Admin: 1 revision imported: Mitul Imported from Wikipedia

2021-04-11T19:42:46Z

1 revision imported: Mitul Imported from Wikipedia

setup>Citation bot: Removed parameters. | Use this bot. Report bugs. | Suggested by Jonesey95 | via #UCB_webform 118/456

2021-04-08T00:40:03Z

Removed parameters. | Use this bot. Report bugs. | Suggested by Jonesey95 | via #UCB_webform 118/456

New page

A '''cannon bearing''' or '''cannon box bearing''' is an arrangement of [[bearing (mechanical)|bearing]]s on a [[shaft (mechanical engineering)|shaft]], usually an [[axle]], where two bearings are mounted in an enclosed tube.

The function of the cannon box is to preserve the alignment of the two bearings, even if the overall tube is allowed to move. The two bearings will retain their same relative position. The bearing tube can be attached to the vehicle frame through either a pivot or springs.

The name 'cannon box' derives from the appearance of the hollow tube. Also from the [[John Wilkinson (industrialist)#Boring machine for steam engines|boring machine]]s used to machine the accurately aligned bearing seats, the same machines developed for the [[boring (manufacturing)|boring]] of [[cannon]] and also used for machining the [[cylinder (locomotive)|cylinder]]s of steam engines.

Cannon box bearings are still found today, although much of the need for them was removed by the development of [[self-aligning ball bearing]]s. These allow the inner race of a bearing to move independently of its outer, so that each bearing can align to both shaft and housing simultaneously, even if the housing moves around.

== Railway use ==
[[File:Java-Drehgestell.JPG|thumb|'[[Java bogie]]' of a Swiss-built {{illm|JGR class 7000|de|JGR-Klasse 7000}} electric locomotive]]
The 'cannon box' bearing was introduced by [[George Stephenson]] on his locomotive [[Locomotion No. 1|''Locomotion'']] of 1825 for the [[Stockton and Darlington Railway]].<ref name="Bailey, Locomotion" /> One of the axles was carried in a 'cannon box' bearing that was pivoted centrally and could tilt from side to side.<ref name="Bailey, Locomotion" /> Unlike Stephenson's [[Killingworth locomotives|earlier locomotive]]s and their [[steam spring]]s, this new suspension had no springing but was a compensated suspension: as one side was raised, the bearing tube pivoted and the other side was pushed downwards. Although not giving a stable ride for the locomotive, it did allow the wheels to follow uneven track. [[Fishbelly rail|Rail]]s of this period were short pieces of [[cast iron]] rather than lengths of rolled steel and had frequent, often misaligned, joints.

A side-effect of the cannon box is that the centre of the shaft is now enclosed and inaccessible. Previously Stephenson had coupled the driving axles of [[Killingworth locomotives|his locomotives]] with a central [[chain drive|chain]]. The need for an alternate system spurred the development of the [[coupling rod]]s,<ref name="Bailey, Locomotion" /> where the drive was connected on the outside face of the wheels.

The enclosure of the shaft and bearing also had advantages for enclosing the bearings to exclude dirt and to contain lubricating oil.<ref name="Ransome-Wallis" />

[[Francis Webb (engineer)|Francis Webb]]'s form of [[radial axle]] design for the [[London and North Western Railway|LNWR]] used a cannon box. A radial axle is a form of single axle pony truck, where instead of a pivoted frame, the two axle bearings can slide sideways in a circular track. Webb's design placed them into a curved cannon box. [[David Joy (engineer)|David Joy]], designer of [[Joy valve gear|the eponymous valvegear]], described encountering these axleboxes on Webb's [[LNWR Precedent Class|Precedent class]].<ref >{{Cite book
|title=Diaries
|date=September 1884
|first=David |last=Joy
|authorlink=David Joy (engineer)
|url=http://www.steamindex.com/library/joydiary.htm
}}</ref> The earlier [[Adams axle|Adams design]] for a similar axle had relied on the axle and thrust-faces within the axle bearings to keep the hornblocks in position.

In the 1920s, some electric locomotives used [[Rigid-framed electric locomotive|rigid frames]] with a leading and trailing truck, where a cannon bearing was a convenient inside-framed bearing for the truck. The Swiss '[[Java bogie]]' design, developed by [[Jakob Buchli]], even used this for a driving axle, with the drive provided by a one-sided [[Buchli drive]] outside the wheels.

Roller bearings, and their enclosing cannon boxes, were used for the British Railways Standard classes, on bogie axles and also on the driving axles of some of the larger classes.<ref name="Allen, 1959, 37" /> This use was simplified, as the Standard classes (with the unique exception of the single [[BR Standard Class 8|Class 8]]) had just two outside cylinders. Railway use of such bearings continues today. The [[LNER Peppercorn Class A1 60163 Tornado|Peppercorn Class A1 ''Tornado'']] replica uses roller bearings rather than the original plain bearings and these use cannon tube bearings for both the driving and bogie axles, although not for the central cylinder's crank axle.<ref name="Tornado" />

The rigidity of the cannon box also allows the faces of the axleboxes which move up and down in the [[hornguide]]s to only need a single horn flange. Conventional axleboxes have a pair of flanges with the guide between them, so that they can move up and down for suspension without any axial movement. If they are both held at the correct spacing by the cannon tube, only one flange is needed.<ref name="Ransome-Wallis" /> The thinner axlebox, without the external flange, can allow the hornguides and frames to be placed closer to the inner face of the wheel, giving better support for a heavily-loaded axle.

== Traction engines ==
[[Traction engine]]s began as agricultural vehicles and ignored springing or suspension on their main wheels. As [[light steam tractor]]s developed from 1896 for [[road haulage]] though,<ref name="Whitehead, 25" /> locomotives with solid rubber tyres and suspension became favoured. The driving wheels of a traction engine are carried on a single axle, running closely behind the rear plate of the boiler firebox and carried in bearings fitted to the hornplates on either side of the boiler. Where springs were used, the cannon box bearing was favoured for maintaining the bearing alignment, with a further advantage of enclosing the axle away from the coal and ash from the firebox. Designs such as the [[Tasker & Sons|Tasker]] ''Little Giant''{{sfnp|Whitehead|1970|page=27}}<ref name="ASC, 1911" /> used another compensated suspension, where the tube was suspended from a single transverse [[leaf spring]].

== References ==
{{Reflist|refs=

<ref name="Bailey, Locomotion" >{{Cite book
|title=Loco Motion
|chapter=The George Stephenson Types, 1820s
|last=Bailey |first=Michael R.
|year=2014
|publisher=The History Press
|isbn=978-0-7524-9101-1
|pages=35–36
}}</ref>

<ref name="Tornado" >{{Cite web
|title=Significant Progress
|website=[[LNER Peppercorn Class A1 60163 Tornado|Tornado Trust]]
|date=29 April 2009
|url=https://www.a1steam.com/2009/04/29/1999/
}}</ref>

<ref name="Whitehead, 25" >{{Cite book
|title=The Age of the Traction Engine
|last=Whitehead |first=Robert A.
|year=1970
|publisher=[[Ian Allan Publishing|Ian Allan]]
|isbn=0-7110-0129-4
|chapter=1: Origins and Makers
|page=25
}}</ref>

<ref name="ASC, 1911" >{{Cite book
|title=Army Service Corps Training, Mechanical Transport
|section='Little Giant' Tractor
|year=1911
|pages=194–195
}}</ref>

<ref name="Allen, 1959, 37" >{{Cite book
|title=British Railways today and tomorrow
|first=G. Freeman |last=Allen
|authorlink=G. Freeman Allen
|publisher=[[Ian Allan Publishing|Ian Allan]]
|year=1959
|page=37
}}</ref>

<ref name="Ransome-Wallis" >{{Cite book
|title=Encyclopedia of World Railway Locomotives
|series=Dover Transportation
|editor-first=P. |editor-last=Ransome-Wallis
|publisher=Courier Corporation
|orig-year=1959
|year=2001
|isbn=0486412474
|pages=243,245
|ref={{harvid|Ransome-Wallis|1959}}
}}</ref>

}}

[[Category:Bearings (mechanical)]]

← Older revision	Revision as of 19:42, 11 April 2021
(No difference)

Cannon bearing - Revision history

Admin: 1 revision imported: Mitul Imported from Wikipedia

setup>Citation bot: Removed parameters. | Use this bot. Report bugs. | Suggested by Jonesey95 | via #UCB_webform 118/456