treatment
- Off-Highway and Construction Vehicles
- HVAC, Fans and Blowers
- Cranes, Lifts and Hoists