Admin: 1 revision imported: Mitul Imported from Wikipedia

2021-04-11T19:44:36Z

1 revision imported: Mitul Imported from Wikipedia

setup>Spudlace: Reverted edits by Royal_Black_Loin (talk) (HG) (3.4.11)

2021-04-09T07:40:06Z

Reverted edits by Royal_Black_Loin (talk) (HG) (3.4.11)

New page

{{Short description|Mechanical bearing that connects two solid objects, typically allowing only a limited angle of rotation between them}}
{{Other uses}}
{{More citations needed|date=January 2017}}
[[Image:Hamburgerpaumelle.JPG|thumb|A barrel hinge]]

A '''hinge''' is a [[mechanical bearing]] that connects two solid objects, typically allowing only a limited [[angle of rotation]] between them. Two objects connected by an ideal hinge rotate relative to each other about a fixed [[axis of rotation]]: all other [[Translation (geometry)|translations]] or [[rotations]] being prevented, and thus a hinge has one [[degree of freedom]]. Hinges may be made of [[Flexure bearing|flexible material]] or of moving components. In [[biology]], many [[joint]]s function as hinges like the elbow joint.

==Door hinges==
[[File:Basic hinge.svg|thumb|Basic hinge]]
; Barrel hinge: A barrel hinge consists of a sectional barrel (the knuckle) secured by a pivot. A ''barrel'' is simply a hollow [[Cylinder (geometry)|cylinder]]. The vast majority of hinges operate on the barrel principle.
; Butt hinge / Mortise hinge: Any hinge which is designed to be set into a door frame and/ or door is considered to be a butt hinge or a [[Mortise and tenon|mortise]] hinge. A hinge can also be made as a half-mortise, in which case only one half of the hinge is mortised and the other is not. Most mortise hinges are also barrel hinges by virtue of how they pivot (i.e., a pair of leaves secured to each other by knuckles through which runs a pin).
; Butterfly/ Parliament (UK) hinge: These are a decorative variety of barrel hinge with leaves somewhat resembling the wings of a butterfly
; Case hinges: Case hinges are similar to a butt hinge however usually more of a decorative nature most commonly used in suitcases, briefcases, and the like.
;[[Concealed hinge jig#Concealed hinges|Concealed hinge]]: These are used for furniture doors (with or without self-closing feature, and with or without damping systems). They are made of two parts: One part is the hinge cup and the arm, the other part is the mounting plate. Also called "cup hinge", or "Euro hinge", as they were developed in Europe and use metric installation standards. Most such concealed hinges offer the advantage of full ''in situ'' adjustability for standoff distance from the cabinet face as well as pitch and roll by means of two screws on each hinge.
; Continuous/ Piano hinge: This variety of barrel hinge runs the entire length of a door, panel, box., etc. Continuous hinges are manufactured with or without holes.
; Flag hinge: these consist of a single leaf attached (in the male variety) to a pin. When used, the pin is inserted into the other (female) portion of the hinge. This allows the objects to be easily removed (for example, a removable door). They are manufactured in right-hand and left-hand configurations.
;H hinge: These barrel hinges are shaped like an H and used on flush-mounted doors. Small H hinges ({{convert|3|–|4|in|mm|abbr=on|disp=or}}) tend to be used for cabinets hinges, while larger hinges ({{convert|6|–|7|in|mm|abbr=on|disp=or}}) are for passage doors or closet doors.
; HL hinge: These were common for passage doors, room doors, and closet doors in the 17th, 18th, and even 19th centuries. On taller doors, H hinges were occasionally used in the middle along with the HL hinges.
; Pivot hinge: This hinge pivots in openings in the floor and the top of the door frame. Also referred to as a double-acting floor hinge. This type is found in ancient dry stone buildings and rarely in old wooden buildings. These are also called haar-hung doors. They are a low-cost alternative for use with lightweight doors.<ref>{{cite web|title=Pivot Hinges|url=http://www.guden.com/ItemDisplay/PivotHinges|website=Guden|access-date=15 December 2016}}</ref>
; Self-closing hinge:This is a spring-loaded hinge with speed control function. The same as ''spring hinge'', usually use ''spring'' to provide force to close the door and provide a mechanical or hydraulic damper to control door close speed. That can prevent door slamming problem while [[Door closer|auto closes a door]].<ref>{{cite web|title=Self-Closing Hinges|url=http://www.watersonusa.com/solutions/spring-loaded-door-hinge|website=Watersonusa|access-date=September 3, 2020}}</ref>
;Spring hinge: This is a spring-loaded hinge made to provide assistance in the closing or the opening of the hinge leaves. A ''spring'' is a component of a hinge, that applies force to secure a hinge closed or keep a hinge opened.<ref>{{cite web|title=Spring Hinges|url=http://www.guden.com/ItemDisplay/Spring-Hinges|website=Guden|access-date=15 December 2016}}</ref>
;Living hinge: This hinge takes advantage of the flexibility of plastic to create a join between two objects without any knuckles or pins. They are molded as a single piece, never become rusted, do not squeak, and have several other advantages over other hinges, but the plastic makes them more susceptible to breakage.

Other types include:
*Coach hinge
*Counterflap hinge
*Cranked hinge or storm-proof hinge
*Double action non-spring
*Double action spring hinge
*Flush hinge
*Friction hinge
*Lift-off hinge
*Pinge: A hinge with a quick release pin.
*Rising butt hinge
*Security hinge
*Tee hinge

==Building access==
Since at least [[medieval]] times there have been hinges to [[draw bridge]]s for defensive purposes for fortified buildings. Hinges are used in contemporary [[architecture]] where building settlement can be expected over the life of the building. For example, the [[Dakin Building]] in [[Brisbane, California|Brisbane]], [[California]], was designed with its entrance ramp on a large hinge to allow settlement of the building built on piles over [[bay mud]]. This device was effective until October 2006, when it was replaced due to damage and excessive ramp slope.

==Large structures==
Hinges appear in large structures such as elevated freeway and railroad viaducts. These are included to reduce or eliminate the transfer of bending stresses between structural components, typically in an effort to reduce sensitivity to [[earthquakes]]. The primary reason for using a hinge, rather than a simpler device such as a slide, is to prevent the separation of adjacent components. When no bending stresses are transmitted across the hinge it is called a ''zero moment hinge''.

== Spacecraft ==

People have developed a variety of self-actuating, self-locking hinge designs for spacecraft [[deployable structure]]s such as [[solar array]] panels, synthetic aperture radar antennas, booms, radiators, etc.<ref>
Alan M. Watt; and Sergio Pellegrino.
[http://www-civ.eng.cam.ac.uk/dsl/publications/TSR_hinge.pdf "Tape-Spring Rolling Hinges"]
p. 2.
</ref>

==Hinge terminology==

===Components===
;Pin: The rod that holds the ''leaves'' together, inside the ''knuckle''. Also known as a '''[[pintle]]'''.
;Knuckle: The hollow—typically circular—portion creating the joint of the hinge through which the ''pin'' is set. The ''knuckles'' of either ''leaf'' typically alternate and interlock with the ''pin'' passing through all of them. (aka. '''loop''', '''joint''', '''node''' or '''curl''')
;Leaf: The portions (typically two) that extend laterally from the ''knuckle'' and typically revolve around the ''pin''.

===Characteristics===
; End play: Axial movement between the ''leaves'' along the axis of the ''pin''. This motion allows the leaves to rotate without binding and is determined by the typical distance between ''knuckles'' (knuckle gap) when both edges of the ''leaves'' are aligned.
; Gauge: Thickness of the ''leaves''.
;Hinge width: Length from the outer edge of one ''leaf'' to the outer edge of the other ''leaf'', perpendicularly across the ''pin'' (aka '''open width''').
; Hinge length: The length of the ''leaves'' parallel to the pin.
; Knuckle length: The typical length of an individual ''knuckle'' parallel to the pin.
; Leaf width: Length from the center of the ''pin'' to the outer edge of the ''leaf''.
; Pitch: Distance from the end of a knuckle to the same edge of its adjacent knuckle on the same leaf
;Slop: A colloquialism referring to loose angular movement of the leaves relative to the pin.<ref>{{cite web|url=https://www.youtube.com/watch?v=Yy9Di5FWp6c|title=Jeep JK tail gate hinge slop|last=heyok|date=28 April 2014|via=YouTube}}</ref>

==Other types==
;[[tray|Butler tray]] hinge: Folds to 90 degrees and also snaps flat. They are for tables that have a tray top for serving.
;[[Carpentier joint]]: A hinge consisting of several thin metal strips of curved cross section.
;Card table hinge: Mortised into edge of antique or reproduction card tables and allow the top to fold onto itself.
;[[Drop-leaf table]] hinge: Mounted under the surface of a table with leaves that drop down. They are most commonly used with rule joints.
;Hinged [[handcuffs]]: a restraint device designed to secure an individual's wrists in proximity to each other consisting of two cuffs linked with a double or triple hinge. Hinged handcuffs cuffs tend to restrict movement more than chain-linked handcuffs, and they can be used to generate more leverage to force a suspect's hands behind the back, or to apply pain against the wrist, forcing the subject to comply and stop resisting.<ref>{{cite web|url=https://www.tactical-life.com/lifestyle/tactics/lifesaving-handcuffing-tactics/|title=On the Job: Lifesaving Handcuffing Tactics|date=30 December 2014}}</ref>
;Piano hinge: (or coffin hinge) a long hinge, originally used for [[piano]] lids, but now used in many other applications where a long hinge is needed.
;[[Living hinge]]: a hinge consisting of material that flexes

==Gallery==
<gallery>
File:HingesOldA.jpg|Old construction of hinges in the dry stone wall near [[Bignasco]].
File:HingesOldB.jpg|Ancient pivot hinges, found in the dry stone buildings.
File:Hingebifold.JPG|A flushed door hinge.
File:Hinge2P2.jpg|A barrel hinge made of wrought iron.
File:Hinge2P3.jpg|A barrel hinge made of bronze strap.
File:Hinge3P.jpg|Increasing the number of loops to 3 allows the butt hinge axis to be fixed from both ends.
File:Topfscharnier.jpg|Door in furniture with spring to lock door both fully shut and fully open positions. It hides completely behind the door and has adjustment for fine alignment. Allows the door to open even when against a wall.
File:Hinge 01.jpg|Rusty hinges on a building exterior.
File:Drzwi biegun 0211.jpg|This door hinges on the stile and is called a haar-hung door.
File:Mint box polypropylene lid.JPG|A living hinge on the lid of a [[Tic Tac]] box.
File:Hinged Handcuffs 1.jpg|Hinged [[handcuff]]s
File:Hinge 03.jpg|A piano hinge.
File:Continuoushinge.jpg|A continuous hinge.
</gallery>

==See also==
* [[Hinge bender]], a tool for adjusting hinges
* {{annotated link|Concealed hinge jig}}
* {{annotated link|Floating hinge}}
* {{annotated link|Geared continuous hinge}}
* {{annotated link|Plain bearing}}

==References==
{{Reflist}}

== External links ==
{{Wiktionary}}
{{Commons|Hinge}}
* [http://www.hingecraft.com/Terminology.html Hinge Terminology]—Hingecraft; graphics visualizing many terms
* [http://www.guden.com/Control/glossary Guden Hinges and Industrial Hardware: Glossary]

{{Authority control}}

[[Category:Hardware (mechanical)]]
[[Category:Door furniture]]
[[Category:Linkages (mechanical)]]
[[Category:Hinges| ]]

← Older revision	Revision as of 19:44, 11 April 2021
(No difference)

Hinge - Revision history

Admin: 1 revision imported: Mitul Imported from Wikipedia

setup>Spudlace: Reverted edits by Royal_Black_Loin (talk) (HG) (3.4.11)