FLUOLOG
FLUOLOG represents a range of greases based on perfluorinated oils. FLUOLOG greases are recommended when the other lubricants, either mineral based or synthetic based, cannot meet the desired specifications.
ADVANTAGE[edit | edit source]
- Exceptional high temperature stability.
- Excellent chemical inertness (gas and aggressive liquids)
- Non-flammable
- Total compatibility with plastics and elastomers
- Very long life time
- Very low friction
- Very low vapor pressure
- Good resistance to nuclear radiations
- Non toxic
PRODUCTS[edit | edit source]
| Products | Viscosity | Thickener | Base oil | Temp. range °C | % Evaporation
after 24H | |
|---|---|---|---|---|---|---|
| 40°C mm2/s | Min | Max | ||||
| FLUOLOG K 258 | 8 | PTFE | PFPF | -70 | 80 | 10 / 90°C |
| FLUOLOG K 259 | 15 | PTFE | PFPF | -60 | 120 | 10 / 120°C |
| FLUOLOG KEL | 15 | PTFE | PFPF | -60 | 120 | 8 / 120°C |
| FLUOLOG LMX 2 | 85 | PTFE | PFPF | -70 | 220 | 2,5 / 200°C |
| FLUOLOG KEM | 90 | PTFE | PFPF | -40 | 200 | 2 /150°C |
| FLUOLOG LX 2 | 90 | PTFE | PFPF | -40 | 200 | 2 / 150°C |
| FLUOLOG KES | 220 | PTFE | PFPF | -30 | 250 | 0,5 / 150°C |
| FLUOLOG 2 L | 220 | PTFE | PFPF | -35 | 250 | 0,7 / 150°C |
| FLUOLOG MX 2 | 220 | PTFE | PFPF | -35 | 300 | 0,5 / 150°C |
| FLUOLOG MG 2 | 220 | GEL | PFPF | -35 | 250 | 0,5 / 150°C |
| FLUOLOG K 400 | 395 | PTFE | PFPF | -30 | 260 | 0,7 / 200°C |
| FLUOLOG K 500 | 500 | PTFE | PFPF | -30 | 300 | 0,3 / 200°C |