Difference between revisions of "STRIKING TOOLS"

From Catalog
Jump to navigation Jump to search
 
(4 intermediate revisions by the same user not shown)
Line 11: Line 11:
 
=== Specialty in GROZ Hammers ===
 
=== Specialty in GROZ Hammers ===
  
−
# STEEL LOCKING PLATE : locks head to the handle eliminating loosening or dislodging
+
# <u>STEEL LOCKING PLATE</u> : locks head to the handle eliminating loosening or dislodging
−
# HI-VISIBILITY HEAD : instant identification on any job site
+
# <u>HI-VISIBILITY HEAD</u> : instant identification on any job site
−
# VULCANIZED RUBBER HANDLE : Absorbs impact & vibration, reducing user fatigue. Protects user  in the event of striking an electrical wire. Made from special grade of ozone resistant rubber for use in tough outside environments. Handles on most head sizes weigh more than the head, allowing user to apply double the torque on any struck surface.
+
# <u>VULCANIZED RUBBER HANDLE</u> : Absorbs impact & vibration, reducing user fatigue. Protects user  in the event of striking an electrical wire. Made from special grade of ozone resistant rubber for use in tough outside environments. Handles on most head sizes weigh more than the head, allowing user to apply double the torque on any struck surface.
−
# DROP FORGED HEAD : with striking ends induction hardened. (50-58 HRC)
+
# <u>DROP FORGED HEAD</u> : with striking ends induction hardened. (50-58 HRC)
−
# SPRING STEEL BARS : 9/32" (7.1 mm) dia. spring steel bars resist overstrike without breaking
+
# <u>SPRING STEEL BARS</u> : 9/32" (7.1 mm) dia. spring steel bars resist overstrike without breaking
  
 
== Type of Hammers ==
 
== Type of Hammers ==
Line 30: Line 30:
  
 
=== Club Hammers ===
 
=== Club Hammers ===
−
[[File:SHID hard.jpg|thumb]]
+
[[File:Club Hammer .jpg|alt=GROZ Club Hammer|thumb|GROZ Club Hammer]]
−
UTILITY
+
Applications :
  
 
• Driving in stakes
 
• Driving in stakes
Line 40: Line 40:
  
 
• Minor demolition work
 
• Minor demolition work
−
 
−
UTILITY
 
  
 
• Construction
 
• Construction
Line 100: Line 98:
 
|300
 
|300
 
|}
 
|}
 +
[[File:SHID.jpg|alt=GROZ Sledge Hammer|thumb|GROZ Sledge Hammer]]
  
 
=== Sledge Hammers ===
 
=== Sledge Hammers ===
 +
Applications :
 +
 +
• Driving in stakes
 +
 +
• Heavy demolition work
 +
 +
• Construction: fracturing stone & concrete
 +
 +
• Driving fence posts
 +
 +
• Police, fire & rescue
 +
 +
• Rebar work
 +
 +
• Railroads
 +
 +
• Bending & shaping metal
 +
 +
• Construction
 +
 +
• Agriculture
 +
 +
• Automotive
 +
 +
• Overground mining
 +
 +
• Railroad
 +
 +
• Maintenance of cutting tools
 
{| class="wikitable"
 
{| class="wikitable"
 
! rowspan="2" |CAT  NR.
 
! rowspan="2" |CAT  NR.
Line 206: Line 234:
 
|900
 
|900
 
|}
 
|}
 +
[[File:Copper Heasd Sledge Hammer.jpg|alt=Copper Heasd Sledge Hammer|thumb|GROZ Copper Heasd Sledge Hammer]]
  
 
=== Copper Head Sledge Hammers ===
 
=== Copper Head Sledge Hammers ===
 
Hammer head is forged from 99.9% pure copper for spark free use. Copper head resists sparking & reduces marring of most struck surfaces
 
Hammer head is forged from 99.9% pure copper for spark free use. Copper head resists sparking & reduces marring of most struck surfaces
  
−
UTILITY
+
Applications :
  
 
• Metal forming
 
• Metal forming
Line 263: Line 292:
 
|750
 
|750
 
|}
 
|}
 +
[[File:Brass Head Sledge Hammer.jpg|alt=Brass Head Sledge Hammer|thumb|GROZ Brass Head Sledge Hammer]]
  
 
=== Brass Head Sledge Hammers ===
 
=== Brass Head Sledge Hammers ===
Line 322: Line 352:
 
|750
 
|750
 
|}
 
|}
 +
[[File:BALL PEIN HAMMERS.jpg|alt=GROZ Ball Pein Hammer|thumb|GROZ Ball Pein Hammer]]
  
 
=== Ball Pein Hammers ===
 
=== Ball Pein Hammers ===
Line 395: Line 426:
 
|350
 
|350
 
|}
 
|}
 +
[[File:CROSS PEIN HAMMERS.jpg|alt=GROZ Cross Pein Hammer|thumb|GROZ Cross Pein Hammer]]
  
 
=== Cross Pein Hammers ===
 
=== Cross Pein Hammers ===
Line 434: Line 466:
 
|400
 
|400
 
|}
 
|}
 +
[[File:CLAW HAMMERS.jpg|alt=GROZ Claw Hammer|thumb|GROZ Claw Hammer]]
  
 
=== Claw Hammer ===
 
=== Claw Hammer ===
Line 461: Line 494:
 
|330
 
|330
 
|}
 
|}
 +
[[File:DOUBLE FACE MALLET KIT.jpg|alt=GROZ Double Face Plastic Mallet|thumb|GROZ Double Face Plastic Mallet]]
  
 
=== Double Face Plastic Mallet ===
 
=== Double Face Plastic Mallet ===
 
Multi-purpose striking tool useful for a variety of applications in industrial, automotive, light engineering & metalworking: for striking surfaces that could get damaged by steel hammers. Chrome plated screw head with 2 screw-in replaceable heads. Tubular steel handle shifts the weight balance towards the head for extra power in each blow
 
Multi-purpose striking tool useful for a variety of applications in industrial, automotive, light engineering & metalworking: for striking surfaces that could get damaged by steel hammers. Chrome plated screw head with 2 screw-in replaceable heads. Tubular steel handle shifts the weight balance towards the head for extra power in each blow
−
 
  
 
Available with a choice of heads:
 
Available with a choice of heads:
Line 475: Line 508:
  
 
d. '''Copper Head''' : Provides a firm positive blow without any risk of marring the surface of highly finished expensive components
 
d. '''Copper Head''' : Provides a firm positive blow without any risk of marring the surface of highly finished expensive components
−
 
+
[[File:Plastic Head.jpg|alt=Plastic Head|thumb|Plastic Head]]
 +
[[File:Rubber Head.jpg|alt=Rubber Head|thumb|179x179px|Rubber Head]]
  
 
APPLICATION :  
 
APPLICATION :  
Line 491: Line 525:
 
• Assembly work when need to avoid damage to the surface of component & parts  
 
• Assembly work when need to avoid damage to the surface of component & parts  
  
−
• Jewellery Making
+
• Jewelry Making
 +
{| class="wikitable"
 +
!CAT NR.
 +
!DESCRIPTION
 +
|-
 +
|HMR/SF/25
 +
|Hammer
 +
|-
 +
|KIT/HMR/SF/4ST
 +
|Kit: Mallet with plastic & rubber head fitted, copper & brass  head as spares
 +
|-
 +
!SPARE HEADS
 +
|
 +
|-
 +
|HD/PR/HMR/25
 +
|Red plastic head
 +
|-
 +
|HD/PB/HMR/25
 +
|Black rubber head
 +
|-
 +
|HD/BR/HMR/25
 +
|Brass head
 +
|-
 +
|HD/CU/HMR/25
 +
|Copper head
 +
|}
  
 
=== Centre Punches Round Head ===
 
=== Centre Punches Round Head ===
 +
Carbon steel single piece construction with knurled round shank and round striking head. Accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. Working tip centred and ground to the correct angle (90° included angle). Rust inhibiting black oxide finish. Ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
 +
{| class="wikitable"
 +
! rowspan="2" |CAT  NR.
 +
! colspan="2" |POINT SIZE
 +
! colspan="2" |BODY DIAMETER
 +
! colspan="2" |OVERALL LENGTH (L)
 +
|-
 +
!(INCH)
 +
!(MM)
 +
!(INCH)
 +
!(MM)
 +
!(INCH)
 +
!(MM)
 +
|-
 +
|CP/5-64
 +
|5/64
 +
|2
 +
|5/16
 +
|8
 +
|4
 +
|100
 +
|-
 +
|CP/5-32
 +
|5/32
 +
|4
 +
|3/8
 +
|10
 +
|4
 +
|100
 +
|-
 +
|CP/1-4
 +
|1/4
 +
|6
 +
|7/16
 +
|11
 +
|5
 +
|125
 +
|}
  
 
=== Adjustable Tap & Reamer Wrenches Bar Type ===
 
=== Adjustable Tap & Reamer Wrenches Bar Type ===
 +
Extra heavy duty, industrial quality tap wrenches. Straight handle design of these tap wrenches provides greater leverage, particularly useful when working with large diameter taps.
 +
 +
Nr. 0, 5 & 6 have a forged body
 +
 +
Nr. 00, 7 & 8 have die cast body
 +
{| class="wikitable"
 +
! rowspan="3" |CAT  NR.
 +
! colspan="2" rowspan="2" |LENGTH
 +
! colspan="4" |JAW HOLDING  CAPACITY
 +
|-
 +
! colspan="2" |SQUARE SIZE
 +
! colspan="2" |TAP SIZE
 +
|-
 +
!(INCH)
 +
!(MM)
 +
!(INCH)
 +
!(MM)
 +
!(INCH)
 +
!(MM)
 +
|-
 +
|ARWR/SG/0
 +
|8
 +
|200
 +
|3/32-1/2
 +
|2.5-12
 +
|1/8-3/8
 +
|M1-M12
 +
|-
 +
|ARWR/SG/00
 +
|5.11/32
 +
|133
 +
|5/64-9/32
 +
|2-7.35
 +
|1/8-1/4
 +
|M1-M6
 +
|-
 +
|ARWR/SG/5
 +
|10.8
 +
|270
 +
|11/64-9/16
 +
|4.25-14.4
 +
|3/16-5/8
 +
|M4-M16
 +
|-
 +
|ARWR/SG/6
 +
|14.8
 +
|370
 +
|11/64-11/16
 +
|4.25-17.7
 +
|3/1 6-7/8
 +
|M4-M20
 +
|-
 +
|ARWR/SG/7
 +
|19.6
 +
|490
 +
|1/4-29/32
 +
|6.8-23.35
 +
|1/4-1.1/8
 +
|M6-M30
 +
|-
 +
|ARWR/SG/8  
 +
|29.6
 +
|740
 +
|3/8-1.13/32
 +
|9.2-36.0
 +
|1/2-1.3/4
 +
|M9-M45
 +
|}

Latest revision as of 15:22, 23 November 2021

Why GROZ Hammers ?[edit | edit source]

In our desire to build the world’s strongest Hammer, we tested our Indestructible Handle Sledge Hammer against Sledges with different handles. We attached each Sledge to an Electronic drive machine & tested for both Direct & Overstrikes at a strike rate of 80 blows per minute.

Testing of Hammers[edit | edit source]

WOOD HAMMER : BROKE IN 450 STRIKES IN DIRECT STRIKE TEST & 208 STRIKES IN OVERSTRIKE TEST

FIBRE GLASS : HAMMER BROKE IN 7,000 STRIKES IN DIRECT STRIKE TEST & 4,126 STRIKES IN OVERSTRIKE TEST

GROZ HAMMER : WE STOPPED COUNTING AFTER 36,000 STRIKES WITH NO INDICATION OF DEFORMATION IN BOTH DIRECT & OVERSTRIKE TESTS

Specialty in GROZ Hammers[edit | edit source]

  1. STEEL LOCKING PLATE : locks head to the handle eliminating loosening or dislodging
  2. HI-VISIBILITY HEAD : instant identification on any job site
  3. VULCANIZED RUBBER HANDLE : Absorbs impact & vibration, reducing user fatigue. Protects user  in the event of striking an electrical wire. Made from special grade of ozone resistant rubber for use in tough outside environments. Handles on most head sizes weigh more than the head, allowing user to apply double the torque on any struck surface.
  4. DROP FORGED HEAD : with striking ends induction hardened. (50-58 HRC)
  5. SPRING STEEL BARS : 9/32" (7.1 mm) dia. spring steel bars resist overstrike without breaking

Type of Hammers[edit | edit source]

Indestructible handle is made up of 4 spring steel bars that run all the way through the handle. Bars are locked with the hammerhead using steel locking plates ensuring that the head never gets dislodged. Ergonomic rubber grip handle absorbs vibration and reduces fatigue. Special bonding process ensures that the head never gets loose from the handle

These are available in 2 types:

Heavy Duty 50-58 HRC Head Forged from special steel, the hammer head is induction case hardened 50-58 HRC. These hammers are especially useful in demolition work where the struck surface is softer than the hammerhead.

Soft Face 30 HRC Head Forged from special steel , the hammer head is induction case hardened & then tempered to reduce hardness to within 30-35 HRC. Softer head is designed to mushroom when striking harder base materials. Prevents damage to struck work pieces.

  • Do not strike objects harder than 46 HRC. Striking items of a greater hardness is liable to cause fracture or chipping
  • WORKING TEMPERATURE RANGE : –10°C TO 50°C (14°F TO 122°F)

Club Hammers[edit | edit source]

GROZ Club Hammer
GROZ Club Hammer

Applications :

• Driving in stakes

• Metal-forming

• Setting bolts

• Minor demolition work

• Construction

• Metal forming

• Over ground mining

• Maintenance of cutting tools

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
HEAVY DUTY 52 HRC HEAD
CHID/2.5/12 2.5 1.1 12 300
CHID/4/12 4 1.8 12 300
CHID/4/16 4 1.8 16 400
SOFT FACE 30 HRC HEAD
CHID/SF/2. 5/12 2.5 1.1 12 300
CHID/SF/4/12 4 1.8 12 300
GROZ Sledge Hammer
GROZ Sledge Hammer

Sledge Hammers[edit | edit source]

Applications :

• Driving in stakes

• Heavy demolition work

• Construction: fracturing stone & concrete

• Driving fence posts

• Police, fire & rescue

• Rebar work

• Railroads

• Bending & shaping metal

• Construction

• Agriculture

• Automotive

• Overground mining

• Railroad

• Maintenance of cutting tools

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
HEAVY DUTY 52 HRC HEAD
SHID/6/24 6 2.7 24 600
SHID/6/30 6 2.7 30 750
SHID/8/24 8 3.6 24 600
SHID/8/30 8 3.6 30 750
SHID/8/36 8 3.6 36 900
SHID/10/30 10 4.5 30 750
SHID/12/30 12 5.5 30 750
SHID/14/30 14 6.3 30 750
SHID/20/36 20 9 36 900
SOFT FACE 30 HRC HEAD
SHID/SF/6/30 6 2.7 30 750
SHID/SF/8/30 8 3.6 30 750
SHID/SF/10/30 10 4.5 30 750
SHID/SF/12/30 12 5.5 30 750
SHID/SF/14/36 14 6.3 36 900
Copper Heasd Sledge Hammer
GROZ Copper Heasd Sledge Hammer

Copper Head Sledge Hammers[edit | edit source]

Hammer head is forged from 99.9% pure copper for spark free use. Copper head resists sparking & reduces marring of most struck surfaces

Applications :

• Metal forming

• Mining

• Underground coal mining

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
CHID/2.5/12/CU 2.5 1.1 12 300
CHID/2.5/16/CU 2.5 1.1 16 400
CHID/4/12/CU 4 1.8 12 300
CHID/4/16/CU 4 1.8 16 400
SHID/8/24/CU 8 3.6 24 600
SHID/14/30/CU 14 6.3 30 750
Brass Head Sledge Hammer
GROZ Brass Head Sledge Hammer

Brass Head Sledge Hammers[edit | edit source]

Drop forged brass head is spark resistant. It absorbs impact & reduces damage on the surface being hit. Also it can be used safely in combustible environments

Applications :

• Oil Rings

• Gas Industry

• Automotive

• Applications where the struck surface is soft

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
SHID/2.5/12/BR 2.5 1.1 12 300
SHID/2.5/16/BR 2.5 1.1 16 400
SHID/4/12/BR 4 1.8 12 300
SHID/4/16/BR 4 1.8 16 400
SHID/6/30/BR 6 2.7 30 750
SHID/8/30/BR 8 3.6 30 750
GROZ Ball Pein Hammer
GROZ Ball Pein Hammer

Ball Pein Hammers[edit | edit source]

Applications :

• Bending & shaping metal

• Driving punches & chisels

• Concrete & stone work

• Hand forging

• Setting rivets

• Peen riveted & welded material

• Texturing face of metal

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
HEAVY DUTY 52 HRC HEAD
BPID/16/14 450 16 14 350
BPID/20/14 565 20 14 350
BPID/24/14 680 24 14 350
BPID/32/14 900 32 14 350
BPID/48/14 1360 48 14 350
SOFT FACE 30 HRC HEAD
BPID/SF/24/14 680 24 14 350
GROZ Cross Pein Hammer
GROZ Cross Pein Hammer

Cross Pein Hammers[edit | edit source]

Applications :

• Heavy Forging

• Bending & Shaping Metal

• Spreading Metal

• Driving Punches & Chisels

• Driving Masonry Drills

• Concrete & Stone Work

• Starting Panel Pins & Tacks

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
CPID/2/16 2.5 1.15 16 400
CPID/3/16 3.5 1.6 16 400
GROZ Claw Hammer
GROZ Claw Hammer

Claw Hammer[edit | edit source]

Well shaped, curved claw is tapered for maximum grip & higher leverage when gripping a nail. Special bonding process ensures that the head never gets loose from the handle

Applications :

• Pulling Out Nails

• Lifting Floorboards

• Carpentry Work

CAT NR. HEAD WEIGHT OVERALL LENGTH
(LBS) (KG) (INCH) (MM)
CLID/16/13 16 450 13 330
GROZ Double Face Plastic Mallet
GROZ Double Face Plastic Mallet

Double Face Plastic Mallet[edit | edit source]

Multi-purpose striking tool useful for a variety of applications in industrial, automotive, light engineering & metalworking: for striking surfaces that could get damaged by steel hammers. Chrome plated screw head with 2 screw-in replaceable heads. Tubular steel handle shifts the weight balance towards the head for extra power in each blow

Available with a choice of heads:

a. Plastic Head : To lightly strike material without damaging or marring the surface. Used for piston cylinder assembly in engines, jewellery making etc

b. Rubber Head : To deliver cushioned strike. Used in sheet metal & aluminium fabrication jobs, installation of wheel hub caps in automotive assembly & maintenance

c. Brass Head : Used in denting & painting shops, fitting jobs without causing any damage to the work surface

d. Copper Head : Provides a firm positive blow without any risk of marring the surface of highly finished expensive components

Plastic Head
Plastic Head
Rubber Head
Rubber Head

APPLICATION :

• Light Engineering Jobs

• Injection Moulding

• Light Metal Working

• Denting & Painting

• Assembly & Fitting in automotive workshops

• Assembly work when need to avoid damage to the surface of component & parts

• Jewelry Making

CAT NR. DESCRIPTION
HMR/SF/25 Hammer
KIT/HMR/SF/4ST Kit: Mallet with plastic & rubber head fitted, copper & brass head as spares
SPARE HEADS
HD/PR/HMR/25 Red plastic head
HD/PB/HMR/25 Black rubber head
HD/BR/HMR/25 Brass head
HD/CU/HMR/25 Copper head

Centre Punches Round Head[edit | edit source]

Carbon steel single piece construction with knurled round shank and round striking head. Accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. Working tip centred and ground to the correct angle (90° included angle). Rust inhibiting black oxide finish. Ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.

CAT NR. POINT SIZE BODY DIAMETER OVERALL LENGTH (L)
(INCH) (MM) (INCH) (MM) (INCH) (MM)
CP/5-64 5/64 2 5/16 8 4 100
CP/5-32 5/32 4 3/8 10 4 100
CP/1-4 1/4 6 7/16 11 5 125

Adjustable Tap & Reamer Wrenches Bar Type[edit | edit source]

Extra heavy duty, industrial quality tap wrenches. Straight handle design of these tap wrenches provides greater leverage, particularly useful when working with large diameter taps.

Nr. 0, 5 & 6 have a forged body

Nr. 00, 7 & 8 have die cast body

CAT NR. LENGTH JAW HOLDING CAPACITY
SQUARE SIZE TAP SIZE
(INCH) (MM) (INCH) (MM) (INCH) (MM)
ARWR/SG/0 8 200 3/32-1/2 2.5-12 1/8-3/8 M1-M12
ARWR/SG/00 5.11/32 133 5/64-9/32 2-7.35 1/8-1/4 M1-M6
ARWR/SG/5 10.8 270 11/64-9/16 4.25-14.4 3/16-5/8 M4-M16
ARWR/SG/6 14.8 370 11/64-11/16 4.25-17.7 3/1 6-7/8 M4-M20
ARWR/SG/7 19.6 490 1/4-29/32 6.8-23.35 1/4-1.1/8 M6-M30
ARWR/SG/8   29.6 740 3/8-1.13/32 9.2-36.0 1/2-1.3/4 M9-M45
Retrieved from "https://catalog.jinharsh.co.in/index.php?title=STRIKING_TOOLS&oldid=18317"