Catalog - User contributions [en]

FLASHLIGHTS

2022-08-29T13:25:57Z

Bhavinrathod:

=== 3W COB Rechargeable Pen Light (LED/335) ===
{| class="wikitable"
| rowspan="2" |
| colspan="2" |MAIN LIGHT
| colspan="2" |TOP TORCH
|-
|LUMEN
|RUN TIME
|LUMEN
|RUN TIME
|-
|FULL INTENSITY
|

180
|

1.5-2 hours
|

65
|

2-2.5 hours
|}

=== 3W LED Inspection Lamp (LED/321) ===

=== 2W COB Rechargeable Pocket Flashlight (LED/150) ===

=== 3W LED Slim Pen Light (LED/160) ===
{| class="wikitable"
|
|1ST PRESS
|2ND PRESS
|3RD PRESS

& HOLD
|4TH PRESS
|-
|
|HIGH INTENSITY
|LOW INTENSITY
|QUICK FLASHING
|SOS FLASHING
|-
|LUMEN
|150
|60
| rowspan="2" |
| rowspan="2" |
|-
|RUN TIME
|2.5 hrs
|8 hrs
|}

=== Telescopic Magnetic Pick-Up Light (LED/131) ===

=== 360˚ Swivel Rechargeable Work light (LED/360) ===
{| class="wikitable"
| rowspan="2" |
| colspan="2" |HIGH INTENSITY
| colspan="2" |LOW INTENSITY
|-
|LUMEN
|RUN TIME
|LUMEN
|RUN TIME
|-
|WORKLIGHT
|400
|3 hours
|200
|7 hours
|-
|TOP TORCH
| colspan="4" |120 lumen with a run time of 8 hours
|}

=== 3W COB Pocket Flashlight (LED/140) ===

WORKLIGHTS

2022-08-29T13:20:40Z

Bhavinrathod: /* Product Range */

[[File:COB Tech.jpg|alt=COB LED Technology|thumb|209x209px|COB LED Technology]]
GROZ Worklights are made with new generation COB LED. Chip On Board LED offer many advantages over the standard options. COB LEDs are basically multiple LED chips bonded directly to a substrate by the manufacturer to form a single module. Being multi-chip packaged, the light emitting area of a COB LED can contain many times more light sources in the same area that standard LEDs could occupy resulting in a greatly increased lumen output per square inch. Another aspect of COB LEDs that reduces failure rates is the fact that spot soldering of the individual LED chips is not necessary as each chip is directly mounted onto the substrate. The smaller amount of welding points results in lowering the rate of failure.

== Why GROZ Worklight ? ==

* Specially designed for different application
* IK 07 Rated Impact proof construction
* Rechargeable Lithium Battery
* Multiple Working Modes
* Waterproof Design
* IP 54 Rated Protected against dust and effects of moisture from any direction

== Product Range ==

=== 30W COB RECHARGEABLE WORKLIGHT ===
{| class="wikitable"
! rowspan="2" |

CAT NR.
! rowspan="2" |DESCRIPTION
! colspan="2" |SIZE
|-
!(INCH)
!(MM)
|-
!LED/670
|Worklight
|9.5 x 10 x 5
|24 x 26 x 13
|-
!LED/670T
|Worklight mounted on tripod
|46 × (48 to 75-1/2) × 46
|117 × (122 - 192) × 117
|}

=== HEAVY DUTY RECHARGEABLE COB WORKLIGHT ===
{| class="wikitable"
! rowspan="2" |CAT NR.
! rowspan="2" |DESCRIPTION
! colspan="2" |SIZE
|-
!(INCH)
!(MM)
|-
!LED/550
|10W COB
|6-11/16 × 5
|170 × 125
|-
!LED/560
|20W COB
|7-9/32 × 5-1/2
|185 × 140
|}
{| class="wikitable"
!CAT NR.
!LED/550
!LED/560
|-
|WATTS
|10W COB
|20W COB
|-
|BATTERY
|3.7V, 4400mAh Li-ion
|7.4V, 4400 mAh Li-ion
|}
{| class="wikitable"
|INTENSITY
|100%
|50%
|100%
|50%
|-
|LUMEN
|1000
|500
|2000
|1000
|-
|RUN TIME
|3 hours
|6 hours
|3 hours
|6 hours
|-
|CHARGING TIME
|5 hours
|5 hours
|5 hours
|5 hours
|}
=== 18W LED RECHARGEABLE WORKLIGHT (LED/621) ===
{| class="wikitable"
|
|MODE 1
|MODE 2
|MODE 3
|-
|TYPE
|High Intensity
|Low Intensity
| rowspan="3" |SOS Flashing
|-
|RUN TIME
|3-3.5 hours
|10.5-11 hours
|-
|LUMEN
|1000
|300
|}

=== 7W LED Waterproof Spotlight (LED/402) ===
{| class="wikitable"
|
|1ST PRESS
|2ND PRESS
|3RD PRESS
|4TH PRESS & HOLD
|-
|TYPE
|HIGH INTENSITY
|LOW INTENSITY
|SOS FLASHING
|RED FLASHING
|-
|LUMEN
|700
|350
| rowspan="2" |
| rowspan="2" |
|-
|RUN TIME
|1.5 -2 hrs
|4 - 4.5 hrs
|}
{| class="wikitable"
|'''MAX. LUMEN'''
|'''WATER & DUST PROOF RATING'''
|'''BEAM DISTANCE'''
| colspan="2" |'''OPERATING'''

'''BEAM ANGLE TEMPERATURE'''
|-
|700
|IP67
|400M (1312')
|70°
|−10°C TO +45°C (33.8'''°'''F TO 140'''°'''F)
|}

=== 15W COB Rechargeable Under-hood Light (LED/351) ===
{| class="wikitable"
|
|HIGH INTENSITY
|MEDIUM INTENSITY
|LOW INTENSITY
|-
|NR. OF LAMPS USED
|3
|2
|1
|-
|LUMEN
|1000
|700
|350
|-
|RUN TIME
|3-3.5 hours
|4.5-5.5 hours
|6.5-7.5 hours
|}

=== 7W COB Rechargeable Worklight (LED/345) ===
{| class="wikitable"
|MODES
|HIGH INTENSITY
|MEDIUM INTENSITY
|LOW INTENSITY
|-
|LUMEN
|650
|400
|200
|-
|RUN TIME
|4 hours
|6 hours
|11 hours
|}

Home

2022-08-25T19:14:24Z

Bhavinrathod:

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, [[Fafnir]]
* [[ABB Motors]]
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], [[Link-Belt Bearing|Link-Belt]], Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - [https://www.facebook.com/jinharsh Facebook], [https://www.instagram.com/jinharshgroup/ Instagram], LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====
TEST : google-site-verification=AZ5SX4zoqud8jgD551OkMCUxRE0l9-h2-qvq-I6u3ko

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Home

2022-08-23T09:47:29Z

Bhavinrathod: /* Contact Us at Jinharsh */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, [[Fafnir]]
* [[ABB Motors]]
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], [[Link-Belt Bearing|Link-Belt]], Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - [https://www.facebook.com/jinharsh Facebook], [https://www.instagram.com/jinharshgroup/ Instagram], LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Home

2022-08-16T17:13:51Z

Bhavinrathod: /* Brands */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, [[Fafnir]]
* [[ABB Motors]]
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], [[Link-Belt Bearing|Link-Belt]], Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Automatic lubrication systems

2022-08-16T10:58:53Z

Bhavinrathod: /* Barrel Pumps */

== Single-Line Lubrication ==
In single line systems, there is one primary line connecting the pump with the divider blocks and injectors.

=== BEKA Xlube ===

* The BEKA Xlube is an electrically operated gear pump unit and is a commonly used system for industrial applications. It’s a versatile system and can be used to lubricate the lubrication points with either oil or fluid greases in a single-line system.

=== BEKA Mini 2 & Super 3 Series ===

* The BEKA® Mini 2 and BEKA® Super 3 systems are electrically operated gear pump units and are used in single-line systems to lubricate the lubrication points with either oil or fluid greases.

=== BEKA ES/EA Series ===

* The BEKA® ES-AS Series is a complete range of gear pumps to automatically lubricate lubrication points with fluid grease or oil. The ES-EA Series is a single-line system and is available with a wide range of reservoirs or as a gear pump only, without a reservoir.

=== P-Series ===

* These pneumatically actuated piston pumps are designed for periodically operated, single-line lubrication for industrial applications, like expanded metal machinery or textile machinery. The P-Series feature a range of pump types compatible with oil and fluid greases. • Simple handling • Optional low-level control for reservoir

=== Groeneveld SingleLine ===
Parallel NLGI-0 automatic lubrication system with reservoir

* The SingleLine automatic lubrication system has a parallel operation and is suitable for up to NLGI-0 grease. The SingleLine is developed for equipment with a large number of lubrication points, such as low-loaders, articulated buses, trucks with drum brakes and trailers with steered axles. This lubrication system is used all over the world to ensure efficient and effective lubrication.

== Dual-Line Lubrication ==
A dual line system is comparable to the single line system, except that this system has two primary lines that are used alternately to pressurise and depressurise.

=== Groeneveld Twin ===
Parallel NLGI-2 heavy-duty automatic lubrication system

* Twin is designed for the most demanding applications with many lubrication points or long line lengths, extreme temperatures and where system reliability is crucial. This product offers great benefits and can contribute to an excellent return on investment.

=== Groeneveld Twin XL ===
Heavy-duty NLGI-2 automatic lubrication system

* Twin XL is a dual-line automatic lubrication system for large machines used for earthmoving and mining operations in extreme conditions. As a parallel operation with two lines, Twin systems pump GreenLube grease efficiently to all points.

== Multi-Line Lubrication ==
In a multi-line system, grease is led directly from the injectors in a pump through their own pipes to a lubrication point.

=== BEKA TDM Series ===
The BEKA TDM-Series is a range of multi-line systems for oil lubrication used in all fields of mechanical engineering. Within the TDM-Series there are 2 pump types available, the TDM and the TDM-FS(U). The TDM-FS(U) has a higher output rate and lower drive speed, making this pump system more applicable for small diesel engines, compressors, vacuum

pumps, tool machines, textile machines etc.

The TDM is more commonly used for combustion engines, small compressors, textile- tool- and wood processing machines.

* TDM-4
* TDM-8
* TDM-FS 4
* TDM with motor
* TDM-FSU 4

=== BEKA A-Series ===
Robust and durable multiline oil lubrication system. The A-Series consist of a range of oil lubrication pumps for use in a multi-line system. Almost all pumps in the A-Series are mechanically driven, except for the AFG-M and the APG-M who are electrically driven.

The pumps in the A-Series are the central element of a multi-line oil lubrication system. Different oil containers can be individually attached to the pump.

• Compact design and therefore just a little mounting space needed

• Robust pump with long lifetime and low operating costs

• Available with mechanical or electrical drive and therefore suitable for many applications

• Up to 12 outlets with pairwise adjustable output

• The pump can be delivered completely pre-assembled according to customer specifications with predefined lines and line lengths (plug and play)

* AZU
* APG-M
* AFG-M
* AFL
* AFL-H

=== BEKA D-Series ===
Robust and durable multiline oil lubrication system. The D-Series consist of a range of oil lubrication pumps for use in a multi-line system. Almost all pumps in the D-Series are mechanically driven, except for the DFG-M which is electrically driven.

The pumps in the D-Series are the central element of a multi-line oil lubrication system. Different oil containers can be individually attached to the pump.

• Compact design and therefore just a little mounting space needed

• Robust pump with long lifetime and low operating costs

• Available with mechanical or electrical drive and therefore suitable for many applications

• Up to 12 outlets with pairwise adjustable output

* DU
* DP
* DFG
* DFG-M

=== BEKA K-Series ===
The BEKA K-Series is a range of electromagnetic driven piston pumps with up to 6 lubrication outlets, used to lubricate with oil or fluid greases up to NLGI-0. The complete series contains a variety of different pump types which are preferably used for precise lubrication, like with chain lubrication.

=== Groeneveld MultiLine AC ===
The MultiLine AC is a range of automatic lubrication systems designed for self-install on fifth wheels, tail lifts and trailers. This product enables the use of automatic lubrication on transport applications, where the return on investment can be challenging. Reservoirs come in sizes of 1.25, 2 or 3 liters. With all greasing points lubricated automatically, service intervals and the lifetime of equipment is extended. The kit is ready to be installed by your technicians.

=== Groeneveld MultiLine AXL ===
MultiLine AXL enables the use of automatic lubrication on conveyor belts, bearings, chains and gears. The MultiLine AXL kit is ready to install by your technicians and service is only a phone call away from Groeneveld-BEKA offices all over the world.

=== Groeneveld-BEKA GM ===

== Progressive Lubrication ==
Progressive systems provide the various lubrication points with grease by means of progressive divider blocks. Progressive means that all lubricating points, each in turn, are provided with grease.

=== BEKA HPG-2 ===
The hydraulic HPG-2 is a robust and compact central lubrication pump with an integrated progressive distributor. This distributor can be used to supply directly to lubrication points or secondary progressive distributors.

An ideal solution for numerous applications like disc harrows, ploughs, front equipment of telescopic loaders, mini excavators and hydraulic attachments.

=== BEKA HPM-2S ===
The hydraulic HPM-2S is a robust and compact central lubrication pump, suitable for use in combination with progressive distributors.

An ideal solution for numerous applications like disc harrows, ploughs, front equipment of telescopic loaders, mini excavators and hydraulic attachments.

=== BEKA HPM-3 ===
The hydraulic HPM-3 is a robust and compact single-shot pump for hammer lubrication.

An ideal solution for compact hydraulic breakers. The special design of the pump allows to deliver lubricants with high solid content like chisel paste. No application is like an other.

=== BEKA HPH-2 ===
The hydraulic HPH-2 is a robust single-shot pump.

An ideal solution for hydraulic breakers, scrap shears, multi processors and concrete cutters.

The design of the pump allows to deliver lubricants with high solid content like chisel paste (for hydraulic breakers) as well as normal NLGI-2 class grease (for the other above mentioned applications). The HPH-2 can deliver grease to a progressive distributor.

=== BEKA HAMAX ===
BEKA HAMAX hydraulic pumps guarantee the lubrication of hydraulicly operated attachments for construction and agricultural machinery which are suitable for use in combination with progressive distributors.

The special design of the pumps allows to deliver lubricants with high solid content like chisel paste. No application is like an other.

BEKA HAMAX offers tailor-made solutions, enabling ideal lubrication for each application. An ideal system to lubricate automatically hydraulic breakers, clamshell buckets, scrap shears, screening and crushing buckets, orange grapples and demolition grabs.

=== BEKA ZEPTO ===
The electric cartridge pump ZEPTO is designed to provide lubricant within a central lubrication system (for example, a progressive system) or to single lubrication points. ZEPTO can be used for lubrication of smaller machines and systems with up to 30 lubrication points.

With the intelligent pump control, it not only notifies you of a minimum fill level of the cartridge, you can also set whether it will appear sooner or later. The refilling process self is easier and cleaner than ever.

Enjoy the tool-free and easy adjustability of the pump control to lubricate precisely without wasting money and time. With the green / red display, a quick glance at the pump is enough and you know that your machine is well maintained.

=== BEKA PICO ===
The PICO system combines power and flexibility in perfect conditions with a compact design.

The PICO pump is the worldwide unique combination of progressive- and multi line technology. The basic version contains the PICO pump with a progressive distributor that supplies lubricant to the lube points. In addition to this up to 8 lube points can be supplied directly. If necessary the system can be enlarged by a second progressive cycle.

The PICO system is designed modular and suitable for all common vehicles and trailers.

=== Groeneveld-BEKA GP ===
Decades of experience has resulted in the development of this brand-new automatic lubrication concept. Designed for progressive systems, this Groeneveld-BEKA GP pump will provide every single lubrication point with the right amount of grease.

The GP series is designed for progressive lubrication on mobile applications like tippers, mobile cranes, garbage trucks, compact construction equipment, agricultural machines, telehandlers and reach stackers. The pump is easy to adjust and adaptable to the lubrication needs of the machine.

The GP pump consists out of three elements: the top, central and lower modules. Experienced engineers will design the perfect system for your application. This ensures that the application will be greased by a well aligned system.

=== BEKA EP-1 ===
The EP-1 is a tried-and tested grease pump for progressive lubrication systems.

With reservoirs from 1.9 to 16 kg, different electronic control units and heavy duty components, the EP-1 is suitable for most mobile and stationary applications.

The desmodromic actuation of the pump elements guarantees high operational reliability even with low temperatures or rigid grease.

During the vehicle operation, the EP-1 central lubrication supplies each lube point with the necessary grease quantity - absolutely reliable, electronically precise controlled and exact metered. Each bearing receives the necessary lubricant quantity it needs. And everything without annoying downtimes!

=== BEKA FKG-EP Series ===
The BEKA® FKG-EP Series is a range of electrically actuated pumps with up to 8 lubrication outlets, depending on the pump type. The complete series contains a wide range of different pump types which are commonly used as a progressive lubrication system for a variety of industrial applications. The versatility of the system also makes it possible to set-up the system as a single line lubrication system.

The pumps in the FKG-EP Series are able to work with commercial greases from NLGI-000 up to NLGI-2.

Pump models : FKGGM-EP, FKGGM-EPR, FKGM-HP

=== Groeneveld TriPlus ===
TriPlus is a unique progressive lubrication system that offers the possibility of three independently operating circuits. It is the ultimate solution for machines and vehicles which have different components requiring different lubrication, such as wheeled excavators, cement pumps or mixers and backhoe loaders.

=== BEKA GIGA ===
With grease reservoirs sizes from 4 to 30 liters, the GIGA is the ideal pump of a medium to large central lubrication system. Up to 3 independent from each other lubrication cycles can be connected to the central lubrication pump. On the other hand, the lubricant quantities of up to 3 pump elements can be brought together via internal channels.

Clever design makes the GIGA pump usable for progressive, single line, dual line and sectional systems.

The modular GIGA pump is available in three control configurations:

* Without controller (to connect the pump directly to the vehicles or machine electronics.
* Basic controller: GIGA Tronic
* Advanced controller with display: GIGA Multitronic

Thanks to the modular structure, pumps can be customized from the simplest configuration and function to complex monitoring of the entire central lubrication system.

== Single Point Lubricators ==
For all applications with single lubrication points, like motors, drives, bearings, chains and compressors

The BEKAONE is especially designed for situations where an automatic lubrication system is too large or too complex. BEKAONE single point lubricators are an ideal solution to supply lubricants to individual greasing points in a safe, precise and reliable way.

'''Product range'''

* BEKAone120
* BEKAone120+
* BEKAone250

== Oil and air lubrication ==
Oil and air lubrication is the perfect solution to lubricate bearings, especially high speed bearings. Additional fields of application include chains, gear trains and other industrial applications.

The BEKA P26-series contains a range of pneumatic piston pumps used for oil and air lubrication. Oil and air lubrication is the perfect solution to lubricate bearings, especially high speed bearings. Additional fields of application include chains, gear trains and other industrial applications.

The P26-series pumps function as a multi-line pump where the lubricant gets directly transported to the lubrication points via an air-flow. The lubrication point is continuously supplied with a flow of lubricant and air.

The P26-series give you the possibility to create an simple and economical system for oil-air lubrication up to 6 lubrication points. Systems are available in various configurations and with different oil reservoir sizes, and will be configured individually for each application.

== Oil circulation ==
Contains a range of gear pumps used to supply oil or oil-like lubricants that have sufficient lubrication characteristics.

=== BEKA FL/MZ Series ===
The BEKA FL/MZ Series contains a range of gear pumps used to supply oil or oil-like lubricants that have sufficient lubrication characteristics. The complete series contains the FL-Series (flange pumps), the U-Series (foot pumps), and the MZ-Series (motor pumps).

FL-Series

Flange pumps in the FL-Series are mainly meant for the direct drive of machines via a coupling, e.g. in tooling machines, compressors, or high-pressure pumps. The flange gear pumps are manufactured for clockwise or counterclockwise rotation, with different flow directions. A constant direction of delivery for both rotation directions is optionally possible.

U-Series

The flange pumps are also available as a foot pump, which basically only differs from the flange pumps by their mounting location.

MZ-Series

Motor pumps are available in horizontal and vertical directions. Pumps in a horizontal construction can be used universally. Next to the direct installation onto a reservoir, the pump can also be installed at a machine and suck the lubricant up to a suction height of 1 meter from an oil sump. Pumps in vertical directions are mainly used for space-saving installations in reservoirs.

Pumps in the FL/MZ Series are available as an external gear pump as well as an internal gear pump. Internal gear pumps are able to handle higher operating pressures up to 100 bar and have a lower sound pressure level compared to the external gear pumps which already have a low noise level.

=== BEKA Oil Circulation Systems ===
Gearboxes and highly stressed bearings require special attention and need to be effectively lubricated and stay as cool as possible. Especially for those kind of applications Groeneveld-BEKA manufactures oil circulation systems according to customer specifications.

Oil circulation systems keep the oil free from dirt particles, air and water and can assure the best possible operating temperature that is necessary for the application to prevent wear and corrosion.

• Complete customized system

• Including cooling or heating for optimized operating oil temperature

== Special applications ==
Effective lubrication is key to improve efficiency. Some industries require a different approach, and that's why Groeneveld-BEKA has developed some special lubrication systems to suit those needs.

=== FluiLub ===
The FluiLub rail maintenance systems bring an end to the squealing noise of rails in narrow curves and efficiently reduce the wear of wheels and rails.

The FluiLub system is developed for using thixotropic lubricants with high solid contents, achieving an ideal combination of adhesion and flowability in a spray lubricant for high-stress applications. The system is installed mainly on the leading vehicle axle. Due to the lubricants used, the lubricant is transferred to the following railheads or wheel flanges.

=== BEKA Dry belt system ===
The BEKA Dry belt system offers the advantage of an effective belt lubrication without the use of water and soap and are suitable for the use of common dry belt media like oil with

Teflon or silicones.

Besides the common use as a belt lubrication system for the filling- and packing industry (typically used for surface treatment), the system can also be used as a pure return belt

system.

=== BEKA Grease pump station ===
The BEKA® Grease pump station is a customized automatic lubrication system, completely adapted to the requirements of the machine. The grease pump station can be set-up as a dual-line lubrication system or as an extensive progressive sectional lubrication system.

Because of the customization of the system, a grease pump station can be used as a small oil lubrication system for one or two smaller machines, or even larger machines or plants.

=== BEKA Oil pump station ===
The BEKA® Oil pump station is a customized automatic lubrication system, completely adapted to the requirements of the machine. The oil pump station can be set-up as a dual-line lubrication system or as an extensive progressive sectional lubrication system.

Because of the customization of the system, an oil pump station is commonly used for larger machines or to lubricate all machines in a plant which need oil lubrication.

=== BEKA High pressure water spray system ===
Many problems with circular and pad saws in the wood processing industry can be prevented by spraying a fine water dust onto the saw blade. This water dust ensures a permanent cooling of the tool and effectively avoids adherent tree gum. In addition to this, the unhealthy wood dust is reliably reduced.

The vaporizing of water on a hot saw blade guarantees an effective cooling of the tool. The water as cooling medium removes heat from the working location and hence enables higher speeds and protection of the tool at the same time. The tool life of the saw blades is enlarged, as well as the work precision profits by cooling.

When spraying water with high pressure (up to 100 bar), microdots are produced. Those ensure a reliable wetting of the tools without soaking the machine and the area around. Friction is produced when sawing. When water is used as lubricating medium, friction between the tool and workpiece is reduced and hence also reduces wear, heating and energy

consumption.

== Barrel Pumps ==

=== BEKA PFP-1U ===
The BEKA PFP-1U is a versatile pneumatic barrel pump which offers all features needed to run a machine without unplanned downtime. The PFP-1U can be used in a single-line, dual-line, progressive and sectional lubrication system as well as in a spray lubrication system.

The pump is available for different barrel sizes, ranging from 20 up to 200 kg.

=== BEKA Stream ===
The powerful BEKA Stream pump is designed to provide lubricant up to NLGI-2 to a central lubrication system.

The pumps are perfect as progressive, single-line or dual-line pumps in industrial machines as well as in medium-sized and large construction machines.

With an optional brushless electric or hydraulic drive, the Stream also pumps lubricants, even at extremely cold temperatures.

The use of wear-resistant materials makes the seals uniquely resistant like no other on the market. This pump is not only the perfect partner in the mining sector, where tough and rough operating conditions prevail. Even when operating with lubricants containing solids, the maintenance effort remains low and simple thanks to the user-oriented design.

The Stream can be ordered together with a container or barrel. Here, optional fill level monitors ensure that refilling with lubricant can be perfectly planned.

Automatic lubrication systems

2022-08-16T10:56:09Z

Bhavinrathod: /* Progressive Lubrication */

Home

2022-08-14T17:37:25Z

Bhavinrathod:

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* [[ABB Motors]]
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], [[Link-Belt Bearing|Link-Belt]], Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Home

2022-08-11T18:47:45Z

Bhavinrathod: /* Brands */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, [[Groeneveld-Beka]], Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* [[ABB Motors]]
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], [[Link-Belt Bearing|Link-Belt]], Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

DEF HANDLING EQUIPMENT

2022-08-04T15:25:04Z

Bhavinrathod: /* DEF Digital Turbine Meter */

=== DEF Digital Turbine Meter ===
Digital turbine meter with polyamide construction, designed especially for use with DEF, water etc. Designed for in-line, end of the line application or use with a dispensing nozzle. Polyamide turbine measuring mechanism. Electronic display using two AAA 1.5V batteries. Polyamide body & sealed electronic card makes it suitable for use in severe weather conditions. Display can be rotated in 4 different positions. Measures in litres, quarts, pints & gallons. Easy user re-calibration Includes one additional stainless steel adaptor to convert from 1" male to 1" female threads

WETTED COMPONENTS : Polyamide, Viton, Stainless Steel

RECOMMENDED USE : Urea, Adblue, DEF, Windshield Fluids, Water & Water BasedMedia

DO NOT USE WITH : Fuels & Oils
{| class="wikitable"
!ACCURACY*
|± 1%
|-
!REPEATABILITY*
|± 0.30%
|-
!LEAST COUNT/ RESOLUTION
|0.001 units
|-
!BURST PRESSURE
|580 PSI ( 40 BAR)
|-
!MAX. RESETTABLE BATCH TOTALIZER
|99,999 units
|-
!MAX. NON RESETTABLE BATCH TOTALIZER
|9,99,999 units
|-
!MAX. VISCOSITY OF MEDIA
|5.35 cst
|-
!WATER RESISTANCE
|IP 55
|}
{| class="wikitable"
!CAT NR.
!THREADS
|-
|WM/20/0-1/BSP
|1" BSP
|}

=== Electric DEF / Adblue Transfer Pumps ===
Diaphragm transfer pump designed for dispensing DEF / Adblue. Lightweight non corroding, weather proof polypropylene body. Self priming pump design. Built-In Thermal Overload Protection

Duty Cycle : 30 minutes ON / 30 minutes OFF

Pump inlet & outlet fitted with 3/4" (19 mm) hose barbs

WETTED COMPONENTS : Polypropylene, EPDM, Viton

RECOMMENDED USE : DEF/Adblue, Urea, Water, Antifreeze, Antifreeze, Detergents etc.

DO NOT USE WITH : Diesel, Kerosene, Gasoline, Oils etc.
{| class="wikitable"
!CAT NR.
!DEFP/12
!DEFP/220
|-
!INPUT VOLTAGE
|12V DC
|220V AC, 50/60 Hz.
|-
!MOTOR HP
|1/4 HP
|1/2 HP
|-
!RPM
|2900
|2800
|-
!AMP
|16 Amp
|1.5 Amp
|-
!INLET / OUTLET
|3/4" Hose Barb
|3/4" Hose Barb
|-
!POWER CORD / CABLE
|2m long with alligator clamps
|2m long with Plug
|}

=== DEF / Adblue Transfer Systems ===
DEF - Diesel Exhaust Fluid is a mixture of high purity synthetic automotive grade urea & de-ionised water. It is used in SCR(Selective Catalytic Reduction) system on diesel engines to reduce emissions. Designed to transfer DEF from a Drum / Tote to smaller container/engines etc.

A DEF transfer system consists ofa. DEF Transfer Pump

• 220V AC Diaphragm pump with lightweight non-corroding polypropylene body

b. DEF Digital Meter

• Battery operated digital meter for use with DEF & water based media. Polyamide body & sealed electronic card makes it suitable for use in all sorts of weather conditions

• Measures in Litres, Quarts, Pints & Gallons

c. Inlet Hose

• Special EPDM inlet hose connecting the Drum/Tote opening to the pump inlet respectively

d. Suction Hose

• Special EPDM suction hose

e. Discharge Hose

• 20' special EPDM hose connecting the pump meter outlet to the dispensing nozzle

f. Connecting adaptor

g. Manual DEF Nozzle

• Nylon construction with SS hardware & Viton seals, Manualcontrol, but also includes a continuous flow switch for unattended dispensing

h. Auto Shut Off DEF Nozzle

• Sensor built into the discharge spout automatically shuts off the supply once fluid level in the Drum/Tote reaches that of the outlet discharge spout

i. Nozzle Holder

• For safe storage of the nozzle while the fluid is not being dispensed

j. Mounting Plate

• Stainless Steel mounting plate for use in 1000/1200 litres (275/330gallons) totes & 205 litre (55gallon) drums

• Drum mounting plate is stretchable for varying drum dia and acts as base for installing pump & other accessories

'''Specification'''
{| class="wikitable"
!DESCRIPTION
|DRUM MOUNT
|TOTE MOUNT
|-
!INLET HOSE SIZE
|3/4" I D
|3/4" I D
|-
!DISCHARGE HOSE SIZE
|20' × 3/4" I D
|20' × 3/4” I D
|-
!SUCTION HOSE SIZE
|4' × 3/4" I D
|5' × 3/4" I D
|-
!INPUT VOLTAGE
|220V AC
|220V AC
|-
!MOTOR RATING
|1/2 HP
|1/2 HP
|-
!PROTECTION
|IP55
|IP55
|-
!DUTY CYCLE
|30 mins ON / OFF
|30 mins ON / OFF
|-
!ACCURACY*
|± 1 %
|± 1 %
|-
!REPEATABILITY*
|0.30%
|0.30%
|-
!MAX. WORKING PRESSURE
|145 PSI (10 BAR)
|145 PSI (10 BAR)
|-
!MAX. RESETTABLE BATCH TOTALIZER
|99,999 units
|99,999 units
|-
!MAX. NON RESETTABLE BATCH TOTALIZER
|9,99,999 units
|9,99,999 units
|-
!LEAST COUNT
|0.001 units
|0.001 units
|}

=== DEF / Adblue Control Nozzle Manual ===
For use with DEF, adblue, urea, windshield fluids & other water based media. Nylon construction with stainless steel internal parts & viton seal. Nozzle spout with notches to avoid the gun from slipping from the tank during delivery. Hose barb 3/4" (20 mm) at inlet

Manual control. Also includes continuous flow switch for unattended dispensing. Designed for minimal back pressure & reduction in flow

WETTED COMPONENTS : Nylon (Nylon 6, 30% glass Filled), Stainless Steel, Viton

RECOMMENDED USE : Diesel Exhaust Fluid, Adblue & Urea

=== DEF / Adblue Control Nozzle Automatic ===
For use with DEF, Adblue, Urea, Windshield fluids & Other based media. Heavy duty stainless steel cast body with polyamide cover. Sensor built into the discharge spout automatically shuts off the supply once fluid level in the tank reaches that of the outlet discharge spout. Built-In stainless steel swivel for ease of use

WETTED COMPONENTS : SS 304, N41

RECOMMENDED USE : Water based media, Urea, Adblue, E85 & DEF

AIR LINE ACCESSORIES

2022-08-04T14:25:49Z

Bhavinrathod: /* Filter Regulator Combination */

[[File:2HP Reciprocating Direct Drive Air Compressor.jpg|alt=2HP Reciprocating Direct Drive Air Compressor|thumb|2HP Reciprocating Direct Drive]]

=== 2HP Reciprocating Direct Drive Air Compressor ===
Direct Drive Compressor produce compressed air immediately without needing to fill up the receiver tank. These are designed for extensive use in stapling and nailing applications on packaging stations, cleaning, denting and painting jobs in automotive body shops, tyre inflation applications in fuel stations and for general purpose jobs in small workshops.

Dual Material Construction

Cast Iron Cylinder Block : The cylinder block is made up of cast iron that reduces wear & tear thus imparting longevity to the unit

Aluminium Crankcase & Cylinder Head : Aluminium helps in better heat dissipation thus enhancing performance. Also Aluminium being a light weight material reduces overall weight making the compressor easy to handle.

Compact Design : In-line design of the compressing unit makes it compact

Shock Absorbing Pads : Effectively absorbs vibration and keep the whole unit stable during operation. Strong large wheels for convenient movement of the unit.

Oil Dipstick : with vent hole keeps a check on oil level in the oil sump and releases excess pressure.

Two Pressure Gauges : One for pressure setting in the receiver tank and one for regulating the outlet pressure from the receiver

Pressure Switch with overload protection keeps the compressor safe even in voltage fluctuations.

Plastic Shroud keeps the hot and moving parts safe and prevents any accidents.

Supplied with Polyurethane coiled hose for attaching any equipment such as blow gun, paint spray guns, tyre inflator etc.
[[File:5.5 KW, 7.5 HP.jpg|alt=5.5 KW, 7.5 HP|thumb|5.5 KW, 7.5 HP]]
[[File:4 KW, 5.5 HP .jpg|alt=4 KW, 5.5 HP |thumb|4 KW, 5.5 HP ]]
[[File:2. 2KW, 3HP .jpg|alt=2. 2KW, 3HP |thumb|2. 2KW, 3HP ]]

=== Reciprocating Belt Driven Air Compressors ===
A selection of air compressors designed & manufactured to the highest quality standards using the best raw materials & components. Proven quality, robust design & durable performance makes these the ideal choice for everyday use

Dual Material Construction

World’s only compressor with a unique dual material construction

i) The cylinder block is made up of cast iron that prevents wear & tear, thus imparting longevity to the unit

ii) Crankcase & cylinder head are made from aluminium – Compact design and choice of aluminium as a raw material helps in efficient cooling of the unit. Aluminium crankcase keeps the oil in the sump cooler, thus enhancing the performance of the unit

Efficient Ventilation : Larger flywheel keeps air directed towards the cylinder for faster heat dissipation & efficient ventilation

High pressure cylinder with higher temperature is positioned closer to the flywheel which also helps in faster cooling of the unit

Output tubing designed to pass from the front of the flywheel, further reducing the temperature of the air in the tank

In-Line Design : Compact & superior to “V “type construction : air flow in the in-line design is directed towards both the cylinders uniformly keeping maximum temperature within check as compared to the”V” type construction where air flow is directed towards one side of the “V” at any given time

Motor : Class “F” insulation, motor is designed as per EURO norms

Air Filter : Easy to maintain & replaceable sponge type air filter is easily washable

Built in Starter : Protects the unit from sudden voltage fluctuations & enables usage with varying voltages

Intercooler : Reduces the temperature of compressed air which improves efficiency by reducing power consumption.

Bolted Design Base Plate : Makes it convenient to assemble or disassemble the compressor unit from the tank. Bolted design also eliminates possibility of rust as compared to a welded design

Safety Valves : In-built safety valves for safety against pressure build ups

Oil Sight Glass : For controlling the oil level

Drain Valve : For emptying the condensate collected in the tank

Caged Belt and Pulley Assembly : for enhanced safety in operation

<nowiki>*</nowiki> Only in multiple stage version
{| class="wikitable"
!CAT NR.
!RAC/3-21/150
!RAC/3-21/150-1
!RAC/3-21/200
!RAC/3-21/200-1
!RAC/5. 5-22/200
!RAC/7.5-22/270
|-
!Motor Rating
|2.2 KW, 3 HP
|2.2 KW, 3 HP
|2. 2KW, 3HP
|2. 2KW, 3HP
|4 KW, 5.5 HP
|5.5 KW, 7.5 HP
|-
!Cylinders
|2
|2
|2
|2
|2
|2
|-
!Stages
|1
|1
|1
|1
|2
|2
|-
!Air Receiver Capacity
|150 litres
|150 litres
|200 litres
|200 litres
|200 litres
|270 litres
|-
!Air Displacement
|350 LPM / 12.4 CFM
|350 LPM / 12.4 CFM
|350 LPM / 12.4 CFM
|350 LPM / 12.4 CFM
|550 LPM / 19.5 CFM
|830 LPM / 29 CFM
|-
!Fad (Free Delivery)
|190 LPM / 6.7 CFM
|190 LPM / 6.7 CFM
|190 LPM / 6.7
|CFM 190 LPM / 6.7 CFM
|440 LPM / 15.53 CFM
|620 LPM / 22 CFM
|-
!Max. Pressure
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|-
!Noise Level
|74±3 db (A)
|74±3 db (A)
|74±3 db (A)
|74±3 db (A)
|75±3 db (A)
|76±3 db (A)
|-
!Width
|1360 mm
|1360 mm
|1460 mm
|1460 mm
|1460 mm
|1600 mm
|-
!Depth
|460 mm
|460 mm
|460 mm
|460 mm
|460 mm
|500 mm
|-
!Height
|990 mm
|990 mm
|990 mm
|990 mm
|1000 mm
|1040 mm
|-
!Weight
|115 kg
|115 kg
|140 kg
|140 kg
|158 kg
|192 kg
|-
!Class Of Insulation
|F
|F
|F
|F
|F
|F
|-
!Electric Supply
|400 V, 3 Phase, 50 Hz.
|230 V, Single Phase
|400 V, 3 Phase, 50 Hz.
|400 V, 3 Phase, 50 Hz.
|400 V, 3 Phase, 50 Hz.
|400 V, 3 Phase, 50 Hz.
|}

=== Air Blow Guns ===
Superior quality air blow guns designed for rugged day-in & day out usage. Equipped with a variable speed trigger, guns allow complete control on the volume of air dispensed. Threaded brass insert at the air inlet ensures no damage to threads even after repeated use. Conforms to OSHA STD 1-13.1 for safety

Available in two models:

a. Air Blow Gun – Professional:

• Impact & drop resistant nylon body

• Corrosion resistant stainless steel nozzle & internal parts

• Ergonomic soft rubble grip on handle for convenience in usage.

• Maximum blowing force with minimal air consumption reduces energy cost, thus saving money

b. Air Blow Gun – Standard:

• Gun body made from Poly Acetal (POM)

• Non – corroding 4-1/2" (114mm) long nozzle to access hard to reach areas
{| class="wikitable"
!CAT NR.
!TIP
!NOISE (db)
!BLOWING FORCE AT 100 PSI (Kg)
!AIR CONSUMPTION AT 100 PSI (cfm)
|-
| colspan="5" |AIR BLOW GUN - PROFESSIONAL
|-
!ABG/1/1-4F/BSP
|Plastic
|77
|0.26
|9.53
|-
!ABG/3/1-4F/BSP
|4-1/2" SS nozzle
|80
|0.35
|15.18
|-
| colspan="5" |AIR BLOW GUN - STANDARD
|-
!ABG/30/1-4F/BSP
|4-1/2" nozzle
|80
|0.47
|19.06
|}

=== Polyurethane Coil Hose ===
Polyurethane Coil / Spiral Air Hoses offer highest flexibility with least resistance to pull recoils. These have excellent memory & automatically recoil. Hoses are kink resistant & lightweight (approx. 25% lighter than rubber). As opposed to nylon hoses, PU hoses offer much better elasticity. Constructed with one end coiled & other end with 19" (483 mm) straight length. Both ends are fitted with polyacetal bend restrictors & crimped with solid brass swivel fittings on both sides offering highest directional flexibility Ideal for use on assembly lines with air tools, automotive repair & body shops etc. Solid brass swivel fittings on both ends offer complete 360° directional flexibility.
{| class="wikitable"
! rowspan="2" |CAT NR.
! rowspan="2" |THREADS
! colspan="2" |HOSE INNER DIA.
! colspan="2" |HOSE OUTER DIA.
!OVERALL LENGTH
|-
!(MM)
!(INCH)
!(MM)
!(INCH)
!(M)
|-
|PUH/5BO/15/1-4/BSP
|1/4" BSP
|5
|3/16
|8
|5/16
|4.5
|-
|PUH/5BO/20/1-4/BSP
|1/4" BSP
|5
|3/16
|8
|5/16
|6
|-
|PUH/5BO/25/1-4/BSP
|1/4" BSP
|5
|3/16
|8
|5/16
|7. 5
|-
|PUH/6BO/15/1-4/BSP
|1/4" BSP
|6.5
|1/4
|10
|3/8
|4.5
|-
|PUH/6BO/20/1-4/BSP
|1/4" BSP
|6.5
|1/4
|10
|3/8
|6
|-
|PUH/6BO/25/1-4/BSP
|1/4" BSP
|6.5
|1/4
|10
|3/8
|7. 5
|-
|PUH/10BO/15/3-8/BSP
|3/8" BSP
|9.5
|3/8
|12.7
|1/2
|4.5
|-
|PUH/10BO/20/3-8/BSP
|3/8" BSP
|9.5
|3/8
|12.7
|1/2
|6
|-
|PUH/10BO/25/3-8/BSP
|3/8" BSP
|9.5
|3/8
|12.7
|1/2
|7. 5
|}

=== Filter Regulator Combination ===
Compact combination unit for removing contaminants & moisture from compressed air in addition to regulating air pressure. Regulator has a non raising “Press to Lock” adjusting knob for locking at any set pressure. Filter is designed with a separator & shield for efficient moisture separation. Supplied complete with pressure gauge & wall mounting bracket.
{| class="wikitable"
!CAT NR.
!DESCRIPTION
!INLET/ OUTLET PORT SIZE
!PRESSURE GAUGE PORT SIZE
!MAX. FLOW RATE
|-
|FRC136134-S/GB
|Miniature
|1/4" BSP
|1/8" BSP
|550 LPM (20 CFM)
|-
|FRC156334-S/GB
|Standard
|1/2" BSP
|1/8" BSP
|3,000 LPM ( 106 CFM)
|}

=== Filter Regulator & Lubricator – 2 Pc ===
Space saving 2 pc modular filter-regulator combination & lubricator. Filter removes contaminants & moisture from compressed air. Regulator has a non raising “Press to Lock” adjusting knob for locking at any set pressure. Lubricator feeds lubricants to air operated equipment maintaining a constant oil to-air density over a wide range of flow. Supplied complete with pressure gauge & wall mounting bracket
{| class="wikitable"
!CAT NR.
!DESCRIPTION
!INLET/ OUTLET PORT SIZE
!PRESSURE GAUGE PORT SIZE
!MAX. FLOW RATE
|-
|FRC136134-S/WG
|Miniature
|1/4" BSP
|1/8" BSP
|550 LPM (20 CFM)
|-
|FRC156334-S/WG
|Standard
|1/2" BSP
|1/8" BSP
|3,000 LPM ( 106 CFM)
|}

=== Digital Pressure Gauges ===
Used with air regulators for setting air output pressure. Digital read out displays air pressure in a choice of 4 units: PSI, BAR, MPa & kg/cm2. Digital gauges offer higher accuracy and can also withstand vibrations due to pressure variations. Square body has die cast aluminum centre back. Single button operated with auto turn off after 120 seconds that extends battery life.
{| class="wikitable"
!Accuracy
|± 2% of Full Scale
|-
!Measuring Range
|− 15 to 145 PSI
|-
!Least Count
|0.1 PSI (0.01 BAR)
|-
!Working Temperature
|− 10°C to +60°C
|-
!Working Humidity
|35 ~ 85% RH
|-
!Battery
|CR 2032 lithium (included)
|-
!Battery Life (approx.)
|1 year (usage 5 times a day)
|}
{| class="wikitable"
!CAT. NR.
|THREADS
|-
!DPG/L/1-8/B
|1/8" BSPT(M)
|-
!DPG/L/1-4/B
|1/4" BSPT (M)
|}

=== Tyre Inflator Gauge 'V' Series ===
GROZ 3-in-1 Tyre Inflator.

Gauges are designed to:

1. Measure tyre pressure

2. Inflate tyres

3. Deflate tyres
{| class="wikitable"
!GAUGE TYPE
|Analog
|-
!GAUGE DIAMETER
|2-1/2" (63 mm)
|-
!AVAILABLE UNIT SELECTION
|PSI, BAR
|-
!OPERATING PRESSURE
|Upto 60 PSI (4 BAR)ACCURACY ± 4%
|-
!RESOLUTION
|2 PSI (0.10 BAR)
|-
!INLET
|1/4" (NPT Thread)
|}
Press deflation valve to reduce tyre pressure. Analog gauge comes with a protective shroud Aluminium die cast gun with 17" (440 mm) flexible hose & straight chuck suitable for cars & other light vehicles.
{| class="wikitable"
!CAT NR
|TIG/2.5/N
|}

=== Tyre Inflator Gauge ===
Reliable and sturdy, the 3 in 1 GROZ tyre gauge is designed to:

1. Measure Tyre Pressure

2. Inflate Tyres

3. Deflate Tyres

Tyre deflation is via the deflation valve on the gun body. A simple press of the valve will activate it and reduce pressure.

Available with choice of

a. Analog Gauge

b. Digital Gauge

Aluminium die cast gun with flexible hose & straight chuck suitable for cars & other light vehicles

==== for Cars ====
{| class="wikitable"
!Gauge Type
!Digital
!Analog
|-
!CAT NR
!TIG/D/12/BSP
!TIG/M/12/BSP
|-
!Gauge Diameter
|2-1/2" (63 mm)
|2-1/2" (63 mm)
|-
!Backlight
|Yes
| -
|-
!Available Unit Selection
|PSI, BAR, Mpa, Kg/cm2
|PSI, BAR
|-
!Max. Pressure
|Upto 300 PSI (21 BAR)
|upto 50 PSI (3.5 BAR)
|-
!Accuracy
|± 1% of Full scale
|± 1.6% of Full scale
|-
!Resolution
|0.1 PSI
|5 PSI
|-
!Power Supply
|Lithium Battery
| -
|}

==== for Trucks ====
{| class="wikitable"
!Gauge Type
!Digital
!Analog
|-
!CAT NR
!TIG/D/24D/BSP
!TIG/M/24D/BSP
|-
!Gauge Diameter
|2-1/2" (63 mm)
|2-1/2" (63 mm)
|-
!Backlight
|YES
| -
|-
!Available Unit Selection
|AR PSI, BAR, Mpa,Kg/cm2
|PSI, BAR
|-
!Max. Pressure
|upto 300 PSI (21 BAR)
|upto 50 PSI (3.5 BAR)
|-
!Accuracy
|± 1% of Full scale
|± 1.6% of Full scale
|-
!Resolution
|0.1 PSI
|5 PSI
|-
!Power Supply
|Lithium Battery
| -
|}

AIR LINE ACCESSORIES

2022-08-04T05:14:47Z

Bhavinrathod: /* 2HP Reciprocating Direct Drive Air Compressor */

[[File:2HP Reciprocating Direct Drive Air Compressor.jpg|alt=2HP Reciprocating Direct Drive Air Compressor|thumb|2HP Reciprocating Direct Drive]]

=== 2HP Reciprocating Direct Drive Air Compressor ===
Direct Drive Compressor produce compressed air immediately without needing to fill up the receiver tank. These are designed for extensive use in stapling and nailing applications on packaging stations, cleaning, denting and painting jobs in automotive body shops, tyre inflation applications in fuel stations and for general purpose jobs in small workshops.

Dual Material Construction

Cast Iron Cylinder Block : The cylinder block is made up of cast iron that reduces wear & tear thus imparting longevity to the unit

Aluminium Crankcase & Cylinder Head : Aluminium helps in better heat dissipation thus enhancing performance. Also Aluminium being a light weight material reduces overall weight making the compressor easy to handle.

Compact Design : In-line design of the compressing unit makes it compact

Shock Absorbing Pads : Effectively absorbs vibration and keep the whole unit stable during operation. Strong large wheels for convenient movement of the unit.

Oil Dipstick : with vent hole keeps a check on oil level in the oil sump and releases excess pressure.

Two Pressure Gauges : One for pressure setting in the receiver tank and one for regulating the outlet pressure from the receiver

Pressure Switch with overload protection keeps the compressor safe even in voltage fluctuations.

Plastic Shroud keeps the hot and moving parts safe and prevents any accidents.

Supplied with Polyurethane coiled hose for attaching any equipment such as blow gun, paint spray guns, tyre inflator etc.
[[File:5.5 KW, 7.5 HP.jpg|alt=5.5 KW, 7.5 HP|thumb|5.5 KW, 7.5 HP]]
[[File:4 KW, 5.5 HP .jpg|alt=4 KW, 5.5 HP |thumb|4 KW, 5.5 HP ]]
[[File:2. 2KW, 3HP .jpg|alt=2. 2KW, 3HP |thumb|2. 2KW, 3HP ]]

=== Reciprocating Belt Driven Air Compressors ===
A selection of air compressors designed & manufactured to the highest quality standards using the best raw materials & components. Proven quality, robust design & durable performance makes these the ideal choice for everyday use

Dual Material Construction

World’s only compressor with a unique dual material construction

i) The cylinder block is made up of cast iron that prevents wear & tear, thus imparting longevity to the unit

ii) Crankcase & cylinder head are made from aluminium – Compact design and choice of aluminium as a raw material helps in efficient cooling of the unit. Aluminium crankcase keeps the oil in the sump cooler, thus enhancing the performance of the unit

Efficient Ventilation : Larger flywheel keeps air directed towards the cylinder for faster heat dissipation & efficient ventilation

High pressure cylinder with higher temperature is positioned closer to the flywheel which also helps in faster cooling of the unit

Output tubing designed to pass from the front of the flywheel, further reducing the temperature of the air in the tank

In-Line Design : Compact & superior to “V “type construction : air flow in the in-line design is directed towards both the cylinders uniformly keeping maximum temperature within check as compared to the”V” type construction where air flow is directed towards one side of the “V” at any given time

Motor : Class “F” insulation, motor is designed as per EURO norms

Air Filter : Easy to maintain & replaceable sponge type air filter is easily washable

Built in Starter : Protects the unit from sudden voltage fluctuations & enables usage with varying voltages

Intercooler : Reduces the temperature of compressed air which improves efficiency by reducing power consumption.

Bolted Design Base Plate : Makes it convenient to assemble or disassemble the compressor unit from the tank. Bolted design also eliminates possibility of rust as compared to a welded design

Safety Valves : In-built safety valves for safety against pressure build ups

Oil Sight Glass : For controlling the oil level

Drain Valve : For emptying the condensate collected in the tank

Caged Belt and Pulley Assembly : for enhanced safety in operation

<nowiki>*</nowiki> Only in multiple stage version
{| class="wikitable"
!CAT NR.
!RAC/3-21/150
!RAC/3-21/150-1
!RAC/3-21/200
!RAC/3-21/200-1
!RAC/5. 5-22/200
!RAC/7.5-22/270
|-
!Motor Rating
|2.2 KW, 3 HP
|2.2 KW, 3 HP
|2. 2KW, 3HP
|2. 2KW, 3HP
|4 KW, 5.5 HP
|5.5 KW, 7.5 HP
|-
!Cylinders
|2
|2
|2
|2
|2
|2
|-
!Stages
|1
|1
|1
|1
|2
|2
|-
!Air Receiver Capacity
|150 litres
|150 litres
|200 litres
|200 litres
|200 litres
|270 litres
|-
!Air Displacement
|350 LPM / 12.4 CFM
|350 LPM / 12.4 CFM
|350 LPM / 12.4 CFM
|350 LPM / 12.4 CFM
|550 LPM / 19.5 CFM
|830 LPM / 29 CFM
|-
!Fad (Free Delivery)
|190 LPM / 6.7 CFM
|190 LPM / 6.7 CFM
|190 LPM / 6.7
|CFM 190 LPM / 6.7 CFM
|440 LPM / 15.53 CFM
|620 LPM / 22 CFM
|-
!Max. Pressure
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|175 PSI / 12 BAR
|-
!Noise Level
|74±3 db (A)
|74±3 db (A)
|74±3 db (A)
|74±3 db (A)
|75±3 db (A)
|76±3 db (A)
|-
!Width
|1360 mm
|1360 mm
|1460 mm
|1460 mm
|1460 mm
|1600 mm
|-
!Depth
|460 mm
|460 mm
|460 mm
|460 mm
|460 mm
|500 mm
|-
!Height
|990 mm
|990 mm
|990 mm
|990 mm
|1000 mm
|1040 mm
|-
!Weight
|115 kg
|115 kg
|140 kg
|140 kg
|158 kg
|192 kg
|-
!Class Of Insulation
|F
|F
|F
|F
|F
|F
|-
!Electric Supply
|400 V, 3 Phase, 50 Hz.
|230 V, Single Phase
|400 V, 3 Phase, 50 Hz.
|400 V, 3 Phase, 50 Hz.
|400 V, 3 Phase, 50 Hz.
|400 V, 3 Phase, 50 Hz.
|}

=== Air Blow Guns ===
Superior quality air blow guns designed for rugged day-in & day out usage. Equipped with a variable speed trigger, guns allow complete control on the volume of air dispensed. Threaded brass insert at the air inlet ensures no damage to threads even after repeated use. Conforms to OSHA STD 1-13.1 for safety

Available in two models:

a. Air Blow Gun – Professional:

• Impact & drop resistant nylon body

• Corrosion resistant stainless steel nozzle & internal parts

• Ergonomic soft rubble grip on handle for convenience in usage.

• Maximum blowing force with minimal air consumption reduces energy cost, thus saving money

b. Air Blow Gun – Standard:

• Gun body made from Poly Acetal (POM)

• Non – corroding 4-1/2" (114mm) long nozzle to access hard to reach areas
{| class="wikitable"
!CAT NR.
!TIP
!NOISE (db)
!BLOWING FORCE AT 100 PSI (Kg)
!AIR CONSUMPTION AT 100 PSI (cfm)
|-
| colspan="5" |AIR BLOW GUN - PROFESSIONAL
|-
!ABG/1/1-4F/BSP
|Plastic
|77
|0.26
|9.53
|-
!ABG/3/1-4F/BSP
|4-1/2" SS nozzle
|80
|0.35
|15.18
|-
| colspan="5" |AIR BLOW GUN - STANDARD
|-
!ABG/30/1-4F/BSP
|4-1/2" nozzle
|80
|0.47
|19.06
|}

=== Polyurethane Coil Hose ===
Polyurethane Coil / Spiral Air Hoses offer highest flexibility with least resistance to pull recoils. These have excellent memory & automatically recoil. Hoses are kink resistant & lightweight (approx. 25% lighter than rubber). As opposed to nylon hoses, PU hoses offer much better elasticity. Constructed with one end coiled & other end with 19" (483 mm) straight length. Both ends are fitted with polyacetal bend restrictors & crimped with solid brass swivel fittings on both sides offering highest directional flexibility Ideal for use on assembly lines with air tools, automotive repair & body shops etc. Solid brass swivel fittings on both ends offer complete 360° directional flexibility.
{| class="wikitable"
! rowspan="2" |CAT NR.
! rowspan="2" |THREADS
! colspan="2" |HOSE INNER DIA.
! colspan="2" |HOSE OUTER DIA.
!OVERALL LENGTH
|-
!(MM)
!(INCH)
!(MM)
!(INCH)
!(M)
|-
|PUH/5BO/15/1-4/BSP
|1/4" BSP
|5
|3/16
|8
|5/16
|4.5
|-
|PUH/5BO/20/1-4/BSP
|1/4" BSP
|5
|3/16
|8
|5/16
|6
|-
|PUH/5BO/25/1-4/BSP
|1/4" BSP
|5
|3/16
|8
|5/16
|7. 5
|-
|PUH/6BO/15/1-4/BSP
|1/4" BSP
|6.5
|1/4
|10
|3/8
|4.5
|-
|PUH/6BO/20/1-4/BSP
|1/4" BSP
|6.5
|1/4
|10
|3/8
|6
|-
|PUH/6BO/25/1-4/BSP
|1/4" BSP
|6.5
|1/4
|10
|3/8
|7. 5
|-
|PUH/10BO/15/3-8/BSP
|3/8" BSP
|9.5
|3/8
|12.7
|1/2
|4.5
|-
|PUH/10BO/20/3-8/BSP
|3/8" BSP
|9.5
|3/8
|12.7
|1/2
|6
|-
|PUH/10BO/25/3-8/BSP
|3/8" BSP
|9.5
|3/8
|12.7
|1/2
|7. 5
|}

=== Filter Regulator Combination ===
Compact combination unit for removing contaminants & moisture from compressed air in addition to regulating air pressure. Regulator has a non raising “Press to Lock” adjusting knob for locking at any set pressure. Filter is designed with a separator & shield for efficient moisture separation. Supplied complete with pressure gauge & wall mounting bracket.

=== Filter Regulator & Lubricator – 2 Pc ===
Space saving 2 pc modular filter-regulator combination & lubricator. Filter removes contaminants & moisture from compressed air. Regulator has a non raising “Press to Lock” adjusting knob for locking at any set pressure. Lubricator feeds lubricants to air operated equipment maintaining a constant oil to-air density over a wide range of flow. Supplied complete with pressure gauge & wall mounting bracket

=== Digital Pressure Gauges ===
Used with air regulators for setting air output pressure. Digital read out displays air pressure in a choice of 4 units: PSI, BAR, MPa & kg/cm2. Digital gauges offer higher accuracy and can also withstand vibrations due to pressure variations. Square body has die cast aluminum centre back. Single button operated with auto turn off after 120 seconds that extends battery life.

=== Tyre Inflator Gauge 'V' Series ===
GROZ 3-in-1 Tyre Inflator.

Gauges are designed to:

1. Measure tyre pressure

2. Inflate tyres

3. Deflate tyres

Press deflation valve to reduce tyre pressure. Analog gauge comes with a protective shroud Aluminium die cast gun with 17" (440 mm) flexible hose & straight chuck suitable for cars & other light vehicles.

=== Tyre Inflator Gauge ===
Reliable and sturdy, the 3 in 1 GROZ tyre gauge is designed to:

1. Measure Tyre Pressure

2. Inflate Tyres

3. Deflate Tyres

Tyre deflation is via the deflation valve on the gun body. A simple press of the valve will activate it and reduce pressure.

Available with choice of

a. Analog Gauge

b. Digital Gauge

Aluminium die cast gun with flexible hose & straight chuck suitable for cars & other light vehicles

==== for Cars ====
{| class="wikitable"
!Gauge Type
!Digital
!Analog
|-
!Gauge Diameter
|2-1/2" (63 mm)
|2-1/2" (63 mm)
|-
!Backlight
|Yes
| -
|-
!Available Unit Selection
|PSI, BAR, Mpa, Kg/cm2
|PSI, BAR
|-
!Max. Pressure
|Upto 300 PSI (21 BAR)
|upto 50 PSI (3.5 BAR)
|-
!Accuracy
|± 1% of Full scale
|± 1.6% of Full scale
|-
!Resolution
|0.1 PSI
|5 PSI
|-
!Power Supply
|Lithium Battery
| -
|}

==== for Trucks ====
{| class="wikitable"
!Gauge Type
!Digital
!Analog
|-
!Gauge Diameter
|2-1/2" (63 mm)
|2-1/2" (63 mm)
|-
!Backlight
|YES
| -
|-
!Available Unit Selection
|AR PSI, BAR, Mpa,Kg/cm2
|PSI, BAR
|-
!Max. Pressure
|upto 300 PSI (21 BAR)
|upto 50 PSI (3.5 BAR)
|-
!Accuracy
|± 1% of Full scale
|± 1.6% of Full scale
|-
!Resolution
|0.1 PSI
|5 PSI
|-
!Power Supply
|Lithium Battery
| -
|}

DRUM HANDLING EQUIPMENT

2022-08-04T05:08:37Z

Bhavinrathod:

=== Drum Dolly ===
Extra heavy duty drum dolly for convenient movement of 180 kg/210 litre drums in shop floors & rough workshop environment. Manufactured from solid 3 mm (11 guage) steel sheet. Design incorporates wide steel cross bases for full base support. Premium powder coated finish. Firmly welded solid cast iron 4 wheels (75 mm dia. × 35 mm wide)

Holds drums of dia. 23" (584 mm)

Overall Height 6-1/2" (165 mm)

Loading Capacity 545 kg (max)
{| class="wikitable"
!CAT NR.
|BDL/140S
|}

=== Low Profile Drum Trolley ===
Low Profile Drum Trolley, Drum platform only 1/2" (12 mm) off the floor, facilitating easy loading & unloading. Extra heavy duty construction, from 5 mm (6 gauge) steel sheet, with a loading capacity of 545 kgs (1200 lbs). Fully powder coated finish. Removable pivoting handle includes drum tipper for easy loading 2 large Phenolic front wheels 5-3/4" dia. (146 mm) × 1-7/8" (47 mm) wide & one back phenolic swivel wheel 3" (75 mm) dia. × 1-3/8" (35 mm) wide. Trolley can accommodate drums up to a dia. of 26" (660 mm). Unit comes flat packed in semi-knocked down condition for ease of transport.
{| class="wikitable"
!CAT NR.
|TRL/55
|205 litre (55 gal.) drums
|}

=== Drum Wrench ===
An easy & convenient tool to open almost all types of drums. Manufactured from cast aluminum (LM25), hardened & tempered for increased Strength. Ends of the wrench are designed to fit perfectly onto most 2" & 3/4" drum plugs. Compact design for easy Storage.
{| class="wikitable"
!CAT NR.
|DRW/AL- 01
|}

=== Drum Trolleys ===
Rugged build with outstanding features make this trolley ideal for use in workshops & industrial floors for transfer of large 210 litre drums & buckets. Manufactured from heavy gauge 4 mm thick steel sheet for increased strength & durability 3" (75 mm) ground clearance for smooth movement over uneven surfaces in workshop environment 6" (150 mm) wide polyurethane front wheels with nylon rim for reduced wear & tear. Heavy duty rear castors with toe locks for higher safety & stability . Trolley for 50-210 litre drums. Can be used just as a trolley for safe movement of oil drums or a complete dispensing system with hose reel & pneumatic pump.
{| class="wikitable"
!CAT NR.
!SUITABLE FOR
|-
|TRL/50
|50-60 kg drums /16 gal. / 120 lb
|-
|TRL/180D
|180 Kg / 205 litre drums / Trolley comes complete with safety chain for secure holding of drum
|}

SPECIALITY PUMPS

2022-08-04T04:56:12Z

Bhavinrathod: /* Siphon Pumps */

=== Nylon Chemical Pump ( CMP/12 ) ===
Self priming Vertical Lift pump. Nylon construction with stainless steel plunger rod & PTFE seals. Complete with 2” polypropylene bung adaptor. Suitable for use on 210 litre drums

WETTED COMPONENTS : Nylon, Polypropylene, Stainless Steel & PTFE

RECOMMENDED USE : Lacquer, Thinners, Detergents, Glycerine, Water, Weed Killer, Brake Kleen, Mild Acids & Petroleum Based Media

DO NOT USE WITH : Strong Acids, Bleach & Petrol

=== Plastic Rotary Pump ( PRP/01 ) ===
Special application pump designed to be used with a wide variety of media that cannot be pumped using a regular cast iron or steel pump. Body made from glass filled polypropylene with ryton vanes. Viton rubber seal & stainless steel hardware. Complete with 3 pc threaded suction tube suitable for use on 50-210 litre drums.

WETTED COMPONENTS : Polypropylene, Ryton, Viton & Stainless Steel

RECOMMENDED USE : Water based media, acids, chemicals, detergents, benzene, glycerine etc.

DO NOT USE WITH : Acetone, Lacquer, Mineral Oils, Solvents, Turpentine etc.

=== Plastic Lever Pump ( PLP/02 ) ===
Lever action barrel pump designed for use with high viscosity oils, thick fluids, agricultural chemicals etc. Easy & comfortable operation. Built in 2" bung adaptor allows pump to be fixed directly on drums with 2" opening. Pump position can be adjusted using the lock nut incorporated in the pump body. Air vent cap fitted in the outlet helps break siphon action. Complete with suction tube for use on 50 – 210 litre drums & 3/4"× 2m flexible corrugated hose

WETTED COMPONENTS : Polyacetal, Polypropylene, Polyethylene, PVC & Viton

RECOMMENDED USE : Water-based media, Detergents, Soaps, Antifreeze, Windshield washer, Hydraulic oils, Lubricants, Herbicides & Pesticides, Adblue, Urea, DEF etc. Pump should only be used with Non-flammable liquids

DO NOT USE WITH : Any media that is not compatible with the materials used in the pump construction. These pumps must never be used for fuel transfer or with thinners, solvents, hydraulic oils etc.

=== Siphon Pumps ===
Easy to use, polyethylene pumps siphon liquids to lower levels than the height at which the pump is installed. These are easy to prime & start within 6-7 strokes. Pump requires no further operation & keeps working in auto position. All pumps are equipped with a vent cap on top. Opening the cap stops discharge To dispense media at levels higher than the pump, pump below needs to be continuously operated Supplied complete with flexible corrugated discharge tube.

RECOMMENDED USE : Water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids, and other liquids compatible with pump construction materials. Pump should only be used with light weight & nonflammable liquids

DO NOT USE WITH : Any media not compatible with materials used in the pump construction Pumps must never be used with hot media at temperatures above 60°C (140°F). These pumps must never be used with concentrated acids, Acetone, Benzene etc.
{| class="wikitable"
!CAT NR.
!FLOW RATE
!BUNG
!FITS
!DISCHARGE HOSE LENGTH
|-
!SPH/1
|6.5 LPM
|1-1/2" for use with pails
|5-20 litre / 5 gal. pails
|551 mm
|-
!SPH/2
|17.5 LPM
|2" for use with drums
|205 litre / 55 gal. drums
|1180 mm
|-
!SPH/3
|21 LPM
|2" for use with drums
|205 litre / 55 gal. drums
|1212 mm
|}

SPECIALITY PUMPS

2022-08-04T04:14:18Z

Bhavinrathod:

GREASING EQUIPMENT

2022-08-03T07:03:56Z

Bhavinrathod: /* Air Operated Grease Ratio Pumps 50:1 */

== Grease Gun ==

=== All Grease Gun Comparision ===
{| class="wikitable"
!CAT NR.
!DETAILS
!DELIVERS
!DEVELOPS
!CAPACITY
|-
!K45R/B
|150 mm rigid steel extension & 3 jaw coupler
|UPTO 1.5 GM / STROKE
| colspan="2" |UPTO 10,000 PSI (690 BAR)
|-
!G1R/HD/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 10,000 PSI (690 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/CP/B
|Zinc Plated,150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/BL/B
|Powder Coated, 150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G2R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 2.4 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G1R/B/T/EC/BL
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G5R/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.50 GM / STROKE
|UPTO 5,000 PSI (345 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G14R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 0.55 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|120 CC BULK / 85 GMS CARTRIDGE
|-
!G-16/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.40 GM / STROKE
|UPTO 3,500 PSI (240 BAR)
|120 GMS BULK / 85 GMS CARTRIDGE
|}

=== The Ultimate Lever Grease Gun - K45R/B ===
High capacity - high output lever grease gun Large 650gm capacity barrel for less frequent refilling

Reduce greasing time to one-half : 30% larger dia pistons pushes out 50% more grease /stroke than regular guns Aluminum die cast head fitted with bulk loader valve Heavy gauge drop resistant steel barrel in premium metallic powder coated finish.

Variable Stroke : Convenient greasing in tight spaces with limited movement of handle. High compression spring for removing air pockets from grease. Fully serviceable with no riveted parts. Works with NLGI 1, 2 & 3 greases

=== Lever Grease Gun Heavy Duty - G1R/HD/B ===
Designed for heavy industrial applications. Solid aluminium grease gun head fitted with air bleeder & bulk loader valves 1.2 mm thick steel barrel with heavy duty follower spring, CNC machined head & rolled threads for fast & easy reloading

Unique Lock Lever Mechanism : Allows user to easily lock plunger rod in any position.

Variable Stroke ''':''' Convenient greasing in tight spaces with limited movement of handle Resists back pressure, especially useful in chain tightening of earth moving equipment.

=== Lever Grease Guns Heavy Duty - V Series - V1R/HD/CP/B & V1R/HD/BL/B ===
Professional model – ideal for lubrication in automotive workshops, agricultural & light industrial application. Aluminium die cast grease gun head with built-in air bleeder valve Robust steel barrel with knurling for firm grip. Heavy duty handle with ergonomic non slip soft rubber grip

Available in 2 Finishes :

a. Zinc plated

b. Black Powder Coated

=== Lever Grease Gun Dual Piston - G2R/B ===
The high output greasing solution! For greasing applications requiring voluminous and frequent greasing, especially on agricultureal & construction machinery

Reduce Greasing Time To One-Third : Dual piston mechanism results in triple output per stroke reducing greasing time to one-third.

No Loss of Prime : Dual inlet of grease ensures that gun does not lose prime

=== Lever Grease Guns - V Series - V1R/B ===
21st century design – ideal combination of superior quality & value price. Suitable for use in general lubrication & daily maintenance work. Aluminium die cast grease gun head with built-in air release valve. Soft rubber grip on lever handle for comfortable operation. Durable powder coated Finish

=== Lever Grease Gun - Super Value - G1R/B/T/EC/BL ===
Most popular value priced grease gun - for general purpose lubrication across all sorts of applications Drop resistant steel head with a bulk loader valve. Soft rubber grip on lever handle for comfortable use Durable powder coated Finish

=== Pistol Grip Grease Gun - G5R/B ===
Most popular one hand grease gun designed for use in confined spaces or where access to grease nipples is restricted. 1.2 mm thick steel barrel with heavy duty follower spring. Rolled threads for fast & easy reloading. Aluminium die cast CNC machined head with steel block nut Pistol handle designed to prevent fingers from pinching

=== Mini Lever Grease Gun - G14R/B ===
When you need a tough little grease gun for hard to reach places, this is it! Compact tool box size grease gun. Aluminium die cast head.

=== Mini Pistol Grease Gun - Deluxe - G-16/B ===
One hand pistol grip grease gun with convenient pull type operating mechanism. Aluminum cast head with front & top discharge ports. Durable powder coated Finish. Ideal for greasing in tight spaces such as CNC machines.

== Air Operated Grease Gun ==
High power, continuous flow air operated grease gun.

Continuous discharge of grease with the trigger pressed.

For use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to vehicle air brake compressors.
{| class="wikitable"
!AIR OPERATING RANGE
|40-120 PSI (3-8 BAR)
|-
!PRESSURE RATIO
|40:01:00
|-
!AIR COMPRESSOR VOLUME
|1 CFM / 0.026 CBM @ 6 BAR
|-
!AIR INLET THREADING
|1/4" (F)
|}
{| class="wikitable"
!CAT NR.
!DETAILS
|-
|AGG/1R/B
|150 mm rigid steel extension & 4 jaw coupler
|}

== Battery Powered Grease Gun ==
Powerful 19.2V high torque Motor.

Standard 1.5Ah Ni-Cd battery pack with an additional battery pack for uninterrupted greasing.

Automatic air release valve & bulk loader.

Each battery charge provides power to dispense upto 2.4 kg grease in free flow condition.

Complete with 30" high pressure hose with spring guard on both ends (prevents hose from kinking), 4 jaw coupler & 400 gm grease cartridge.

Packed in a blow moulded case for safe storage & ease of transportation.

Designed for use by mechanics, technicians, maintenance staff, farmers etc. for everyday greasing & preventive maintenance jobs.
{| class="wikitable"
!CAT NR.
!DETAILS
|-
! colspan="2" |GREASE GUN ASSEMBLY
|-
|BPGG/19/EU-CTG/01P
|Cordless grease gun with 220V/50Hz Battery Charger, 2 pin plug & 400 gm grease cartridge
|-
! colspan="2" |SPARE PARTS & ACCESSORIES
|-
|RB/BPGG/19N
|Rechargeable Battery, 19.2V, 1.5 Ah, Ni-Cd
|-
|BC/BPGG/19N/EU
|1 hour CE energy saving battery charger, 220V/50Hz., 19.2V, 2 pin plug
|-
|SS/BPGG/19N
|Carrying / Shoulder strap
|-
|CTG/01P
|400 gms grease cartridge
|-
|BMC/BPGG/19N
|Carrying case / Blow moulded case
|}

== Grease Accesories ==

=== Hydraulic Couplers ===

==== - Standard ====
Most popular couplers for use with grease guns for general maintenance. Narrow coupler design for use on fittings with limited access. Milled slot for easy tightening. Fully hardened spring steel jaws. Recommended for use with hand operated grease guns.

==== - Professional ====
Best selling coupler for professional use. Hardened coupler body withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy tightening Recommended for use with hand operated grease guns.

==== - Heavy Duty ====
Heavy duty couplers recommended for use with air operated grease guns. Hardened coupler body with double wall thickness withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy Tightening.
{| class="wikitable"
!
!CAT NR.
!THREADS
!JAWS
!PRESSURE
|-
! rowspan="2" |Standard
|HC/11/4/B
|1/8" BSPT
|4
| rowspan="2" |UPTO 3,000 PSI
(207 BAR)
|-
|HC/11/4/BSP
|1/8" BSP
|4
|-
! rowspan="2" |Professional
|HC/14/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 6,000 PSI
(413 BAR)
|-
|HC/14/4/B
|1/8" BSPT
|4
|-
! rowspan="2" |Heavy Duty
|HC/12/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 10,000 PSI
(690 BAR)
|-
|HC/12/4/B
|1/8" BSPT
|4
|}

=== Push-on Grease Couplers ===
Push-on grease couplers for use with button head grease fittings, found mainly on heavy machinery, agricultural & contractor’s equipment etc. Zinc die cast construction Metal seal imparts increased resistance to wear. Couplers conveniently slide over the face of the button head fittings. Threaded 1/8" BSPT (F)
{| class="wikitable"
!CAT NR.
! colspan="2" |Pressure
|-
|PCN/1/B
|3000 PSI
|207 BAR
|-
|PCN/3/B
|6000 PSI
|413 BAR
|-
|PCN/2/B
|7500 PSI
|517 BAR
|}
[[File:Grease Gun Hose.jpg|alt=Grease Gun Hose|thumb|339x339px|Grease Gun Hose]]

=== Grease Gun Hoses ===
Grease hoses facilitate greasing of fittings in areas with limited access .

Thermoplastic construction, fully flexible with outer diameter (O.D.) 8.5 mm.

Zinc plated steel end connections with hydraulic crimping.

Threaded 1/8" BSPT (M) on both ends.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
|-
|GHC-12/B
|300 mm
|12 in
|-
|GHC-18/B
|450 mm
|18 in
|-
|GHC-20/B
|500 mm
|20 in
|}
[[File:Grease Gun Steel Extensions.jpg|alt=Grease Gun Steel Extensions|thumb|245x245px|Grease Gun Steel Extensions]]

=== Grease Gun Steel Extensions ===
Steel construction with bright zinc plated finish.

High strength rolled threads 1/8" BSPT(M) on both ends.

Available in straight & bent Types.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
!TYPE
|-
|GSP/4/B
|100mm
|4in
|Straight
|-
|GBP/6/B
|150mm
|6in
|Bent
|}

=== Grease Cartridge ===
400 gms of premium lithium complex red grease NLGI grade 2.

Non messy, totally clean offering highest convenience in usage

Useful for all automotive, industrial, construction & agricultural applications

Recommended for use with GROZ grease guns
{| class="wikitable"
!CAT NR.
!DESCRIPTION
|-
|CTG/01P
|Grease Cartridge Capacity: 400 gms
|}
[[File:Ezee Lube Kit.jpg|alt=Ezee Lube Kit|thumb|Ezee Lube Kit]]

=== Ezee Lube Kit ===
A range of quick connect accessories suitable for most difficult greasing jobs.

'''CONSTITUENTS :-'''

'''Professional Recessed Lube Adaptor :''' For greasing of recessed fittings, or areas with obstruction where regular grease couplers cannot be used.

'''Grease Injector Needle :''' For greasing in very tight spaces, such as universal joints, sealed bearings etc.

'''Professional 90'''° '''Angled Lube Adaptor :''' Useful for greasing in shoulders & other confined areas.

'''Narrow Needle Nose Adaptor :''' Useful for greasing hard to reach fittings on trucks, vans etc.

'''Seal off Quick Dispenser :''' Converts a jaw type coupler to a seal off dispenser allowing it to be used for lubricating automobiles with grease plugs.

'''Right Angled Quick Coupler :''' Converts a regular coupler to a right angled coupler allowing it to be used for greasing of fittings with limited access.

'''Quick Connect Hose''' Converts a steel extension assembly to a flexible hose allowing access to hard to reach fittings.
{| class="wikitable"
!CAT NR.
|GAK/7
|}

=== Grease Fittings ===
Manufactured to the most stringent quality standards –TS 16949 approved Manufacturing.

Head profile & dimensions are accurately controlled & conform to DIN 71412.

Heat treated greasing ends Zinc plating exceeds ASTM B117.

Fittings have heat treated springs for increased life.

Available ready from stock in a large selection of popular types & sizes, with many more variations custom manufactured.
{| class="wikitable"
!CAT NR.
!TYPE
!HEX SIZE
!OVERALL LENGTH
!BOX QTY.
|-
! colspan="5" |6.0 × 1.0 MM TAPER THREADS
|-
|GFT/6/1
|Straight
|7 mm
|16 mm
|100
|-
|GFT/6/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/6/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |8.0 × 1.0 MM TAPER THREADS
|-
|GFT/8/1
|Straight
|9 mm
|16 mm
|100
|-
|GFT/8/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/8/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |10.0 × 1.0 MM TAPER THREADS
|-
|GFT/10/1
|Straight
|11 mm
|16 mm
|100
|-
|GFT/10/1/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/10/1/90
|90°
|11 mm
|18 mm
|50
|-
! colspan="5" |10.0 MM × 1.5 MM TAPER THREADS
|-
|GFT/10/1.5
|Straight
|11 mm
|18 mm max.
|100
|-
|GFT/10/1.5/45
|45°
|11 mm
|21 mm max.
|50
|-
|GFT/10/1.5/90
|90°
|11 mm
|18 mm max.
|50
|-
! colspan="5" |1/8" × 28 BSPT - TAPER THREADS
|-
|GFT/R/1-8/28
|Straight
|11 mm
|16 mm
|100
|-
|GFT/R/1-8/28L
|Straight
|11 mm
|20 mm
|50
|-
|GFT/R/1-8/28/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/R/1-8/28/45L
|45°
|11 mm
|26.3 mm
|50
|-
|GFT/R/1-8/28/90
|90°
|11 mm
|18 mm
|50
|-
|GFT/R/1-8/28/90L
|90°
|11 mm
|21.4 mm
|50
|-
! colspan="5" |1/4" × 19 BSPT - TAPER THREADS
|-
|GFT/R/1-4/19
|Straight
|9/16"
|17. 5 mm
|50
|-
|GFT/R/1-4/19L
|Straight
|15.24 mm
|23.5 mm
|25
|-
|GFT/R/1-4/19/45
|45°
|9/16"
|22.5 mm
|50
|-
|GFT/R/1-4/19/90
|90°
|9/16"
|22 mm
|50
|}

=== Grease Feeders ===
Grease Feeders are used to provide single point controlled lubrication for all types of bearing

housings thereby eliminating difficulties arising due to over or under greasing. Working on a spring compression mechanism, the design regulates grease discharge in proportion to changing spring pressure, thus maintaining constant discharge pressure of 1- 2 PSI. Die cast aluminium bodies with polycarbonate dome assembled with medium springs. Heavy & light spring come as spares in the same pack and can be easily interchanged depending upon application. Can be mounted in any position for easy visual inspection of grease levels.

Reusable: Can be refilled easily with immediate activation

1/8" (M) steel adaptor at the tail end fits directly onto bearing housings. Thread converters & angle adaptors available as spares. Remote Refill kit also available that permits remote filling of grease from distances up to 3 meters(10’)

==== '''SPRING SELECTION GUIDE''' ====
{| class="wikitable"
! colspan="2" |OPERATING TEMPERATURE
! colspan="5" |NLGI GREASE TYPE
|-
!FROM
!TO
!NO. 0
!NO. 1
!NO. 2
!NO. 3
!NO. 4
|-
| -23°C
|4°C
|Blue
|Silver
|Red
| -
| -
|-
|4°C
|43°C
|Blue
|Silver
|Silver
|Red
| -
|-
|43°C
|93°C
| -
|Blue
|Silver
|Silver
|Red
|-
|93°C
|121°C
| -
| -
|Blue
|Silver
|Red
|}

==== '''SIZE SELECTION GUIDE''' ====
{| class="wikitable"
!BEARING SHAFT DIA.
! colspan="4" |Upto 1-1/2" (38 mm)
! colspan="4" |1-1/2" (38 mm) & over
|-
!OPERATING CONDITION
! colspan="2" |Intermittent
! colspan="2" |Continuous
! colspan="2" |Intermittent
! colspan="2" |Continuous
|-
|CLASS OF BEARING
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|-
|UNDER 1000 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|2 oz.
|2 oz.
|-
|1000 TO 2500 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|-
|OVER 2500 RPM
|2 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|6 oz.
|6 oz.
|}
'''RECOMMENDED USE'''

For use with NLGI 0 to 4 non separating grease on any equipment that

• has anti friction, oscillating or roller bearings

• has shielded bearings with seals

• has bronze, olite or open bearings

• requires bearing flushing action
{| class="wikitable"
! rowspan="2" |CAT NR.
! colspan="2" |BOWL CAPACITY
! colspan="2" |OVERALL DIA.
! colspan="2" |OVERALL HEIGHT
|-
!(OZ.)
!(GMS)
!(INCH)
!(MM)
!(INCH)
!(MM)
|-
|GFD/PA/1/B
|1
|28
|1-3/4
|40
|3-5/8
|92
|-
|GFD/PA/2/B
|2
|56
|2-3/8
|60
|4-5/8
|117
|-
|GFD/PA/6/B
|6
|170
|3
|75
|6
|150
|}

== Portable Manual Grease Pump ==
{| class="wikitable"
!
! colspan="2" |CAT NO
!BUCKET CAPACITY
!DEVELOPS
!DELIVERS
|-
|Portable Greasing System - Manual
| colspan="2" |GS/5
|5
|UPTO 10,000 PSI (690 BAR)
ON HIGH PRESSURE SETTING
|UPTO 1.25 GMS / STROKE
ON HIGH VOLUME SETTING
|-
|Foot Operated Grease Pump
| colspan="2" |FOP/10A
|10
|UPTO 8,700 PSI (600 BAR)
|UPTO 2 GM / STROKE
|-
!
!Without Wheels
!With Wheels
|
|
|
|-
| rowspan="5" |Bucket Greasers
|VGP/3A/RF
| -
|3
| rowspan="5" |UPTO 4,000 PSI (275 BAR)
ON HIGH PRESSURE SETTING
| rowspan="5" |UPTO 9 GM / STROKE ON
HIGH VOLUME SETTING
|-
|VGP/6A
|VGP/6
|6
|-
|VGP/10A
|VGP/10
|10
|-
| -
|VGP/15
|15
|-
| -
|VGP/20
|20
|}

=== Portable Greasing System - Manual (GS/5) ===
Fully portable & single person operated manual greasing system. Portable Greasing System Manual Designed for volume greasing in workshop environments, site applications, on a pick-up truck, tractor, earth moving equipment etc. Pump is operated by foot press of the spring loaded system. The hose gets charged with grease, which can then be dispensed

through the super gun fitted at the end of the hose. A single charge provides upto 30 shots of grease.

'''High Pressure-High Volume Setting'''

Aluminium die cast super gun has high pressure & high volume settings, actuated through a simple switch. High pressure feature is very useful to open blocked grease fittings. Fully sealed pump assembly prevents contamination Complete with drum cover, rubber lined follower plate, premium 1/2" ID high pressure hose, super gun fitted with steel extension, coupler and 5 kg plastic grease bucket

=== Foot Operated Grease Pump ( FOP/10A ) ===
High pressure portable grease pump for quick effortless greasing in everyday lubrication such as greasing of excavators & other earth moving equipment, agricultural equipment, automotive etc.

'''Hands free operation'''

Pump operates using the foot lever, which greatly reduces effort & allows high pressure greasing with highest comfort. Can be operated by hand when under low machinery.

'''Economical'''

Pump is operated by a single person & uses low cost bulk grease. Designed with all moving parts submerged in the same grease which needs to be pumped, thereby staying

lubricated at all times. Moving parts create wave action in grease, auto removing air pockets & eliminating the use of a follower plate.

=== Bucket Greasers ( VGP ) ===
Volume grease pump designed for quick & effortless greasing in applications requiring large volume of lubrication everyday. For use with agricultural equipment, excavators & other earth moving equipment & in automotive applications.

'''Variable Handle Setting'''

can be set for high volume or high pressure grease discharge. Pump delivers upto 9gms of grease on high volume setting. Fully CNC machined to close tolerances the pump develops upto 4,000 PSI (275 BAR) on high pressure setting. Includes follower plate

* High Pressure Setting : Develops 4000 PSI with grease discharge of 4 gms per stroke
* Medium Pressure : Medium Volume Setting Develops 3,000 PSI with grease discharge of 7 gms per stroke
* High Volume Setting : Develops 2000 PSI with grease discharge of over 9 gms per stroke. Useful for bulk filling grease guns

=== Scoop & Swipe Set ( GSW/1/ST ) ===
Now you can avoid the mess while working with bulk grease with hands Use the GROZ Grease Scooper to avoid grease contamination and spillage in 3 simple steps

STEP 1 : Use the Scooper to draw sizable amount of grease from the bucket.

STEP 2 : Use the swipe to clean the Scoop from inside.

STEP 3 : Use the swipe to clean the Scoop from outside.

== Air Operated Grease Pump ==

=== Air Operated Grease Ratio Pumps 50:1 ===
Pump dispenses grease at pressures upto 50 times the air inlet pressure. Designed to work in tough conditions; these are ideal for use in industry, workshop, farm, construction or as part of the Mobile Grease System. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 63 mm dia. air motor . Strainer at suction tube inlet removes dirt, debris etc from entering into the system.

'''Specification :'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2–10 BAR)
|-
!MAXIMUM AIR PRESSURE
|150 PSI (10 BAR)
|-
!AIR INLET CONNECTION
|1/4" BSP (F)
|-
!PUMP OUTLET CONNECTION
|1/4" BSP (F)
|-
!AIR CONSUMPTION
|230 lt / min
|-
!NOISE LEVEL
|81 db
|}
Note : Pump must be supplied with clean & dry compressed air via an FRL unit
{| class="wikitable"
! rowspan="2" |CAT NR.
! rowspan="2" |DRUM SIZE
! rowspan="2" |SUCTION TUBE
LENGTH
! rowspan="2" |DRUM COVER DIA.
! rowspan="2" |DESCRIPTION
! colspan="3" |FOLLOWER PLATE DIMENSIONS
|-
!O.D.
STEELEND
!O.D.
PLATE
!I.D.
GROMMET
|-
| colspan="8" |'''GREASE PUMP KIT'''
|-
!GP1/ST/501/BSP
|20-30 KG
|440 MM
|305 MM
| rowspan="2" |Pump Supplied with drum cover,
rubber lined follower plate,

7' (84") of high pressure grease hose,

Z swivel & professional grease control valve
|241 mm
|288 mm
|29.5 mm
|-
!GP2/ST/501/BSP
|50-60 KG
|730 MM
|381 MM
|322 mm
|380 mm
|29.5 mm
|-
!GP3/ST4/501/BSP
|180 KG
|950 MM
|612 MM
|Pump Supplied with drum cover,
rubber lined follower plate,

7' (84") of high pressure grease hose,

Z swivel & Heavy Duty grease control valve
|550 mm
|602 mm
|29.5 mm
|-
!GP3/ST3/501/BSP
|180 KG
|950 MM
|612 MM
|Pump Supplied with drum cover
rubber lined follower plate only
|550 mm
|602 mm
|29.5 mm
|-
| colspan="8" |'''PUMP ONLY'''
|-
!GP3/501/BSP
|180 KG
|950 MM
| -
| colspan="4" |Pump only
|-
!GP3/501/N
|180 KG
|950 MM
| -
| colspan="4" |Pump only
|-
| colspan="8" |'''PORTABLE GREASE PUMP SYSTEM COMPLETE WITH GREASE DRUM'''
|-
!BGRP/15
| colspan="7" |15 KG
|-
!BGRP/30
| colspan="7" |30 KG
|-
!BGRP/50
| colspan="7" |50 KG
|}

=== High Volume Grease Ratio Pump 50:1 ===
Heavy Duty Industrial grade pneumatic pump. Particularly suitable for grease distribution in pipe works & installations where simultaneous grease supply is required on different dispensing points at high pressure or in large volume. Pump dispenses grease upto 50 times the air inlet pressure. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 3" (76 mm) dia. air motor. Stall free, ice free motor with tough durable housing, integrated muffler for quiet operation

'''No Service Required'''

With very few moving parts this rugged pump requires virtually no servicing. No special maintenance tools needed. Supplied complete with drum cover, rubber line follower plate, 3 m high pressure grease hose, Z swivel & professional grease control valve

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2-10 BAR)
|-
!AIR INLET CONNECTION
|1/4" NPT
|-
!PUMP OUTLET CONNECTION
|3/8"
|-
!AIR CONSUMPTION
|13 CFM
|-
!NOISE LEVE
|85-90 dB
|}
{| class="wikitable"
!CAT NR.
!FITS
|-
!GPH/1/ST/BSP
|20-30 kg pails
|-
!GPH/2/ST/BSP
|50-60 kg pails
|-
!GPH/3/ST/BSP
|180 kg drums
|}

=== Trolley Mounted Grease Pump Kits ===
Trolley Mounted kits are ideal for use in workshops, garages, shop floors, providing complete portability for everyday greasing jobs

A typical kit is formed of

1. 50:1 Air Operated Grease Pump

2. Steel Drum Cover

3. Rubber Lined Follower Plate

4. Grease Hose

5. Grease Control valve fitted with Z Swivel

6. Drum Trolley

7. 1/4" Miniature Air Filter-Regulator & Lubricator

8. Hose Reel*

4 heavy duty castors for ease of movement. Rear castors with toe-locks that ensure safety Kit comes in CKD form & can be assembled quickly

<nowiki>*</nowiki>only on 180 kg version

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2-10 BAR)
|-
!HOSE
|84" High Pressure
|-
!AIR CONSUMPTION OF PUMP
|230 LPM
|-
!NOISE LEVEL
|81 db
|-
!FILTERING ELEMENT IN FILTER
|40 Micron
|}
{| class="wikitable"
!CAT NR.
|FITS
|-
!TMK/GP1/A/BSP
|20-30 kgs drums
|-
!TMK/GP2/A/BSP
|50-60 kgs drums
|-
!TMK/GP3H/A/BSP
|180 kg drum
|}

=== maxilube® Air Operated 50:1 Grease Pump ( P8-G ) ===
Maxilube is product range of Macnaut Brand. Pump dispenses grease at 50X the pressure as the air inlet. Non-corroding air motor requires no lubricator in the air line. Built–in pressure relief valve prevents damage created by excessive pressure due to thermal expansion. Ideal for use in automotive workshops. With drum cover, rubber lining follower plate, 84" high pressure rubber hose & booster grease control valve fitted with z-swivel, steel extension & coupler.

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|60-150 PSI (4–10 BAR )
|-
!MAXIMUM AIR PRESSURE
|150 PSI (10 BAR)
|-
!MAXIMUM OUTLET PRESSURE
|7500 PSI (500 BAR)
|-
!AIR INLET CONNECTION
|1/4" NPT (F)
|-
!PUMP OUTLET CONNECTION
|1/4" NPT (F)
|-
!AIR CONSUMPTION
|270 lt / min
|-
!GREASE OUTPUT (NLGI NO. 2 GREASE)
|0.460 kg / min
|-
!NOISE LEVEL
|85 db
|}

=== Portable Greasing System ( GS100-G ) ===
Designed to cater to daily bulk greasing needs at workshops requiring movable systems Includes

a. maxilube® Air Operated 50:1 pump suitable for 180 kg drums

b. Pump complete with drum cover, follower plate, 84" high pressure grease hose

c. Booster grease control valve

d. Retracta auto rewind grease hose reel

e. Drum Trolley for 180kg drums

=== Grease Control Valve ===

==== Professional ====
Grease control valve for use with air operated grease pumps. Highly durable all steel construction, fully CNC machined. Dispenses grease at the same pressure as the pressure at pump outlet Valve inlet fitted with 360° Z-swivel for convenient handling and to prevent hose from kinking. Complete with 6" steel extension & heavy duty coupler.

==== Booster ====
Grease control valve for use with air operated grease pumps. Built-in pressure boost mechanism allows grease pressure to be boosted from 6,000 PSI to 10,000 PSI. Pressure boost helps unclog blocked grease fittings & grease joints with high back pressure. Pressure boost is activated by a few repeated presses of the pistol handle. Highly durable all steel construction, fully CNC machined. Valve inlet fitted with 360° Z-swivel for convenient handling and to prevent hose from kinking. Complete with 6"steel extension & heavy duty coupler.
{| class="wikitable"
!
!CAT NR.
!INLET THREADS
!OUTLET THREADS
|-
!Professional
!APG/HD/Z/1-4F/B
|1/4" BSPT (F)
|1/8" BSPT (F)
|-
!Booster
!APG/Z/1-4F/B
|1/4" BSPT (F)
|1/8" BSPT (F)
|}

=== Grease Control Valve - Metered ===
Premium quality grease control valve, for use with air operated grease pumps. Built-in high accuracy digital grease meter for dispensing exact amount of grease. Ability to measure amount of grease dispensed prevents both over & under lubrication & is useful in saving bearing failures. Provides continuous grease flow, with trigger fully pressed. Steel construction, provides durability & longevity. Meter uses oval gear mechanism. Ergonomically designed pistol handle. Comes complete with 6" steel extension, heavy duty coupler & 360° Z swivel.

'''Specification'''
{| class="wikitable"
!CAT No
|APG/HD/Z/1-4F/GM/B (Gun+Meter)
|-
!
|DGM/2/N (Meter Only)
|-
!CONTROL VALVE TYPE
|Continuous Flow
|-
!METER TYPE
|Digital Oval Gear
|-
!GREASE FLOW
|0.1 to 2.5 kg / minute
|-
!MAX. WORKING PRESSURE
|7,500 PSI (517 BAR)
|-
!UNIT OF MEASUREMENT
|kg /gms / lbs
|-
!ACCURACY
|± 3%
|-
!RESETTABLE BATCH TOTAL
|9,999 gms
|-
!CUMULATIVE TOTAL
|99999.9 kg
|-
!BATTERY TYPE
|1.5 V (Two numbers)
|}

GREASING EQUIPMENT

2022-08-03T07:00:36Z

Bhavinrathod: /* Trolley Mounted Grease Pump Kits */

== Grease Gun ==

=== All Grease Gun Comparision ===
{| class="wikitable"
!CAT NR.
!DETAILS
!DELIVERS
!DEVELOPS
!CAPACITY
|-
!K45R/B
|150 mm rigid steel extension & 3 jaw coupler
|UPTO 1.5 GM / STROKE
| colspan="2" |UPTO 10,000 PSI (690 BAR)
|-
!G1R/HD/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 10,000 PSI (690 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/CP/B
|Zinc Plated,150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/BL/B
|Powder Coated, 150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G2R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 2.4 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G1R/B/T/EC/BL
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G5R/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.50 GM / STROKE
|UPTO 5,000 PSI (345 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G14R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 0.55 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|120 CC BULK / 85 GMS CARTRIDGE
|-
!G-16/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.40 GM / STROKE
|UPTO 3,500 PSI (240 BAR)
|120 GMS BULK / 85 GMS CARTRIDGE
|}

=== The Ultimate Lever Grease Gun - K45R/B ===
High capacity - high output lever grease gun Large 650gm capacity barrel for less frequent refilling

Reduce greasing time to one-half : 30% larger dia pistons pushes out 50% more grease /stroke than regular guns Aluminum die cast head fitted with bulk loader valve Heavy gauge drop resistant steel barrel in premium metallic powder coated finish.

Variable Stroke : Convenient greasing in tight spaces with limited movement of handle. High compression spring for removing air pockets from grease. Fully serviceable with no riveted parts. Works with NLGI 1, 2 & 3 greases

=== Lever Grease Gun Heavy Duty - G1R/HD/B ===
Designed for heavy industrial applications. Solid aluminium grease gun head fitted with air bleeder & bulk loader valves 1.2 mm thick steel barrel with heavy duty follower spring, CNC machined head & rolled threads for fast & easy reloading

Unique Lock Lever Mechanism : Allows user to easily lock plunger rod in any position.

Variable Stroke ''':''' Convenient greasing in tight spaces with limited movement of handle Resists back pressure, especially useful in chain tightening of earth moving equipment.

=== Lever Grease Guns Heavy Duty - V Series - V1R/HD/CP/B & V1R/HD/BL/B ===
Professional model – ideal for lubrication in automotive workshops, agricultural & light industrial application. Aluminium die cast grease gun head with built-in air bleeder valve Robust steel barrel with knurling for firm grip. Heavy duty handle with ergonomic non slip soft rubber grip

Available in 2 Finishes :

a. Zinc plated

b. Black Powder Coated

=== Lever Grease Gun Dual Piston - G2R/B ===
The high output greasing solution! For greasing applications requiring voluminous and frequent greasing, especially on agricultureal & construction machinery

Reduce Greasing Time To One-Third : Dual piston mechanism results in triple output per stroke reducing greasing time to one-third.

No Loss of Prime : Dual inlet of grease ensures that gun does not lose prime

=== Lever Grease Guns - V Series - V1R/B ===
21st century design – ideal combination of superior quality & value price. Suitable for use in general lubrication & daily maintenance work. Aluminium die cast grease gun head with built-in air release valve. Soft rubber grip on lever handle for comfortable operation. Durable powder coated Finish

=== Lever Grease Gun - Super Value - G1R/B/T/EC/BL ===
Most popular value priced grease gun - for general purpose lubrication across all sorts of applications Drop resistant steel head with a bulk loader valve. Soft rubber grip on lever handle for comfortable use Durable powder coated Finish

=== Pistol Grip Grease Gun - G5R/B ===
Most popular one hand grease gun designed for use in confined spaces or where access to grease nipples is restricted. 1.2 mm thick steel barrel with heavy duty follower spring. Rolled threads for fast & easy reloading. Aluminium die cast CNC machined head with steel block nut Pistol handle designed to prevent fingers from pinching

=== Mini Lever Grease Gun - G14R/B ===
When you need a tough little grease gun for hard to reach places, this is it! Compact tool box size grease gun. Aluminium die cast head.

=== Mini Pistol Grease Gun - Deluxe - G-16/B ===
One hand pistol grip grease gun with convenient pull type operating mechanism. Aluminum cast head with front & top discharge ports. Durable powder coated Finish. Ideal for greasing in tight spaces such as CNC machines.

== Air Operated Grease Gun ==
High power, continuous flow air operated grease gun.

Continuous discharge of grease with the trigger pressed.

For use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to vehicle air brake compressors.
{| class="wikitable"
!AIR OPERATING RANGE
|40-120 PSI (3-8 BAR)
|-
!PRESSURE RATIO
|40:01:00
|-
!AIR COMPRESSOR VOLUME
|1 CFM / 0.026 CBM @ 6 BAR
|-
!AIR INLET THREADING
|1/4" (F)
|}
{| class="wikitable"
!CAT NR.
!DETAILS
|-
|AGG/1R/B
|150 mm rigid steel extension & 4 jaw coupler
|}

== Battery Powered Grease Gun ==
Powerful 19.2V high torque Motor.

Standard 1.5Ah Ni-Cd battery pack with an additional battery pack for uninterrupted greasing.

Automatic air release valve & bulk loader.

Each battery charge provides power to dispense upto 2.4 kg grease in free flow condition.

Complete with 30" high pressure hose with spring guard on both ends (prevents hose from kinking), 4 jaw coupler & 400 gm grease cartridge.

Packed in a blow moulded case for safe storage & ease of transportation.

Designed for use by mechanics, technicians, maintenance staff, farmers etc. for everyday greasing & preventive maintenance jobs.
{| class="wikitable"
!CAT NR.
!DETAILS
|-
! colspan="2" |GREASE GUN ASSEMBLY
|-
|BPGG/19/EU-CTG/01P
|Cordless grease gun with 220V/50Hz Battery Charger, 2 pin plug & 400 gm grease cartridge
|-
! colspan="2" |SPARE PARTS & ACCESSORIES
|-
|RB/BPGG/19N
|Rechargeable Battery, 19.2V, 1.5 Ah, Ni-Cd
|-
|BC/BPGG/19N/EU
|1 hour CE energy saving battery charger, 220V/50Hz., 19.2V, 2 pin plug
|-
|SS/BPGG/19N
|Carrying / Shoulder strap
|-
|CTG/01P
|400 gms grease cartridge
|-
|BMC/BPGG/19N
|Carrying case / Blow moulded case
|}

== Grease Accesories ==

=== Hydraulic Couplers ===

==== - Standard ====
Most popular couplers for use with grease guns for general maintenance. Narrow coupler design for use on fittings with limited access. Milled slot for easy tightening. Fully hardened spring steel jaws. Recommended for use with hand operated grease guns.

==== - Professional ====
Best selling coupler for professional use. Hardened coupler body withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy tightening Recommended for use with hand operated grease guns.

==== - Heavy Duty ====
Heavy duty couplers recommended for use with air operated grease guns. Hardened coupler body with double wall thickness withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy Tightening.
{| class="wikitable"
!
!CAT NR.
!THREADS
!JAWS
!PRESSURE
|-
! rowspan="2" |Standard
|HC/11/4/B
|1/8" BSPT
|4
| rowspan="2" |UPTO 3,000 PSI
(207 BAR)
|-
|HC/11/4/BSP
|1/8" BSP
|4
|-
! rowspan="2" |Professional
|HC/14/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 6,000 PSI
(413 BAR)
|-
|HC/14/4/B
|1/8" BSPT
|4
|-
! rowspan="2" |Heavy Duty
|HC/12/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 10,000 PSI
(690 BAR)
|-
|HC/12/4/B
|1/8" BSPT
|4
|}

=== Push-on Grease Couplers ===
Push-on grease couplers for use with button head grease fittings, found mainly on heavy machinery, agricultural & contractor’s equipment etc. Zinc die cast construction Metal seal imparts increased resistance to wear. Couplers conveniently slide over the face of the button head fittings. Threaded 1/8" BSPT (F)
{| class="wikitable"
!CAT NR.
! colspan="2" |Pressure
|-
|PCN/1/B
|3000 PSI
|207 BAR
|-
|PCN/3/B
|6000 PSI
|413 BAR
|-
|PCN/2/B
|7500 PSI
|517 BAR
|}
[[File:Grease Gun Hose.jpg|alt=Grease Gun Hose|thumb|339x339px|Grease Gun Hose]]

=== Grease Gun Hoses ===
Grease hoses facilitate greasing of fittings in areas with limited access .

Thermoplastic construction, fully flexible with outer diameter (O.D.) 8.5 mm.

Zinc plated steel end connections with hydraulic crimping.

Threaded 1/8" BSPT (M) on both ends.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
|-
|GHC-12/B
|300 mm
|12 in
|-
|GHC-18/B
|450 mm
|18 in
|-
|GHC-20/B
|500 mm
|20 in
|}
[[File:Grease Gun Steel Extensions.jpg|alt=Grease Gun Steel Extensions|thumb|245x245px|Grease Gun Steel Extensions]]

=== Grease Gun Steel Extensions ===
Steel construction with bright zinc plated finish.

High strength rolled threads 1/8" BSPT(M) on both ends.

Available in straight & bent Types.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
!TYPE
|-
|GSP/4/B
|100mm
|4in
|Straight
|-
|GBP/6/B
|150mm
|6in
|Bent
|}

=== Grease Cartridge ===
400 gms of premium lithium complex red grease NLGI grade 2.

Non messy, totally clean offering highest convenience in usage

Useful for all automotive, industrial, construction & agricultural applications

Recommended for use with GROZ grease guns
{| class="wikitable"
!CAT NR.
!DESCRIPTION
|-
|CTG/01P
|Grease Cartridge Capacity: 400 gms
|}
[[File:Ezee Lube Kit.jpg|alt=Ezee Lube Kit|thumb|Ezee Lube Kit]]

=== Ezee Lube Kit ===
A range of quick connect accessories suitable for most difficult greasing jobs.

'''CONSTITUENTS :-'''

'''Professional Recessed Lube Adaptor :''' For greasing of recessed fittings, or areas with obstruction where regular grease couplers cannot be used.

'''Grease Injector Needle :''' For greasing in very tight spaces, such as universal joints, sealed bearings etc.

'''Professional 90'''° '''Angled Lube Adaptor :''' Useful for greasing in shoulders & other confined areas.

'''Narrow Needle Nose Adaptor :''' Useful for greasing hard to reach fittings on trucks, vans etc.

'''Seal off Quick Dispenser :''' Converts a jaw type coupler to a seal off dispenser allowing it to be used for lubricating automobiles with grease plugs.

'''Right Angled Quick Coupler :''' Converts a regular coupler to a right angled coupler allowing it to be used for greasing of fittings with limited access.

'''Quick Connect Hose''' Converts a steel extension assembly to a flexible hose allowing access to hard to reach fittings.
{| class="wikitable"
!CAT NR.
|GAK/7
|}

=== Grease Fittings ===
Manufactured to the most stringent quality standards –TS 16949 approved Manufacturing.

Head profile & dimensions are accurately controlled & conform to DIN 71412.

Heat treated greasing ends Zinc plating exceeds ASTM B117.

Fittings have heat treated springs for increased life.

Available ready from stock in a large selection of popular types & sizes, with many more variations custom manufactured.
{| class="wikitable"
!CAT NR.
!TYPE
!HEX SIZE
!OVERALL LENGTH
!BOX QTY.
|-
! colspan="5" |6.0 × 1.0 MM TAPER THREADS
|-
|GFT/6/1
|Straight
|7 mm
|16 mm
|100
|-
|GFT/6/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/6/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |8.0 × 1.0 MM TAPER THREADS
|-
|GFT/8/1
|Straight
|9 mm
|16 mm
|100
|-
|GFT/8/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/8/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |10.0 × 1.0 MM TAPER THREADS
|-
|GFT/10/1
|Straight
|11 mm
|16 mm
|100
|-
|GFT/10/1/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/10/1/90
|90°
|11 mm
|18 mm
|50
|-
! colspan="5" |10.0 MM × 1.5 MM TAPER THREADS
|-
|GFT/10/1.5
|Straight
|11 mm
|18 mm max.
|100
|-
|GFT/10/1.5/45
|45°
|11 mm
|21 mm max.
|50
|-
|GFT/10/1.5/90
|90°
|11 mm
|18 mm max.
|50
|-
! colspan="5" |1/8" × 28 BSPT - TAPER THREADS
|-
|GFT/R/1-8/28
|Straight
|11 mm
|16 mm
|100
|-
|GFT/R/1-8/28L
|Straight
|11 mm
|20 mm
|50
|-
|GFT/R/1-8/28/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/R/1-8/28/45L
|45°
|11 mm
|26.3 mm
|50
|-
|GFT/R/1-8/28/90
|90°
|11 mm
|18 mm
|50
|-
|GFT/R/1-8/28/90L
|90°
|11 mm
|21.4 mm
|50
|-
! colspan="5" |1/4" × 19 BSPT - TAPER THREADS
|-
|GFT/R/1-4/19
|Straight
|9/16"
|17. 5 mm
|50
|-
|GFT/R/1-4/19L
|Straight
|15.24 mm
|23.5 mm
|25
|-
|GFT/R/1-4/19/45
|45°
|9/16"
|22.5 mm
|50
|-
|GFT/R/1-4/19/90
|90°
|9/16"
|22 mm
|50
|}

=== Grease Feeders ===
Grease Feeders are used to provide single point controlled lubrication for all types of bearing

housings thereby eliminating difficulties arising due to over or under greasing. Working on a spring compression mechanism, the design regulates grease discharge in proportion to changing spring pressure, thus maintaining constant discharge pressure of 1- 2 PSI. Die cast aluminium bodies with polycarbonate dome assembled with medium springs. Heavy & light spring come as spares in the same pack and can be easily interchanged depending upon application. Can be mounted in any position for easy visual inspection of grease levels.

Reusable: Can be refilled easily with immediate activation

1/8" (M) steel adaptor at the tail end fits directly onto bearing housings. Thread converters & angle adaptors available as spares. Remote Refill kit also available that permits remote filling of grease from distances up to 3 meters(10’)

==== '''SPRING SELECTION GUIDE''' ====
{| class="wikitable"
! colspan="2" |OPERATING TEMPERATURE
! colspan="5" |NLGI GREASE TYPE
|-
!FROM
!TO
!NO. 0
!NO. 1
!NO. 2
!NO. 3
!NO. 4
|-
| -23°C
|4°C
|Blue
|Silver
|Red
| -
| -
|-
|4°C
|43°C
|Blue
|Silver
|Silver
|Red
| -
|-
|43°C
|93°C
| -
|Blue
|Silver
|Silver
|Red
|-
|93°C
|121°C
| -
| -
|Blue
|Silver
|Red
|}

==== '''SIZE SELECTION GUIDE''' ====
{| class="wikitable"
!BEARING SHAFT DIA.
! colspan="4" |Upto 1-1/2" (38 mm)
! colspan="4" |1-1/2" (38 mm) & over
|-
!OPERATING CONDITION
! colspan="2" |Intermittent
! colspan="2" |Continuous
! colspan="2" |Intermittent
! colspan="2" |Continuous
|-
|CLASS OF BEARING
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|-
|UNDER 1000 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|2 oz.
|2 oz.
|-
|1000 TO 2500 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|-
|OVER 2500 RPM
|2 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|6 oz.
|6 oz.
|}
'''RECOMMENDED USE'''

For use with NLGI 0 to 4 non separating grease on any equipment that

• has anti friction, oscillating or roller bearings

• has shielded bearings with seals

• has bronze, olite or open bearings

• requires bearing flushing action
{| class="wikitable"
! rowspan="2" |CAT NR.
! colspan="2" |BOWL CAPACITY
! colspan="2" |OVERALL DIA.
! colspan="2" |OVERALL HEIGHT
|-
!(OZ.)
!(GMS)
!(INCH)
!(MM)
!(INCH)
!(MM)
|-
|GFD/PA/1/B
|1
|28
|1-3/4
|40
|3-5/8
|92
|-
|GFD/PA/2/B
|2
|56
|2-3/8
|60
|4-5/8
|117
|-
|GFD/PA/6/B
|6
|170
|3
|75
|6
|150
|}

== Portable Manual Grease Pump ==
{| class="wikitable"
!
! colspan="2" |CAT NO
!BUCKET CAPACITY
!DEVELOPS
!DELIVERS
|-
|Portable Greasing System - Manual
| colspan="2" |GS/5
|5
|UPTO 10,000 PSI (690 BAR)
ON HIGH PRESSURE SETTING
|UPTO 1.25 GMS / STROKE
ON HIGH VOLUME SETTING
|-
|Foot Operated Grease Pump
| colspan="2" |FOP/10A
|10
|UPTO 8,700 PSI (600 BAR)
|UPTO 2 GM / STROKE
|-
!
!Without Wheels
!With Wheels
|
|
|
|-
| rowspan="5" |Bucket Greasers
|VGP/3A/RF
| -
|3
| rowspan="5" |UPTO 4,000 PSI (275 BAR)
ON HIGH PRESSURE SETTING
| rowspan="5" |UPTO 9 GM / STROKE ON
HIGH VOLUME SETTING
|-
|VGP/6A
|VGP/6
|6
|-
|VGP/10A
|VGP/10
|10
|-
| -
|VGP/15
|15
|-
| -
|VGP/20
|20
|}

=== Portable Greasing System - Manual (GS/5) ===
Fully portable & single person operated manual greasing system. Portable Greasing System Manual Designed for volume greasing in workshop environments, site applications, on a pick-up truck, tractor, earth moving equipment etc. Pump is operated by foot press of the spring loaded system. The hose gets charged with grease, which can then be dispensed

through the super gun fitted at the end of the hose. A single charge provides upto 30 shots of grease.

'''High Pressure-High Volume Setting'''

Aluminium die cast super gun has high pressure & high volume settings, actuated through a simple switch. High pressure feature is very useful to open blocked grease fittings. Fully sealed pump assembly prevents contamination Complete with drum cover, rubber lined follower plate, premium 1/2" ID high pressure hose, super gun fitted with steel extension, coupler and 5 kg plastic grease bucket

=== Foot Operated Grease Pump ( FOP/10A ) ===
High pressure portable grease pump for quick effortless greasing in everyday lubrication such as greasing of excavators & other earth moving equipment, agricultural equipment, automotive etc.

'''Hands free operation'''

Pump operates using the foot lever, which greatly reduces effort & allows high pressure greasing with highest comfort. Can be operated by hand when under low machinery.

'''Economical'''

Pump is operated by a single person & uses low cost bulk grease. Designed with all moving parts submerged in the same grease which needs to be pumped, thereby staying

lubricated at all times. Moving parts create wave action in grease, auto removing air pockets & eliminating the use of a follower plate.

=== Bucket Greasers ( VGP ) ===
Volume grease pump designed for quick & effortless greasing in applications requiring large volume of lubrication everyday. For use with agricultural equipment, excavators & other earth moving equipment & in automotive applications.

'''Variable Handle Setting'''

can be set for high volume or high pressure grease discharge. Pump delivers upto 9gms of grease on high volume setting. Fully CNC machined to close tolerances the pump develops upto 4,000 PSI (275 BAR) on high pressure setting. Includes follower plate

* High Pressure Setting : Develops 4000 PSI with grease discharge of 4 gms per stroke
* Medium Pressure : Medium Volume Setting Develops 3,000 PSI with grease discharge of 7 gms per stroke
* High Volume Setting : Develops 2000 PSI with grease discharge of over 9 gms per stroke. Useful for bulk filling grease guns

=== Scoop & Swipe Set ( GSW/1/ST ) ===
Now you can avoid the mess while working with bulk grease with hands Use the GROZ Grease Scooper to avoid grease contamination and spillage in 3 simple steps

STEP 1 : Use the Scooper to draw sizable amount of grease from the bucket.

STEP 2 : Use the swipe to clean the Scoop from inside.

STEP 3 : Use the swipe to clean the Scoop from outside.

== Air Operated Grease Pump ==

=== Air Operated Grease Ratio Pumps 50:1 ===
Pump dispenses grease at pressures upto 50 times the air inlet pressure. Designed to work in tough conditions; these are ideal for use in industry, workshop, farm, construction or as part of the Mobile Grease System. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 63 mm dia. air motor . Strainer at suction tube inlet removes dirt, debris etc from entering into the system.

'''Specification :'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2–10 BAR)
|-
!MAXIMUM AIR PRESSURE
|150 PSI (10 BAR)
|-
!AIR INLET CONNECTION
|1/4" BSP (F)
|-
!PUMP OUTLET CONNECTION
|1/4" BSP (F)
|-
!AIR CONSUMPTION
|230 lt / min
|-
!NOISE LEVEL
|81 db
|}
Note : Pump must be supplied with clean & dry compressed air via an FRL unit
{| class="wikitable"
! rowspan="2" |CAT NR.
! rowspan="2" |DRUM SIZE
! rowspan="2" |SUCTION TUBE
LENGTH
! rowspan="2" |DRUM COVER DIA.
! rowspan="2" |DESCRIPTION
! colspan="3" |FOLLOWER PLATE DIMENSIONS
|-
!O.D.
STEELEND
!O.D.
PLATE
!I.D.
GROMMET
|-
| colspan="8" |'''GREASE PUMP KIT'''
|-
!GP1/ST/501/BSP
|20-30 KG
|440 MM
|305 MM
| rowspan="2" |Pump Supplied with drum cover, rubber lined
follower plate, 7' (84") of high pressure grease
hose, Z swivel & professional grease control valve
|241 mm
|288 mm
|29.5 mm
|-
!GP2/ST/501/BSP
|50-60 KG
|730 MM
|381 MM
|322 mm
|380 mm
|29.5 mm
|-
!GP3/ST4/501/BSP
|180 KG
|950 MM
|612 MM
|Pump Supplied with drum cover, rubber lined
follower plate, 7' (84") of high pressure grease
hose, Z swivel & Heavy Duty grease control valve
|550 mm
|602 mm
|29.5 mm
|-
!GP3/ST3/501/BSP
|180 KG
|950 MM
|612 MM
|Pump Supplied with drum cover & rubber lined
follower plate only
|550 mm
|602 mm
|29.5 mm
|-
| colspan="8" |'''PUMP ONLY'''
|-
!GP3/501/BSP
|180 KG
|950 MM
| -
|Pump only
|
|
|
|-
!GP3/501/N
|180 KG
|950 MM
| -
|Pump only
|
|
|
|-
| colspan="8" |'''PORTABLE GREASE PUMP SYSTEM COMPLETE WITH GREASE DRUM'''
|-
!BGRP/15
|15 KG
|
|
|
|
|
|
|-
!BGRP/30
|30 KG
|
|
|
|
|
|
|-
!BGRP/50
|50 KG
|
|
|
|
|
|
|}

=== High Volume Grease Ratio Pump 50:1 ===
Heavy Duty Industrial grade pneumatic pump. Particularly suitable for grease distribution in pipe works & installations where simultaneous grease supply is required on different dispensing points at high pressure or in large volume. Pump dispenses grease upto 50 times the air inlet pressure. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 3" (76 mm) dia. air motor. Stall free, ice free motor with tough durable housing, integrated muffler for quiet operation

'''No Service Required'''

With very few moving parts this rugged pump requires virtually no servicing. No special maintenance tools needed. Supplied complete with drum cover, rubber line follower plate, 3 m high pressure grease hose, Z swivel & professional grease control valve

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2-10 BAR)
|-
!AIR INLET CONNECTION
|1/4" NPT
|-
!PUMP OUTLET CONNECTION
|3/8"
|-
!AIR CONSUMPTION
|13 CFM
|-
!NOISE LEVE
|85-90 dB
|}
{| class="wikitable"
!CAT NR.
!FITS
|-
!GPH/1/ST/BSP
|20-30 kg pails
|-
!GPH/2/ST/BSP
|50-60 kg pails
|-
!GPH/3/ST/BSP
|180 kg drums
|}

=== Trolley Mounted Grease Pump Kits ===
Trolley Mounted kits are ideal for use in workshops, garages, shop floors, providing complete portability for everyday greasing jobs

A typical kit is formed of

1. 50:1 Air Operated Grease Pump

2. Steel Drum Cover

3. Rubber Lined Follower Plate

4. Grease Hose

5. Grease Control valve fitted with Z Swivel

6. Drum Trolley

7. 1/4" Miniature Air Filter-Regulator & Lubricator

8. Hose Reel*

4 heavy duty castors for ease of movement. Rear castors with toe-locks that ensure safety Kit comes in CKD form & can be assembled quickly

<nowiki>*</nowiki>only on 180 kg version

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2-10 BAR)
|-
!HOSE
|84" High Pressure
|-
!AIR CONSUMPTION OF PUMP
|230 LPM
|-
!NOISE LEVEL
|81 db
|-
!FILTERING ELEMENT IN FILTER
|40 Micron
|}
{| class="wikitable"
!CAT NR.
|FITS
|-
!TMK/GP1/A/BSP
|20-30 kgs drums
|-
!TMK/GP2/A/BSP
|50-60 kgs drums
|-
!TMK/GP3H/A/BSP
|180 kg drum
|}

=== maxilube® Air Operated 50:1 Grease Pump ( P8-G ) ===
Maxilube is product range of Macnaut Brand. Pump dispenses grease at 50X the pressure as the air inlet. Non-corroding air motor requires no lubricator in the air line. Built–in pressure relief valve prevents damage created by excessive pressure due to thermal expansion. Ideal for use in automotive workshops. With drum cover, rubber lining follower plate, 84" high pressure rubber hose & booster grease control valve fitted with z-swivel, steel extension & coupler.

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|60-150 PSI (4–10 BAR )
|-
!MAXIMUM AIR PRESSURE
|150 PSI (10 BAR)
|-
!MAXIMUM OUTLET PRESSURE
|7500 PSI (500 BAR)
|-
!AIR INLET CONNECTION
|1/4" NPT (F)
|-
!PUMP OUTLET CONNECTION
|1/4" NPT (F)
|-
!AIR CONSUMPTION
|270 lt / min
|-
!GREASE OUTPUT (NLGI NO. 2 GREASE)
|0.460 kg / min
|-
!NOISE LEVEL
|85 db
|}

=== Portable Greasing System ( GS100-G ) ===
Designed to cater to daily bulk greasing needs at workshops requiring movable systems Includes

a. maxilube® Air Operated 50:1 pump suitable for 180 kg drums

b. Pump complete with drum cover, follower plate, 84" high pressure grease hose

c. Booster grease control valve

d. Retracta auto rewind grease hose reel

e. Drum Trolley for 180kg drums

=== Grease Control Valve ===

==== Professional ====
Grease control valve for use with air operated grease pumps. Highly durable all steel construction, fully CNC machined. Dispenses grease at the same pressure as the pressure at pump outlet Valve inlet fitted with 360° Z-swivel for convenient handling and to prevent hose from kinking. Complete with 6" steel extension & heavy duty coupler.

==== Booster ====
Grease control valve for use with air operated grease pumps. Built-in pressure boost mechanism allows grease pressure to be boosted from 6,000 PSI to 10,000 PSI. Pressure boost helps unclog blocked grease fittings & grease joints with high back pressure. Pressure boost is activated by a few repeated presses of the pistol handle. Highly durable all steel construction, fully CNC machined. Valve inlet fitted with 360° Z-swivel for convenient handling and to prevent hose from kinking. Complete with 6"steel extension & heavy duty coupler.
{| class="wikitable"
!
!CAT NR.
!INLET THREADS
!OUTLET THREADS
|-
!Professional
!APG/HD/Z/1-4F/B
|1/4" BSPT (F)
|1/8" BSPT (F)
|-
!Booster
!APG/Z/1-4F/B
|1/4" BSPT (F)
|1/8" BSPT (F)
|}

=== Grease Control Valve - Metered ===
Premium quality grease control valve, for use with air operated grease pumps. Built-in high accuracy digital grease meter for dispensing exact amount of grease. Ability to measure amount of grease dispensed prevents both over & under lubrication & is useful in saving bearing failures. Provides continuous grease flow, with trigger fully pressed. Steel construction, provides durability & longevity. Meter uses oval gear mechanism. Ergonomically designed pistol handle. Comes complete with 6" steel extension, heavy duty coupler & 360° Z swivel.

'''Specification'''
{| class="wikitable"
!CAT No
|APG/HD/Z/1-4F/GM/B (Gun+Meter)
|-
!
|DGM/2/N (Meter Only)
|-
!CONTROL VALVE TYPE
|Continuous Flow
|-
!METER TYPE
|Digital Oval Gear
|-
!GREASE FLOW
|0.1 to 2.5 kg / minute
|-
!MAX. WORKING PRESSURE
|7,500 PSI (517 BAR)
|-
!UNIT OF MEASUREMENT
|kg /gms / lbs
|-
!ACCURACY
|± 3%
|-
!RESETTABLE BATCH TOTAL
|9,999 gms
|-
!CUMULATIVE TOTAL
|99999.9 kg
|-
!BATTERY TYPE
|1.5 V (Two numbers)
|}

GREASING EQUIPMENT

2022-08-03T05:53:41Z

Bhavinrathod: /* Air Operated Grease Ratio Pumps 50:1 */

== Grease Gun ==

=== All Grease Gun Comparision ===
{| class="wikitable"
!CAT NR.
!DETAILS
!DELIVERS
!DEVELOPS
!CAPACITY
|-
!K45R/B
|150 mm rigid steel extension & 3 jaw coupler
|UPTO 1.5 GM / STROKE
| colspan="2" |UPTO 10,000 PSI (690 BAR)
|-
!G1R/HD/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 10,000 PSI (690 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/CP/B
|Zinc Plated,150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/BL/B
|Powder Coated, 150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G2R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 2.4 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G1R/B/T/EC/BL
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G5R/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.50 GM / STROKE
|UPTO 5,000 PSI (345 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G14R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 0.55 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|120 CC BULK / 85 GMS CARTRIDGE
|-
!G-16/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.40 GM / STROKE
|UPTO 3,500 PSI (240 BAR)
|120 GMS BULK / 85 GMS CARTRIDGE
|}

=== The Ultimate Lever Grease Gun - K45R/B ===
High capacity - high output lever grease gun Large 650gm capacity barrel for less frequent refilling

Reduce greasing time to one-half : 30% larger dia pistons pushes out 50% more grease /stroke than regular guns Aluminum die cast head fitted with bulk loader valve Heavy gauge drop resistant steel barrel in premium metallic powder coated finish.

Variable Stroke : Convenient greasing in tight spaces with limited movement of handle. High compression spring for removing air pockets from grease. Fully serviceable with no riveted parts. Works with NLGI 1, 2 & 3 greases

=== Lever Grease Gun Heavy Duty - G1R/HD/B ===
Designed for heavy industrial applications. Solid aluminium grease gun head fitted with air bleeder & bulk loader valves 1.2 mm thick steel barrel with heavy duty follower spring, CNC machined head & rolled threads for fast & easy reloading

Unique Lock Lever Mechanism : Allows user to easily lock plunger rod in any position.

Variable Stroke ''':''' Convenient greasing in tight spaces with limited movement of handle Resists back pressure, especially useful in chain tightening of earth moving equipment.

=== Lever Grease Guns Heavy Duty - V Series - V1R/HD/CP/B & V1R/HD/BL/B ===
Professional model – ideal for lubrication in automotive workshops, agricultural & light industrial application. Aluminium die cast grease gun head with built-in air bleeder valve Robust steel barrel with knurling for firm grip. Heavy duty handle with ergonomic non slip soft rubber grip

Available in 2 Finishes :

a. Zinc plated

b. Black Powder Coated

=== Lever Grease Gun Dual Piston - G2R/B ===
The high output greasing solution! For greasing applications requiring voluminous and frequent greasing, especially on agricultureal & construction machinery

Reduce Greasing Time To One-Third : Dual piston mechanism results in triple output per stroke reducing greasing time to one-third.

No Loss of Prime : Dual inlet of grease ensures that gun does not lose prime

=== Lever Grease Guns - V Series - V1R/B ===
21st century design – ideal combination of superior quality & value price. Suitable for use in general lubrication & daily maintenance work. Aluminium die cast grease gun head with built-in air release valve. Soft rubber grip on lever handle for comfortable operation. Durable powder coated Finish

=== Lever Grease Gun - Super Value - G1R/B/T/EC/BL ===
Most popular value priced grease gun - for general purpose lubrication across all sorts of applications Drop resistant steel head with a bulk loader valve. Soft rubber grip on lever handle for comfortable use Durable powder coated Finish

=== Pistol Grip Grease Gun - G5R/B ===
Most popular one hand grease gun designed for use in confined spaces or where access to grease nipples is restricted. 1.2 mm thick steel barrel with heavy duty follower spring. Rolled threads for fast & easy reloading. Aluminium die cast CNC machined head with steel block nut Pistol handle designed to prevent fingers from pinching

=== Mini Lever Grease Gun - G14R/B ===
When you need a tough little grease gun for hard to reach places, this is it! Compact tool box size grease gun. Aluminium die cast head.

=== Mini Pistol Grease Gun - Deluxe - G-16/B ===
One hand pistol grip grease gun with convenient pull type operating mechanism. Aluminum cast head with front & top discharge ports. Durable powder coated Finish. Ideal for greasing in tight spaces such as CNC machines.

== Air Operated Grease Gun ==
High power, continuous flow air operated grease gun.

Continuous discharge of grease with the trigger pressed.

For use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to vehicle air brake compressors.
{| class="wikitable"
!AIR OPERATING RANGE
|40-120 PSI (3-8 BAR)
|-
!PRESSURE RATIO
|40:01:00
|-
!AIR COMPRESSOR VOLUME
|1 CFM / 0.026 CBM @ 6 BAR
|-
!AIR INLET THREADING
|1/4" (F)
|}
{| class="wikitable"
!CAT NR.
!DETAILS
|-
|AGG/1R/B
|150 mm rigid steel extension & 4 jaw coupler
|}

== Battery Powered Grease Gun ==
Powerful 19.2V high torque Motor.

Standard 1.5Ah Ni-Cd battery pack with an additional battery pack for uninterrupted greasing.

Automatic air release valve & bulk loader.

Each battery charge provides power to dispense upto 2.4 kg grease in free flow condition.

Complete with 30" high pressure hose with spring guard on both ends (prevents hose from kinking), 4 jaw coupler & 400 gm grease cartridge.

Packed in a blow moulded case for safe storage & ease of transportation.

Designed for use by mechanics, technicians, maintenance staff, farmers etc. for everyday greasing & preventive maintenance jobs.
{| class="wikitable"
!CAT NR.
!DETAILS
|-
! colspan="2" |GREASE GUN ASSEMBLY
|-
|BPGG/19/EU-CTG/01P
|Cordless grease gun with 220V/50Hz Battery Charger, 2 pin plug & 400 gm grease cartridge
|-
! colspan="2" |SPARE PARTS & ACCESSORIES
|-
|RB/BPGG/19N
|Rechargeable Battery, 19.2V, 1.5 Ah, Ni-Cd
|-
|BC/BPGG/19N/EU
|1 hour CE energy saving battery charger, 220V/50Hz., 19.2V, 2 pin plug
|-
|SS/BPGG/19N
|Carrying / Shoulder strap
|-
|CTG/01P
|400 gms grease cartridge
|-
|BMC/BPGG/19N
|Carrying case / Blow moulded case
|}

== Grease Accesories ==

=== Hydraulic Couplers ===

==== - Standard ====
Most popular couplers for use with grease guns for general maintenance. Narrow coupler design for use on fittings with limited access. Milled slot for easy tightening. Fully hardened spring steel jaws. Recommended for use with hand operated grease guns.

==== - Professional ====
Best selling coupler for professional use. Hardened coupler body withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy tightening Recommended for use with hand operated grease guns.

==== - Heavy Duty ====
Heavy duty couplers recommended for use with air operated grease guns. Hardened coupler body with double wall thickness withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy Tightening.
{| class="wikitable"
!
!CAT NR.
!THREADS
!JAWS
!PRESSURE
|-
! rowspan="2" |Standard
|HC/11/4/B
|1/8" BSPT
|4
| rowspan="2" |UPTO 3,000 PSI
(207 BAR)
|-
|HC/11/4/BSP
|1/8" BSP
|4
|-
! rowspan="2" |Professional
|HC/14/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 6,000 PSI
(413 BAR)
|-
|HC/14/4/B
|1/8" BSPT
|4
|-
! rowspan="2" |Heavy Duty
|HC/12/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 10,000 PSI
(690 BAR)
|-
|HC/12/4/B
|1/8" BSPT
|4
|}

=== Push-on Grease Couplers ===
Push-on grease couplers for use with button head grease fittings, found mainly on heavy machinery, agricultural & contractor’s equipment etc. Zinc die cast construction Metal seal imparts increased resistance to wear. Couplers conveniently slide over the face of the button head fittings. Threaded 1/8" BSPT (F)
{| class="wikitable"
!CAT NR.
! colspan="2" |Pressure
|-
|PCN/1/B
|3000 PSI
|207 BAR
|-
|PCN/3/B
|6000 PSI
|413 BAR
|-
|PCN/2/B
|7500 PSI
|517 BAR
|}
[[File:Grease Gun Hose.jpg|alt=Grease Gun Hose|thumb|339x339px|Grease Gun Hose]]

=== Grease Gun Hoses ===
Grease hoses facilitate greasing of fittings in areas with limited access .

Thermoplastic construction, fully flexible with outer diameter (O.D.) 8.5 mm.

Zinc plated steel end connections with hydraulic crimping.

Threaded 1/8" BSPT (M) on both ends.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
|-
|GHC-12/B
|300 mm
|12 in
|-
|GHC-18/B
|450 mm
|18 in
|-
|GHC-20/B
|500 mm
|20 in
|}
[[File:Grease Gun Steel Extensions.jpg|alt=Grease Gun Steel Extensions|thumb|245x245px|Grease Gun Steel Extensions]]

=== Grease Gun Steel Extensions ===
Steel construction with bright zinc plated finish.

High strength rolled threads 1/8" BSPT(M) on both ends.

Available in straight & bent Types.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
!TYPE
|-
|GSP/4/B
|100mm
|4in
|Straight
|-
|GBP/6/B
|150mm
|6in
|Bent
|}

=== Grease Cartridge ===
400 gms of premium lithium complex red grease NLGI grade 2.

Non messy, totally clean offering highest convenience in usage

Useful for all automotive, industrial, construction & agricultural applications

Recommended for use with GROZ grease guns
{| class="wikitable"
!CAT NR.
!DESCRIPTION
|-
|CTG/01P
|Grease Cartridge Capacity: 400 gms
|}
[[File:Ezee Lube Kit.jpg|alt=Ezee Lube Kit|thumb|Ezee Lube Kit]]

=== Ezee Lube Kit ===
A range of quick connect accessories suitable for most difficult greasing jobs.

'''CONSTITUENTS :-'''

'''Professional Recessed Lube Adaptor :''' For greasing of recessed fittings, or areas with obstruction where regular grease couplers cannot be used.

'''Grease Injector Needle :''' For greasing in very tight spaces, such as universal joints, sealed bearings etc.

'''Professional 90'''° '''Angled Lube Adaptor :''' Useful for greasing in shoulders & other confined areas.

'''Narrow Needle Nose Adaptor :''' Useful for greasing hard to reach fittings on trucks, vans etc.

'''Seal off Quick Dispenser :''' Converts a jaw type coupler to a seal off dispenser allowing it to be used for lubricating automobiles with grease plugs.

'''Right Angled Quick Coupler :''' Converts a regular coupler to a right angled coupler allowing it to be used for greasing of fittings with limited access.

'''Quick Connect Hose''' Converts a steel extension assembly to a flexible hose allowing access to hard to reach fittings.
{| class="wikitable"
!CAT NR.
|GAK/7
|}

=== Grease Fittings ===
Manufactured to the most stringent quality standards –TS 16949 approved Manufacturing.

Head profile & dimensions are accurately controlled & conform to DIN 71412.

Heat treated greasing ends Zinc plating exceeds ASTM B117.

Fittings have heat treated springs for increased life.

Available ready from stock in a large selection of popular types & sizes, with many more variations custom manufactured.
{| class="wikitable"
!CAT NR.
!TYPE
!HEX SIZE
!OVERALL LENGTH
!BOX QTY.
|-
! colspan="5" |6.0 × 1.0 MM TAPER THREADS
|-
|GFT/6/1
|Straight
|7 mm
|16 mm
|100
|-
|GFT/6/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/6/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |8.0 × 1.0 MM TAPER THREADS
|-
|GFT/8/1
|Straight
|9 mm
|16 mm
|100
|-
|GFT/8/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/8/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |10.0 × 1.0 MM TAPER THREADS
|-
|GFT/10/1
|Straight
|11 mm
|16 mm
|100
|-
|GFT/10/1/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/10/1/90
|90°
|11 mm
|18 mm
|50
|-
! colspan="5" |10.0 MM × 1.5 MM TAPER THREADS
|-
|GFT/10/1.5
|Straight
|11 mm
|18 mm max.
|100
|-
|GFT/10/1.5/45
|45°
|11 mm
|21 mm max.
|50
|-
|GFT/10/1.5/90
|90°
|11 mm
|18 mm max.
|50
|-
! colspan="5" |1/8" × 28 BSPT - TAPER THREADS
|-
|GFT/R/1-8/28
|Straight
|11 mm
|16 mm
|100
|-
|GFT/R/1-8/28L
|Straight
|11 mm
|20 mm
|50
|-
|GFT/R/1-8/28/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/R/1-8/28/45L
|45°
|11 mm
|26.3 mm
|50
|-
|GFT/R/1-8/28/90
|90°
|11 mm
|18 mm
|50
|-
|GFT/R/1-8/28/90L
|90°
|11 mm
|21.4 mm
|50
|-
! colspan="5" |1/4" × 19 BSPT - TAPER THREADS
|-
|GFT/R/1-4/19
|Straight
|9/16"
|17. 5 mm
|50
|-
|GFT/R/1-4/19L
|Straight
|15.24 mm
|23.5 mm
|25
|-
|GFT/R/1-4/19/45
|45°
|9/16"
|22.5 mm
|50
|-
|GFT/R/1-4/19/90
|90°
|9/16"
|22 mm
|50
|}

=== Grease Feeders ===
Grease Feeders are used to provide single point controlled lubrication for all types of bearing

housings thereby eliminating difficulties arising due to over or under greasing. Working on a spring compression mechanism, the design regulates grease discharge in proportion to changing spring pressure, thus maintaining constant discharge pressure of 1- 2 PSI. Die cast aluminium bodies with polycarbonate dome assembled with medium springs. Heavy & light spring come as spares in the same pack and can be easily interchanged depending upon application. Can be mounted in any position for easy visual inspection of grease levels.

Reusable: Can be refilled easily with immediate activation

1/8" (M) steel adaptor at the tail end fits directly onto bearing housings. Thread converters & angle adaptors available as spares. Remote Refill kit also available that permits remote filling of grease from distances up to 3 meters(10’)

==== '''SPRING SELECTION GUIDE''' ====
{| class="wikitable"
! colspan="2" |OPERATING TEMPERATURE
! colspan="5" |NLGI GREASE TYPE
|-
!FROM
!TO
!NO. 0
!NO. 1
!NO. 2
!NO. 3
!NO. 4
|-
| -23°C
|4°C
|Blue
|Silver
|Red
| -
| -
|-
|4°C
|43°C
|Blue
|Silver
|Silver
|Red
| -
|-
|43°C
|93°C
| -
|Blue
|Silver
|Silver
|Red
|-
|93°C
|121°C
| -
| -
|Blue
|Silver
|Red
|}

==== '''SIZE SELECTION GUIDE''' ====
{| class="wikitable"
!BEARING SHAFT DIA.
! colspan="4" |Upto 1-1/2" (38 mm)
! colspan="4" |1-1/2" (38 mm) & over
|-
!OPERATING CONDITION
! colspan="2" |Intermittent
! colspan="2" |Continuous
! colspan="2" |Intermittent
! colspan="2" |Continuous
|-
|CLASS OF BEARING
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|-
|UNDER 1000 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|2 oz.
|2 oz.
|-
|1000 TO 2500 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|-
|OVER 2500 RPM
|2 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|6 oz.
|6 oz.
|}
'''RECOMMENDED USE'''

For use with NLGI 0 to 4 non separating grease on any equipment that

• has anti friction, oscillating or roller bearings

• has shielded bearings with seals

• has bronze, olite or open bearings

• requires bearing flushing action
{| class="wikitable"
! rowspan="2" |CAT NR.
! colspan="2" |BOWL CAPACITY
! colspan="2" |OVERALL DIA.
! colspan="2" |OVERALL HEIGHT
|-
!(OZ.)
!(GMS)
!(INCH)
!(MM)
!(INCH)
!(MM)
|-
|GFD/PA/1/B
|1
|28
|1-3/4
|40
|3-5/8
|92
|-
|GFD/PA/2/B
|2
|56
|2-3/8
|60
|4-5/8
|117
|-
|GFD/PA/6/B
|6
|170
|3
|75
|6
|150
|}

== Portable Manual Grease Pump ==
{| class="wikitable"
!
! colspan="2" |CAT NO
!BUCKET CAPACITY
!DEVELOPS
!DELIVERS
|-
|Portable Greasing System - Manual
| colspan="2" |GS/5
|5
|UPTO 10,000 PSI (690 BAR)
ON HIGH PRESSURE SETTING
|UPTO 1.25 GMS / STROKE
ON HIGH VOLUME SETTING
|-
|Foot Operated Grease Pump
| colspan="2" |FOP/10A
|10
|UPTO 8,700 PSI (600 BAR)
|UPTO 2 GM / STROKE
|-
!
!Without Wheels
!With Wheels
|
|
|
|-
| rowspan="5" |Bucket Greasers
|VGP/3A/RF
| -
|3
| rowspan="5" |UPTO 4,000 PSI (275 BAR)
ON HIGH PRESSURE SETTING
| rowspan="5" |UPTO 9 GM / STROKE ON
HIGH VOLUME SETTING
|-
|VGP/6A
|VGP/6
|6
|-
|VGP/10A
|VGP/10
|10
|-
| -
|VGP/15
|15
|-
| -
|VGP/20
|20
|}

=== Portable Greasing System - Manual (GS/5) ===
Fully portable & single person operated manual greasing system. Portable Greasing System Manual Designed for volume greasing in workshop environments, site applications, on a pick-up truck, tractor, earth moving equipment etc. Pump is operated by foot press of the spring loaded system. The hose gets charged with grease, which can then be dispensed

through the super gun fitted at the end of the hose. A single charge provides upto 30 shots of grease.

'''High Pressure-High Volume Setting'''

Aluminium die cast super gun has high pressure & high volume settings, actuated through a simple switch. High pressure feature is very useful to open blocked grease fittings. Fully sealed pump assembly prevents contamination Complete with drum cover, rubber lined follower plate, premium 1/2" ID high pressure hose, super gun fitted with steel extension, coupler and 5 kg plastic grease bucket

=== Foot Operated Grease Pump ( FOP/10A ) ===
High pressure portable grease pump for quick effortless greasing in everyday lubrication such as greasing of excavators & other earth moving equipment, agricultural equipment, automotive etc.

'''Hands free operation'''

Pump operates using the foot lever, which greatly reduces effort & allows high pressure greasing with highest comfort. Can be operated by hand when under low machinery.

'''Economical'''

Pump is operated by a single person & uses low cost bulk grease. Designed with all moving parts submerged in the same grease which needs to be pumped, thereby staying

lubricated at all times. Moving parts create wave action in grease, auto removing air pockets & eliminating the use of a follower plate.

=== Bucket Greasers ( VGP ) ===
Volume grease pump designed for quick & effortless greasing in applications requiring large volume of lubrication everyday. For use with agricultural equipment, excavators & other earth moving equipment & in automotive applications.

'''Variable Handle Setting'''

can be set for high volume or high pressure grease discharge. Pump delivers upto 9gms of grease on high volume setting. Fully CNC machined to close tolerances the pump develops upto 4,000 PSI (275 BAR) on high pressure setting. Includes follower plate

* High Pressure Setting : Develops 4000 PSI with grease discharge of 4 gms per stroke
* Medium Pressure : Medium Volume Setting Develops 3,000 PSI with grease discharge of 7 gms per stroke
* High Volume Setting : Develops 2000 PSI with grease discharge of over 9 gms per stroke. Useful for bulk filling grease guns

=== Scoop & Swipe Set ( GSW/1/ST ) ===
Now you can avoid the mess while working with bulk grease with hands Use the GROZ Grease Scooper to avoid grease contamination and spillage in 3 simple steps

STEP 1 : Use the Scooper to draw sizable amount of grease from the bucket.

STEP 2 : Use the swipe to clean the Scoop from inside.

STEP 3 : Use the swipe to clean the Scoop from outside.

== Air Operated Grease Pump ==

=== Air Operated Grease Ratio Pumps 50:1 ===
Pump dispenses grease at pressures upto 50 times the air inlet pressure. Designed to work in tough conditions; these are ideal for use in industry, workshop, farm, construction or as part of the Mobile Grease System. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 63 mm dia. air motor . Strainer at suction tube inlet removes dirt, debris etc from entering into the system.

'''Specification :'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2–10 BAR)
|-
!MAXIMUM AIR PRESSURE
|150 PSI (10 BAR)
|-
!AIR INLET CONNECTION
|1/4" BSP (F)
|-
!PUMP OUTLET CONNECTION
|1/4" BSP (F)
|-
!AIR CONSUMPTION
|230 lt / min
|-
!NOISE LEVEL
|81 db
|}
Note : Pump must be supplied with clean & dry compressed air via an FRL unit
{| class="wikitable"
! rowspan="2" |CAT NR.
! rowspan="2" |DRUM SIZE
! rowspan="2" |SUCTION TUBE
LENGTH
! rowspan="2" |DRUM COVER DIA.
! rowspan="2" |DESCRIPTION
! colspan="3" |FOLLOWER PLATE DIMENSIONS
|-
!O.D.
STEELEND
!O.D.
PLATE
!I.D.
GROMMET
|-
| colspan="8" |'''GREASE PUMP KIT'''
|-
!GP1/ST/501/BSP
|20-30 KG
|440 MM
|305 MM
| rowspan="2" |Pump Supplied with drum cover, rubber lined
follower plate, 7' (84") of high pressure grease
hose, Z swivel & professional grease control valve
|241 mm
|288 mm
|29.5 mm
|-
!GP2/ST/501/BSP
|50-60 KG
|730 MM
|381 MM
|322 mm
|380 mm
|29.5 mm
|-
!GP3/ST4/501/BSP
|180 KG
|950 MM
|612 MM
|Pump Supplied with drum cover, rubber lined
follower plate, 7' (84") of high pressure grease
hose, Z swivel & Heavy Duty grease control valve
|550 mm
|602 mm
|29.5 mm
|-
!GP3/ST3/501/BSP
|180 KG
|950 MM
|612 MM
|Pump Supplied with drum cover & rubber lined
follower plate only
|550 mm
|602 mm
|29.5 mm
|-
| colspan="8" |'''PUMP ONLY'''
|-
!GP3/501/BSP
|180 KG
|950 MM
| -
|Pump only
|
|
|
|-
!GP3/501/N
|180 KG
|950 MM
| -
|Pump only
|
|
|
|-
| colspan="8" |'''PORTABLE GREASE PUMP SYSTEM COMPLETE WITH GREASE DRUM'''
|-
!BGRP/15
|15 KG
|
|
|
|
|
|
|-
!BGRP/30
|30 KG
|
|
|
|
|
|
|-
!BGRP/50
|50 KG
|
|
|
|
|
|
|}

=== High Volume Grease Ratio Pump 50:1 ===
Heavy Duty Industrial grade pneumatic pump. Particularly suitable for grease distribution in pipe works & installations where simultaneous grease supply is required on different dispensing points at high pressure or in large volume. Pump dispenses grease upto 50 times the air inlet pressure. All metal construction, fully CNC machined with hardened wear resistant moving parts. Reciprocating piston operated 3" (76 mm) dia. air motor. Stall free, ice free motor with tough durable housing, integrated muffler for quiet operation

'''No Service Required'''

With very few moving parts this rugged pump requires virtually no servicing. No special maintenance tools needed. Supplied complete with drum cover, rubber line follower plate, 3 m high pressure grease hose, Z swivel & professional grease control valve

'''Specification'''
{| class="wikitable"
!WORKING PRESSURE
|30-150 PSI (2-10 BAR)
|-
!AIR INLET CONNECTION
|1/4" NPT
|-
!PUMP OUTLET CONNECTION
|3/8"
|-
!AIR CONSUMPTION
|13 CFM
|-
!NOISE LEVE
|85-90 dB
|}
{| class="wikitable"
!CAT NR.
!FITS
|-
!GPH/1/ST/BSP
|20-30 kg pails
|-
!GPH/2/ST/BSP
|50-60 kg pails
|-
!GPH/3/ST/BSP
|180 kg drums
|}

=== Trolley Mounted Grease Pump Kits ===

=== maxilube® Air Operated 50:1 Grease Pump ===

=== Portable Greasing System ===

=== Grease Control Valve - Professional ===

=== Grease Control Valve - Booster ===

=== Grease Control Valve - Metered ===

GREASING EQUIPMENT

2022-08-03T04:55:54Z

Bhavinrathod: /* Portable Manual Grease Pump */

== Grease Gun ==

=== All Grease Gun Comparision ===
{| class="wikitable"
!CAT NR.
!DETAILS
!DELIVERS
!DEVELOPS
!CAPACITY
|-
!K45R/B
|150 mm rigid steel extension & 3 jaw coupler
|UPTO 1.5 GM / STROKE
| colspan="2" |UPTO 10,000 PSI (690 BAR)
|-
!G1R/HD/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 10,000 PSI (690 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/CP/B
|Zinc Plated,150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/HD/BL/B
|Powder Coated, 150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G2R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 2.4 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!V1R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G1R/B/T/EC/BL
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 1 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G5R/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.50 GM / STROKE
|UPTO 5,000 PSI (345 BAR)
|500 GMS BULK / 400 GMS CARTRIDGE
|-
!G14R/B
|150 mm rigid steel extension & 4 jaw coupler
|UPTO 0.55 GM / STROKE
|UPTO 6,000 PSI (413 BAR)
|120 CC BULK / 85 GMS CARTRIDGE
|-
!G-16/B
|100 mm rigid steel extension & 4 jaw coupler
|UPTO 0.40 GM / STROKE
|UPTO 3,500 PSI (240 BAR)
|120 GMS BULK / 85 GMS CARTRIDGE
|}

=== The Ultimate Lever Grease Gun - K45R/B ===
High capacity - high output lever grease gun Large 650gm capacity barrel for less frequent refilling

Reduce greasing time to one-half : 30% larger dia pistons pushes out 50% more grease /stroke than regular guns Aluminum die cast head fitted with bulk loader valve Heavy gauge drop resistant steel barrel in premium metallic powder coated finish.

Variable Stroke : Convenient greasing in tight spaces with limited movement of handle. High compression spring for removing air pockets from grease. Fully serviceable with no riveted parts. Works with NLGI 1, 2 & 3 greases

=== Lever Grease Gun Heavy Duty - G1R/HD/B ===
Designed for heavy industrial applications. Solid aluminium grease gun head fitted with air bleeder & bulk loader valves 1.2 mm thick steel barrel with heavy duty follower spring, CNC machined head & rolled threads for fast & easy reloading

Unique Lock Lever Mechanism : Allows user to easily lock plunger rod in any position.

Variable Stroke ''':''' Convenient greasing in tight spaces with limited movement of handle Resists back pressure, especially useful in chain tightening of earth moving equipment.

=== Lever Grease Guns Heavy Duty - V Series - V1R/HD/CP/B & V1R/HD/BL/B ===
Professional model – ideal for lubrication in automotive workshops, agricultural & light industrial application. Aluminium die cast grease gun head with built-in air bleeder valve Robust steel barrel with knurling for firm grip. Heavy duty handle with ergonomic non slip soft rubber grip

Available in 2 Finishes :

a. Zinc plated

b. Black Powder Coated

=== Lever Grease Gun Dual Piston - G2R/B ===
The high output greasing solution! For greasing applications requiring voluminous and frequent greasing, especially on agricultureal & construction machinery

Reduce Greasing Time To One-Third : Dual piston mechanism results in triple output per stroke reducing greasing time to one-third.

No Loss of Prime : Dual inlet of grease ensures that gun does not lose prime

=== Lever Grease Guns - V Series - V1R/B ===
21st century design – ideal combination of superior quality & value price. Suitable for use in general lubrication & daily maintenance work. Aluminium die cast grease gun head with built-in air release valve. Soft rubber grip on lever handle for comfortable operation. Durable powder coated Finish

=== Lever Grease Gun - Super Value - G1R/B/T/EC/BL ===
Most popular value priced grease gun - for general purpose lubrication across all sorts of applications Drop resistant steel head with a bulk loader valve. Soft rubber grip on lever handle for comfortable use Durable powder coated Finish

=== Pistol Grip Grease Gun - G5R/B ===
Most popular one hand grease gun designed for use in confined spaces or where access to grease nipples is restricted. 1.2 mm thick steel barrel with heavy duty follower spring. Rolled threads for fast & easy reloading. Aluminium die cast CNC machined head with steel block nut Pistol handle designed to prevent fingers from pinching

=== Mini Lever Grease Gun - G14R/B ===
When you need a tough little grease gun for hard to reach places, this is it! Compact tool box size grease gun. Aluminium die cast head.

=== Mini Pistol Grease Gun - Deluxe - G-16/B ===
One hand pistol grip grease gun with convenient pull type operating mechanism. Aluminum cast head with front & top discharge ports. Durable powder coated Finish. Ideal for greasing in tight spaces such as CNC machines.

== Air Operated Grease Gun ==
High power, continuous flow air operated grease gun.

Continuous discharge of grease with the trigger pressed.

For use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to vehicle air brake compressors.
{| class="wikitable"
!AIR OPERATING RANGE
|40-120 PSI (3-8 BAR)
|-
!PRESSURE RATIO
|40:01:00
|-
!AIR COMPRESSOR VOLUME
|1 CFM / 0.026 CBM @ 6 BAR
|-
!AIR INLET THREADING
|1/4" (F)
|}
{| class="wikitable"
!CAT NR.
!DETAILS
|-
|AGG/1R/B
|150 mm rigid steel extension & 4 jaw coupler
|}

== Battery Powered Grease Gun ==
Powerful 19.2V high torque Motor.

Standard 1.5Ah Ni-Cd battery pack with an additional battery pack for uninterrupted greasing.

Automatic air release valve & bulk loader.

Each battery charge provides power to dispense upto 2.4 kg grease in free flow condition.

Complete with 30" high pressure hose with spring guard on both ends (prevents hose from kinking), 4 jaw coupler & 400 gm grease cartridge.

Packed in a blow moulded case for safe storage & ease of transportation.

Designed for use by mechanics, technicians, maintenance staff, farmers etc. for everyday greasing & preventive maintenance jobs.
{| class="wikitable"
!CAT NR.
!DETAILS
|-
! colspan="2" |GREASE GUN ASSEMBLY
|-
|BPGG/19/EU-CTG/01P
|Cordless grease gun with 220V/50Hz Battery Charger, 2 pin plug & 400 gm grease cartridge
|-
! colspan="2" |SPARE PARTS & ACCESSORIES
|-
|RB/BPGG/19N
|Rechargeable Battery, 19.2V, 1.5 Ah, Ni-Cd
|-
|BC/BPGG/19N/EU
|1 hour CE energy saving battery charger, 220V/50Hz., 19.2V, 2 pin plug
|-
|SS/BPGG/19N
|Carrying / Shoulder strap
|-
|CTG/01P
|400 gms grease cartridge
|-
|BMC/BPGG/19N
|Carrying case / Blow moulded case
|}

== Grease Accesories ==

=== Hydraulic Couplers ===

==== - Standard ====
Most popular couplers for use with grease guns for general maintenance. Narrow coupler design for use on fittings with limited access. Milled slot for easy tightening. Fully hardened spring steel jaws. Recommended for use with hand operated grease guns.

==== - Professional ====
Best selling coupler for professional use. Hardened coupler body withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy tightening Recommended for use with hand operated grease guns.

==== - Heavy Duty ====
Heavy duty couplers recommended for use with air operated grease guns. Hardened coupler body with double wall thickness withstands high pressure without deformation. Fully hardened spring steel Jaws. Hexagonal nut for easy Tightening.
{| class="wikitable"
!
!CAT NR.
!THREADS
!JAWS
!PRESSURE
|-
! rowspan="2" |Standard
|HC/11/4/B
|1/8" BSPT
|4
| rowspan="2" |UPTO 3,000 PSI
(207 BAR)
|-
|HC/11/4/BSP
|1/8" BSP
|4
|-
! rowspan="2" |Professional
|HC/14/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 6,000 PSI
(413 BAR)
|-
|HC/14/4/B
|1/8" BSPT
|4
|-
! rowspan="2" |Heavy Duty
|HC/12/3/B
|1/8" BSPT
|3
| rowspan="2" |UPTO 10,000 PSI
(690 BAR)
|-
|HC/12/4/B
|1/8" BSPT
|4
|}

=== Push-on Grease Couplers ===
Push-on grease couplers for use with button head grease fittings, found mainly on heavy machinery, agricultural & contractor’s equipment etc. Zinc die cast construction Metal seal imparts increased resistance to wear. Couplers conveniently slide over the face of the button head fittings. Threaded 1/8" BSPT (F)
{| class="wikitable"
!CAT NR.
! colspan="2" |Pressure
|-
|PCN/1/B
|3000 PSI
|207 BAR
|-
|PCN/3/B
|6000 PSI
|413 BAR
|-
|PCN/2/B
|7500 PSI
|517 BAR
|}
[[File:Grease Gun Hose.jpg|alt=Grease Gun Hose|thumb|339x339px|Grease Gun Hose]]

=== Grease Gun Hoses ===
Grease hoses facilitate greasing of fittings in areas with limited access .

Thermoplastic construction, fully flexible with outer diameter (O.D.) 8.5 mm.

Zinc plated steel end connections with hydraulic crimping.

Threaded 1/8" BSPT (M) on both ends.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
|-
|GHC-12/B
|300 mm
|12 in
|-
|GHC-18/B
|450 mm
|18 in
|-
|GHC-20/B
|500 mm
|20 in
|}
[[File:Grease Gun Steel Extensions.jpg|alt=Grease Gun Steel Extensions|thumb|245x245px|Grease Gun Steel Extensions]]

=== Grease Gun Steel Extensions ===
Steel construction with bright zinc plated finish.

High strength rolled threads 1/8" BSPT(M) on both ends.

Available in straight & bent Types.
{| class="wikitable"
!CAT NR.
! colspan="2" |LENGTH (END TO END)
!TYPE
|-
|GSP/4/B
|100mm
|4in
|Straight
|-
|GBP/6/B
|150mm
|6in
|Bent
|}

=== Grease Cartridge ===
400 gms of premium lithium complex red grease NLGI grade 2.

Non messy, totally clean offering highest convenience in usage

Useful for all automotive, industrial, construction & agricultural applications

Recommended for use with GROZ grease guns
{| class="wikitable"
!CAT NR.
!DESCRIPTION
|-
|CTG/01P
|Grease Cartridge Capacity: 400 gms
|}
[[File:Ezee Lube Kit.jpg|alt=Ezee Lube Kit|thumb|Ezee Lube Kit]]

=== Ezee Lube Kit ===
A range of quick connect accessories suitable for most difficult greasing jobs.

'''CONSTITUENTS :-'''

'''Professional Recessed Lube Adaptor :''' For greasing of recessed fittings, or areas with obstruction where regular grease couplers cannot be used.

'''Grease Injector Needle :''' For greasing in very tight spaces, such as universal joints, sealed bearings etc.

'''Professional 90'''° '''Angled Lube Adaptor :''' Useful for greasing in shoulders & other confined areas.

'''Narrow Needle Nose Adaptor :''' Useful for greasing hard to reach fittings on trucks, vans etc.

'''Seal off Quick Dispenser :''' Converts a jaw type coupler to a seal off dispenser allowing it to be used for lubricating automobiles with grease plugs.

'''Right Angled Quick Coupler :''' Converts a regular coupler to a right angled coupler allowing it to be used for greasing of fittings with limited access.

'''Quick Connect Hose''' Converts a steel extension assembly to a flexible hose allowing access to hard to reach fittings.
{| class="wikitable"
!CAT NR.
|GAK/7
|}

=== Grease Fittings ===
Manufactured to the most stringent quality standards –TS 16949 approved Manufacturing.

Head profile & dimensions are accurately controlled & conform to DIN 71412.

Heat treated greasing ends Zinc plating exceeds ASTM B117.

Fittings have heat treated springs for increased life.

Available ready from stock in a large selection of popular types & sizes, with many more variations custom manufactured.
{| class="wikitable"
!CAT NR.
!TYPE
!HEX SIZE
!OVERALL LENGTH
!BOX QTY.
|-
! colspan="5" |6.0 × 1.0 MM TAPER THREADS
|-
|GFT/6/1
|Straight
|7 mm
|16 mm
|100
|-
|GFT/6/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/6/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |8.0 × 1.0 MM TAPER THREADS
|-
|GFT/8/1
|Straight
|9 mm
|16 mm
|100
|-
|GFT/8/1/45
|45°
|9 mm
|21 mm
|50
|-
|GFT/8/1/90
|90°
|9 mm
|18 mm
|50
|-
! colspan="5" |10.0 × 1.0 MM TAPER THREADS
|-
|GFT/10/1
|Straight
|11 mm
|16 mm
|100
|-
|GFT/10/1/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/10/1/90
|90°
|11 mm
|18 mm
|50
|-
! colspan="5" |10.0 MM × 1.5 MM TAPER THREADS
|-
|GFT/10/1.5
|Straight
|11 mm
|18 mm max.
|100
|-
|GFT/10/1.5/45
|45°
|11 mm
|21 mm max.
|50
|-
|GFT/10/1.5/90
|90°
|11 mm
|18 mm max.
|50
|-
! colspan="5" |1/8" × 28 BSPT - TAPER THREADS
|-
|GFT/R/1-8/28
|Straight
|11 mm
|16 mm
|100
|-
|GFT/R/1-8/28L
|Straight
|11 mm
|20 mm
|50
|-
|GFT/R/1-8/28/45
|45°
|11 mm
|21 mm
|50
|-
|GFT/R/1-8/28/45L
|45°
|11 mm
|26.3 mm
|50
|-
|GFT/R/1-8/28/90
|90°
|11 mm
|18 mm
|50
|-
|GFT/R/1-8/28/90L
|90°
|11 mm
|21.4 mm
|50
|-
! colspan="5" |1/4" × 19 BSPT - TAPER THREADS
|-
|GFT/R/1-4/19
|Straight
|9/16"
|17. 5 mm
|50
|-
|GFT/R/1-4/19L
|Straight
|15.24 mm
|23.5 mm
|25
|-
|GFT/R/1-4/19/45
|45°
|9/16"
|22.5 mm
|50
|-
|GFT/R/1-4/19/90
|90°
|9/16"
|22 mm
|50
|}

=== Grease Feeders ===
Grease Feeders are used to provide single point controlled lubrication for all types of bearing

housings thereby eliminating difficulties arising due to over or under greasing. Working on a spring compression mechanism, the design regulates grease discharge in proportion to changing spring pressure, thus maintaining constant discharge pressure of 1- 2 PSI. Die cast aluminium bodies with polycarbonate dome assembled with medium springs. Heavy & light spring come as spares in the same pack and can be easily interchanged depending upon application. Can be mounted in any position for easy visual inspection of grease levels.

Reusable: Can be refilled easily with immediate activation

1/8" (M) steel adaptor at the tail end fits directly onto bearing housings. Thread converters & angle adaptors available as spares. Remote Refill kit also available that permits remote filling of grease from distances up to 3 meters(10’)

==== '''SPRING SELECTION GUIDE''' ====
{| class="wikitable"
! colspan="2" |OPERATING TEMPERATURE
! colspan="5" |NLGI GREASE TYPE
|-
!FROM
!TO
!NO. 0
!NO. 1
!NO. 2
!NO. 3
!NO. 4
|-
| -23°C
|4°C
|Blue
|Silver
|Red
| -
| -
|-
|4°C
|43°C
|Blue
|Silver
|Silver
|Red
| -
|-
|43°C
|93°C
| -
|Blue
|Silver
|Silver
|Red
|-
|93°C
|121°C
| -
| -
|Blue
|Silver
|Red
|}

==== '''SIZE SELECTION GUIDE''' ====
{| class="wikitable"
!BEARING SHAFT DIA.
! colspan="4" |Upto 1-1/2" (38 mm)
! colspan="4" |1-1/2" (38 mm) & over
|-
!OPERATING CONDITION
! colspan="2" |Intermittent
! colspan="2" |Continuous
! colspan="2" |Intermittent
! colspan="2" |Continuous
|-
|CLASS OF BEARING
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|Open
|Sealed
|-
|UNDER 1000 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|2 oz.
|2 oz.
|-
|1000 TO 2500 RPM
|1 oz.
|1 oz.
|1 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|-
|OVER 2500 RPM
|2 oz.
|1 oz.
|2 oz.
|2 oz.
|6 oz.
|6 oz.
|6 oz.
|6 oz.
|}
'''RECOMMENDED USE'''

For use with NLGI 0 to 4 non separating grease on any equipment that

• has anti friction, oscillating or roller bearings

• has shielded bearings with seals

• has bronze, olite or open bearings

• requires bearing flushing action
{| class="wikitable"
! rowspan="2" |CAT NR.
! colspan="2" |BOWL CAPACITY
! colspan="2" |OVERALL DIA.
! colspan="2" |OVERALL HEIGHT
|-
!(OZ.)
!(GMS)
!(INCH)
!(MM)
!(INCH)
!(MM)
|-
|GFD/PA/1/B
|1
|28
|1-3/4
|40
|3-5/8
|92
|-
|GFD/PA/2/B
|2
|56
|2-3/8
|60
|4-5/8
|117
|-
|GFD/PA/6/B
|6
|170
|3
|75
|6
|150
|}

== Portable Manual Grease Pump ==
{| class="wikitable"
!
! colspan="2" |CAT NO
!BUCKET CAPACITY
!DEVELOPS
!DELIVERS
|-
|Portable Greasing System - Manual
| colspan="2" |GS/5
|5
|UPTO 10,000 PSI (690 BAR)
ON HIGH PRESSURE SETTING
|UPTO 1.25 GMS / STROKE
ON HIGH VOLUME SETTING
|-
|Foot Operated Grease Pump
| colspan="2" |FOP/10A
|10
|UPTO 8,700 PSI (600 BAR)
|UPTO 2 GM / STROKE
|-
!
!Without Wheels
!With Wheels
|
|
|
|-
| rowspan="5" |Bucket Greasers
|VGP/3A/RF
| -
|3
| rowspan="5" |UPTO 4,000 PSI (275 BAR)
ON HIGH PRESSURE SETTING
| rowspan="5" |UPTO 9 GM / STROKE ON
HIGH VOLUME SETTING
|-
|VGP/6A
|VGP/6
|6
|-
|VGP/10A
|VGP/10
|10
|-
| -
|VGP/15
|15
|-
| -
|VGP/20
|20
|}

=== Portable Greasing System - Manual (GS/5) ===
Fully portable & single person operated manual greasing system. Portable Greasing System Manual Designed for volume greasing in workshop environments, site applications, on a pick-up truck, tractor, earth moving equipment etc. Pump is operated by foot press of the spring loaded system. The hose gets charged with grease, which can then be dispensed

through the super gun fitted at the end of the hose. A single charge provides upto 30 shots of grease.

'''High Pressure-High Volume Setting'''

Aluminium die cast super gun has high pressure & high volume settings, actuated through a simple switch. High pressure feature is very useful to open blocked grease fittings. Fully sealed pump assembly prevents contamination Complete with drum cover, rubber lined follower plate, premium 1/2" ID high pressure hose, super gun fitted with steel extension, coupler and 5 kg plastic grease bucket

=== Foot Operated Grease Pump ( FOP/10A ) ===
High pressure portable grease pump for quick effortless greasing in everyday lubrication such as greasing of excavators & other earth moving equipment, agricultural equipment, automotive etc.

'''Hands free operation'''

Pump operates using the foot lever, which greatly reduces effort & allows high pressure greasing with highest comfort. Can be operated by hand when under low machinery.

'''Economical'''

Pump is operated by a single person & uses low cost bulk grease. Designed with all moving parts submerged in the same grease which needs to be pumped, thereby staying

lubricated at all times. Moving parts create wave action in grease, auto removing air pockets & eliminating the use of a follower plate.

=== Bucket Greasers ( VGP ) ===
Volume grease pump designed for quick & effortless greasing in applications requiring large volume of lubrication everyday. For use with agricultural equipment, excavators & other earth moving equipment & in automotive applications.

'''Variable Handle Setting'''

can be set for high volume or high pressure grease discharge. Pump delivers upto 9gms of grease on high volume setting. Fully CNC machined to close tolerances the pump develops upto 4,000 PSI (275 BAR) on high pressure setting. Includes follower plate

* High Pressure Setting : Develops 4000 PSI with grease discharge of 4 gms per stroke
* Medium Pressure : Medium Volume Setting Develops 3,000 PSI with grease discharge of 7 gms per stroke
* High Volume Setting : Develops 2000 PSI with grease discharge of over 9 gms per stroke. Useful for bulk filling grease guns

=== Scoop & Swipe Set ( GSW/1/ST ) ===
Now you can avoid the mess while working with bulk grease with hands Use the GROZ Grease Scooper to avoid grease contamination and spillage in 3 simple steps

STEP 1 : Use the Scooper to draw sizable amount of grease from the bucket.

STEP 2 : Use the swipe to clean the Scoop from inside.

STEP 3 : Use the swipe to clean the Scoop from outside.

== Air Operated Grease Pump ==

=== Air Operated Grease Ratio Pumps 50:1 ===

=== High Volume Grease Ratio Pump 50:1 ===

=== Trolley Mounted Grease Pump Kits ===

=== maxilube® Air Operated 50:1 Grease Pump ===

=== Portable Greasing System ===

=== Grease Control Valve - Professional ===

=== Grease Control Valve - Booster ===

=== Grease Control Valve - Metered ===

GREASING EQUIPMENT

2022-08-03T04:40:43Z

Bhavinrathod: /* Portable Manual Grease Pump */

Drives

2022-07-30T06:53:19Z

Bhavinrathod: Created page with "We design our chain to enhance performance. Our precision roller chain, attachment chain and engineered chain products excel in tough, high-performance applications and can be..."

We design our chain to enhance performance. Our precision roller chain, attachment chain and engineered chain products excel in tough, high-performance applications and can be custom-manufactured to meet specific needs.

From custom attachment design to standard attachment chain available through our rapid response program, our engineers will connect you and keep your operations rolling.

Our entire range of attachment chain meets or exceeds ANSI/ASME standard B29.1. We are ISO 9001:2000 registered and are an API Quality-registered firm

Timken Drives delivers the attachment chain customers need, when they need it, to get equipment running again.

== ATTACHMENT CHAIN WE OFFER ==
• Standard carbon steel

• Extended Life CHP

• Silver Shield

• Silver Shield with Extended Life CHP pins

• Stainless steel

== AVAILABLE OPTIONS INCLUDE MATCHING AND TAGGING TO THREE CLASSIFICATIONS: ==
• CLASS 1 - Right- and left-hand match pairs.

• CLASS 2 - 0.030 inches maximum variation within 10 feet. Chains are measured, matched and tagged with a maximum variation of 0.030 inches between any given strand length.

• CLASS 3 - Chains requiring a matching tolerance tighter than a class 2.

== Product Range ==
{| class="wikitable"
!Drives
! colspan="2" |Other Terminology
!Description
|-
! colspan="4" |SINGLE-PITCH & DOUBLE-PITCH
|-
|BA-1
|B1 (one hole)
|A1
|Bent attachment, one side, one hole
|-
|BK-1
|B2 (one hole)
|K1
|Bent attachment, both sides, one hole
|-
|SA-1
|S1 (one hole)
|M35
|Straight attachment, one side, one hole
|-
|SK-1
|S2 (one hole)
|M1
|Straight attachment, both sides, one hole
|-
|D-1
|E-1
| -
|One extended pin
|-
|D-3
|E-2
| -
|Two extended pins
|-
! colspan="4" |DOUBLE-PITCH
|-
|BA-2
|B1 (two holes)
|A2
|Bent attachment, one side, two holes
|-
|BK-2
|B2 (two holes)
|K2
|Bent attachment, both sides, two holes
|-
|SA-2
|S1 (two holes)
|M35-2
|Straight attachment, one side, two holes
|-
|SK-2
|S2 (two holes)
|M2
|Straight attachment, both sides, two holes
|-
! colspan="4" |SINGLE-PITCH AND WIDE CONTOUR
|-
|WBA-1
|WCB1(one hole)
|WA1
|Wide contour, bent attachment, one side, one hole
|-
|WBA-2
|WCB1(two holes)
|WA2
|Wide contour, bent attachment, one side, two holes
|-
|WBK-1
|WCB2 (one hole)
|WK1
|Wide contour, bent attachment, both sides, one hole
|-
|WBK-2
|WCB2 (two holes)
|WK2
|Wide contour, bent attachment, both sides, two holes
|-
|WSA-1
|WCS1 (one hole)
|WM35
|Wide contour, straight attachment, one side, one hole
|-
|WSA-2
|WCS1 (two holes)
|WM35-2
|Wide contour, straight attachment, one side, two holes
|-
|WSK-1
|WCS2 (one hole)
|WM-1
|Wide contour, straight attachment, both sides, one hole
|-
|WSK-2
|WCS2 (two holes)
|WM-2
|Wide contour, straight attachment, both sides, two holes
|}

== APPLICATIONS INCLUDE: ==
• Packaging

• Food and beverage

• Forest products

• Paper products

Timken

2022-07-30T06:24:03Z

Bhavinrathod: /* Company overview */

== Company history ==
In 1898, Henry Timken obtained a patent for an improved tapered roller bearing, and in 1899 incorporated as The Timken Roller Bearing Axle Company in St. Louis.

In 1901, the company moved to Canton, Ohio, as the automobile industry began to overtake the carriage industry. Timken and his two sons chose this location because of its proximity to the American car manufacturing centers of Detroit and Cleveland and the American steel-making centers of Pittsburgh and Cleveland.

In 1917, the company began its steel- and tube-making operations in Canton to vertically integrate and maintain better control over the steel used in its bearings. World War I had created an increase in demand for steel, affecting its supply and price in the market.

Timken entered international markets in the early 1900s, establishing a presence initially in Great Britain, France and Germany. The performance of Timken tapered roller bearings in World War I military equipment made an impression on the European bearing market. After the war, Great Britain rose to the position of #2 in the global automotive manufacturing market, creating opportunities for Timken to expand its European manufacturing presence.

Timken entered the Great Depression in a strong financial position and its performance placed it in the ranks of the most solid, well-managed industrial firms of the 1930s. Expanding into non-automotive markets like agriculture, machine tooling, industrial and rail softened the impact.

During World War II, Timken production increased dramatically to keep up with wartime demand. For instance, every U.S. jeep was built using 24 Timken® bearings. With 660,000 jeeps delivered to the U.S. military, Timken delivered more than 15.8 million bearings for those vehicles over the course of the war. Following the war, much of the machinery shipped to Europe under the Marshall Plan was Timken-bearing equipped, helping Timken establish a broader presence in a bearing market where European competitors had dominated.

By 1960, Timken had operations in the U.S., Canada, Great Britain, France, South Africa, Australia and Brazil. Timken Research was created in 1966 to establish technological leadership and to help standardize research and development processes across the company.

Timken expanded into new global markets throughout the 1970s and 1980s, establishing a sales operation in Japan in 1974 and opening sales offices in Italy, Korea, Singapore and Venezuela in 1988. By the late 1990s Timken also had a sales presence in Spain, Hong Kong, China and Singapore.

Timken acquired its competitor, The Torrington Company, in 2003 for $840 million, doubling the size of the company and creating the world's third-largest bearing manufacturer at that time.

The company changed its corporate structure in 2014; the roller bearing-producing part of the company was separated from the steel-producing part of the company, resulting in two separate companies. The Timken Company continues to manufacture roller bearings, while Timken Steel produces steel.

Timken is currently focused on expanding its tapered roller bearings and growing its offering of industrial bearings and mechanical power transmission products and services. Today the company engineers, manufactures and markets bearings, gear drives, automated lubrication systems, belts, chain, couplings and linear motion products, and offers a spectrum of powertrain rebuild and repair services. Timken engineering knowledge in metallurgy, tribology and power transmission is applied across bearings and related systems to improve the reliability and efficiency of machinery around the world. Applications range from the Mars Rover to offshore wind turbines.

The Timken Company brands include: Timken bearings, Fafnir bearings, EDT bearing housed units, Lovejoy couplings and universal joints, Carlisle belts, Cone Drive worm gear drives, Drives chain, Diamond chain, Groeneveld-BEKA lubrication, Interlube lubrication systems, PT Tech industrial clutches and brakes, R+L Hydraulics hydraulic components, Rollon linear motion products and Torsion Control Products spring couplings. The company also operates Timken Power Systems, which supplies and services industrial drivetrain customers with repair, upgrade and service for bearings, gearboxes and electric motors.

== Company overview ==
{|
|+
![[File:Timken.png|alt=Timken Products|center|thumb|[[Timken Products]]]]
![[File:Rollon.png|alt=Rollon|center|thumb|[[Rollon]]]]
![[File:Philadelphia Gear.png|alt=Philadelphia Gear|center|thumb|[[Philadelphia Gear]]]]
|-
|[[File:Groeneveld.png|alt=Groeneveld|center|thumb|[[Groeneveld]]]]
|[[File:Beca.png|alt=Beca|center|thumb|Beca]]
|[[File:Cone Drive.png|alt=Cone Drive|thumb|[[Cone Drive]]|center]]
|-
|[[File:Lovejoy.png|alt=Lovejoy|center|thumb|Lovejoy]]
|[[File:Dimond.png|alt=Dimond|center|thumb|Dimond]]
|[[File:Drives.png|alt=Drives|center|thumb|[[Drives]]]]
|-
|
|[[File:QUICK FLEX Couplings.jpg|alt=QUICK FLEX Couplings|center|thumb|[[QUICK FLEX Couplings]]]]
|
|}

Cone Drive

2022-07-29T13:52:15Z

Bhavinrathod: /* Product Range */

Cone Drive is a world leader in precision motion control technology. We work with our customers every step of the way – from design specs to the final solution – to create highly precise, highly specific products that keep our customers’ technology at the forefront of their industry. Cone Drive offers engineering support, unique solutions, and innovative technology across a breadth of markets and products to drive your company forward.

We design and manufacture worm gears, worm gearboxes, slew bearings, slew drives and harmonic gearing. With a history of gearbox manufacturing that spans nearly 100 years, we are a world leader in precision motion control technology. With Cone Drive you can always find the right solution for your application with the highest quality products and the lead times you require.

= Product Range =

* HIGH PERFORMANCE RIGHT ANGLE DRIVE - NEMA (Series HP)
* HIGH PERFORMANCE RIGHT ANGLE DRIVE - SERVO
* HIGH PERFORMANCE GEAR SETS
* UNIVERSAL RIGHT ANGLE DRIVE (Series HP-A)
* PRECISION RIGHT ANGLE DRIVE (Series W)
* MIDRANGE RIGHT ANGLE DRIVE (Series RG)
* RIGHT ANGLE DRIVE - NEMA (Series B)
* RIGHT ANGLE DRIVE - SERVO (Series S)
* STAINLESS STEEL RIGHT ANGLE DRIVE

{| class="wikitable"
!Product
!Series HP
!Series HP-A
!Series B
!Series RG
!Series F
|-
!Size
|1.50 - 28 in
|100 - 200 mm
|1.33 - 3.54 in
|1.5 - 3.5 in
|39 - 76 mm
|-
!Construction
|Cast Iron
|Cast Iron
|Aluminum
|Cast Iron
|316 Stainless Steel
|-
!Ratio
|5:1 - 343,000:1
|5:1 - 70:1
|5:1 - 3,600:1
|5:1-600:1
|5:1 - 600:1
|-
!Output Torque (Constant Speed)
|2,900,000 lb-in
|88,100 lb-in
|6,370 lb-in
|10,800 lb-in
|5,950 lb-in
|-
!Shock Load Capacity
|High
|High
|Moderate
|High
|Moderate
|-
!IP Rating
|N/A
|N/A
|IP 55
|IP 65
|IP 69k
|-
!Warranty
|5 Year
|5 Year
|2 year
|5 year
|5 Year
|}
{| class="wikitable"
!Product
!Series W
!Series HP
!Series S
!Series RG
!Series F
|-
!Size
|38-89 mm
|3.0-8.0 in
|1.33-3.54 in
|1.5-3.5 in
|39-76 mm
|-
!Construction
|Aluminum
|Cast Iron
|Aluminum
|Cast Iron
|316 Stainless Steel
|-
!Nominal Backlash
|0-24 arcmin
|2-35 arcmin
|12-41 arcmin
|4-27 arcmin
|4-27 arcmin
|-
!Ratio
|5:1-60:1
|5:1-70:1
|5:1-60:1
|5:1-60:1
|5:1-60:1
|-
!Output Torque (Constant Speed)
|< 10,800 lb-in
|< 97,100 lb-in
|< 6,370 lb-in
|< 10,800 lb-in
|< 5,950 lb-in
|-
!Output Torque (Acceleration)
|< 11,700 lb-in
|< 121,000 lb-in
|< 7,540 lb-in
|< 11,700 lb-in
|< 6,380 lb-in
|-
!IP Rating
|IP 65
|N/A
|IP 55
|IP 65
|IP 69k
|-
!Warranty
|5 year
|5 Year
|2 year
|5 year
|5 Year
|}

Cone Drive

2022-07-29T13:49:02Z

Bhavinrathod: /* Product Range */

Cone Drive is a world leader in precision motion control technology. We work with our customers every step of the way – from design specs to the final solution – to create highly precise, highly specific products that keep our customers’ technology at the forefront of their industry. Cone Drive offers engineering support, unique solutions, and innovative technology across a breadth of markets and products to drive your company forward.

We design and manufacture worm gears, worm gearboxes, slew bearings, slew drives and harmonic gearing. With a history of gearbox manufacturing that spans nearly 100 years, we are a world leader in precision motion control technology. With Cone Drive you can always find the right solution for your application with the highest quality products and the lead times you require.

= Product Range =

* HIGH PERFORMANCE RIGHT ANGLE DRIVE - NEMA (Series HP)
* HIGH PERFORMANCE RIGHT ANGLE DRIVE - SERVO
* HIGH PERFORMANCE GEAR SETS
* UNIVERSAL RIGHT ANGLE DRIVE (Series HP-A)
* PRECISION RIGHT ANGLE DRIVE (Series W)
* MIDRANGE RIGHT ANGLE DRIVE (Series RG)
* RIGHT ANGLE DRIVE - NEMA (Series B)
* RIGHT ANGLE DRIVE - SERVO (Series S)
* STAINLESS STEEL RIGHT ANGLE DRIVE

{| class="wikitable"
!Product
!Series HP
!Series HP-A
!Series B
!Series RG
!Series F
|-
!Size
|1.50 - 28 in
|100 - 200 mm
|1.33 - 3.54 in
|1.5 - 3.5 in
|39 - 76 mm
|-
!Construction
|Cast Iron
|Cast Iron
|Aluminum
|Cast Iron
|316
Stainless Steel
|-
!Ratio
|5:1 - 343,000:1
|5:1 - 70:1
|5:1 - 3,600:1
|5:1-600:1
|5:1 - 600:1
|-
!Output Torque
(Constant Speed)
|2,900,000 lb-in
|88,100 lb-in
|6,370 lb-in
|10,800 lb-in
|5,950 lb-in
|-
!Shock Load Capacity
|High
|High
|Moderate
|High
|Moderate
|-
!IP Rating
|N/A
|N/A
|IP 55
|IP 65
|IP 69k
|-
!Warranty
|5 Year
|5 Year
|2 year
|5 year
|5 Year
|}
{| class="wikitable"
!Product
!Series W
!Series HP
!Series S
!Series RG
!Series F
|-
!Size
|38-89 mm
|3.0-8.0 in
|1.33-3.54 in
|1.5-3.5 in
|39-76 mm
|-
!Construction
|Aluminum
|Cast Iron
|Aluminum
|Cast Iron
|316 Stainless Steel
|-
!Nominal Backlash
|0-24 arcmin
|2-35 arcmin
|12-41 arcmin
|4-27 arcmin
|4-27 arcmin
|-
!Ratio
|5:1-60:1
|5:1-70:1
|5:1-60:1
|5:1-60:1
|5:1-60:1
|-
!Output Torque
(Constant Speed)
|< 10,800 lb-in
|< 97,100 lb-in
|< 6,370 lb-in
|< 10,800 lb-in
|< 5,950 lb-in
|-
!Output Torque
(Acceleration)
|< 11,700 lb-in
|< 121,000 lb-in
|< 7,540 lb-in
|< 11,700 lb-in
|< 6,380 lb-in
|-
!IP Rating
|IP 65
|N/A
|IP 55
|IP 65
|IP 69k
|-
!Warranty
|5 year
|5 Year
|2 year
|5 year
|5 Year
|}

Cone Drive

2022-07-29T13:39:46Z

Bhavinrathod:

We design and manufacture worm gears, worm gearboxes, slew bearings, slew drives and harmonic gearing. With a history of gearbox manufacturing that spans nearly 100 years, we are a world leader in precision motion control technology. With Cone Drive you can always find the right solution for your application with the highest quality products and the lead times you require.

= Product Range =
{| class="wikitable"
!Product
!Series HP
!Series HP-A
!Series B
!Series RG
!Series F
|-
!Size
|1.50 - 28 in
|100 - 200 mm
|1.33 - 3.54 in
|1.5 - 3.5 in
|39 - 76 mm
|-
!Construction
|Cast Iron
|Cast Iron
|Aluminum
|Cast Iron
|316
Stainless Steel
|-
!Ratio
|5:1 - 343,000:1
|5:1 - 70:1
|5:1 - 3,600:1
|5:1-600:1
|5:1 - 600:1
|-
!Output Torque
(Constant Speed)
|2,900,000 lb-in
|88,100 lb-in
|6,370 lb-in
|10,800 lb-in
|5,950 lb-in
|-
!Shock Load Capacity
|High
|High
|Moderate
|High
|Moderate
|-
!IP Rating
|N/A
|N/A
|IP 55
|IP 65
|IP 69k
|-
!Warranty
|5 Year
|5 Year
|2 year
|5 year
|5 Year
|}
{| class="wikitable"
!Product
!Series W
!Series HP
!Series S
!Series RG
!Series F
|-
!Size
|38-89 mm
|3.0-8.0 in
|1.33-3.54 in
|1.5-3.5 in
|39-76 mm
|-
!Construction
|Aluminum
|Cast Iron
|Aluminum
|Cast Iron
|316 Stainless Steel
|-
!Nominal Backlash
|0-24 arcmin
|2-35 arcmin
|12-41 arcmin
|4-27 arcmin
|4-27 arcmin
|-
!Ratio
|5:1-60:1
|5:1-70:1
|5:1-60:1
|5:1-60:1
|5:1-60:1
|-
!Output Torque
(Constant Speed)
|< 10,800 lb-in
|< 97,100 lb-in
|< 6,370 lb-in
|< 10,800 lb-in
|< 5,950 lb-in
|-
!Output Torque
(Acceleration)
|< 11,700 lb-in
|< 121,000 lb-in
|< 7,540 lb-in
|< 11,700 lb-in
|< 6,380 lb-in
|-
!IP Rating
|IP 65
|N/A
|IP 55
|IP 65
|IP 69k
|-
!Warranty
|5 year
|5 Year
|2 year
|5 year
|5 Year
|}

Cone Drive

2022-07-29T13:26:05Z

Bhavinrathod: Created page with "We design and manufacture worm gears, worm gearboxes, slew bearings, slew drives and harmonic gearing. With a history of gearbox manufacturing that spans nearly 100 years, we..."

Timken

2022-07-29T10:41:53Z

Bhavinrathod: /* Company history */

== Company history ==
In 1898, Henry Timken obtained a patent for an improved tapered roller bearing, and in 1899 incorporated as The Timken Roller Bearing Axle Company in St. Louis.

In 1901, the company moved to Canton, Ohio, as the automobile industry began to overtake the carriage industry. Timken and his two sons chose this location because of its proximity to the American car manufacturing centers of Detroit and Cleveland and the American steel-making centers of Pittsburgh and Cleveland.

In 1917, the company began its steel- and tube-making operations in Canton to vertically integrate and maintain better control over the steel used in its bearings. World War I had created an increase in demand for steel, affecting its supply and price in the market.

Timken entered international markets in the early 1900s, establishing a presence initially in Great Britain, France and Germany. The performance of Timken tapered roller bearings in World War I military equipment made an impression on the European bearing market. After the war, Great Britain rose to the position of #2 in the global automotive manufacturing market, creating opportunities for Timken to expand its European manufacturing presence.

Timken entered the Great Depression in a strong financial position and its performance placed it in the ranks of the most solid, well-managed industrial firms of the 1930s. Expanding into non-automotive markets like agriculture, machine tooling, industrial and rail softened the impact.

During World War II, Timken production increased dramatically to keep up with wartime demand. For instance, every U.S. jeep was built using 24 Timken® bearings. With 660,000 jeeps delivered to the U.S. military, Timken delivered more than 15.8 million bearings for those vehicles over the course of the war. Following the war, much of the machinery shipped to Europe under the Marshall Plan was Timken-bearing equipped, helping Timken establish a broader presence in a bearing market where European competitors had dominated.

By 1960, Timken had operations in the U.S., Canada, Great Britain, France, South Africa, Australia and Brazil. Timken Research was created in 1966 to establish technological leadership and to help standardize research and development processes across the company.

Timken expanded into new global markets throughout the 1970s and 1980s, establishing a sales operation in Japan in 1974 and opening sales offices in Italy, Korea, Singapore and Venezuela in 1988. By the late 1990s Timken also had a sales presence in Spain, Hong Kong, China and Singapore.

Timken acquired its competitor, The Torrington Company, in 2003 for $840 million, doubling the size of the company and creating the world's third-largest bearing manufacturer at that time.

The company changed its corporate structure in 2014; the roller bearing-producing part of the company was separated from the steel-producing part of the company, resulting in two separate companies. The Timken Company continues to manufacture roller bearings, while Timken Steel produces steel.

Timken is currently focused on expanding its tapered roller bearings and growing its offering of industrial bearings and mechanical power transmission products and services. Today the company engineers, manufactures and markets bearings, gear drives, automated lubrication systems, belts, chain, couplings and linear motion products, and offers a spectrum of powertrain rebuild and repair services. Timken engineering knowledge in metallurgy, tribology and power transmission is applied across bearings and related systems to improve the reliability and efficiency of machinery around the world. Applications range from the Mars Rover to offshore wind turbines.

The Timken Company brands include: Timken bearings, Fafnir bearings, EDT bearing housed units, Lovejoy couplings and universal joints, Carlisle belts, Cone Drive worm gear drives, Drives chain, Diamond chain, Groeneveld-BEKA lubrication, Interlube lubrication systems, PT Tech industrial clutches and brakes, R+L Hydraulics hydraulic components, Rollon linear motion products and Torsion Control Products spring couplings. The company also operates Timken Power Systems, which supplies and services industrial drivetrain customers with repair, upgrade and service for bearings, gearboxes and electric motors.

== Company overview ==
{|
|+
![[File:Timken.png|alt=Timken Products|center|thumb|[[Timken Products]]]]
![[File:Rollon.png|alt=Rollon|center|thumb|[[Rollon]]]]
![[File:Philadelphia Gear.png|alt=Philadelphia Gear|center|thumb|[[Philadelphia Gear]]]]
|-
|[[File:Groeneveld.png|alt=Groeneveld|center|thumb|[[Groeneveld]]]]
|[[File:Beca.png|alt=Beca|center|thumb|Beca]]
|[[File:Cone Drive.png|alt=Cone Drive|thumb|[[Cone Drive]]|center]]
|-
|[[File:Lovejoy.png|alt=Lovejoy|center|thumb|Lovejoy]]
|[[File:Dimond.png|alt=Dimond|center|thumb|Dimond]]
|[[File:Drives.png|alt=Drives|center|thumb|Drives]]
|-
|
|[[File:QUICK FLEX Couplings.jpg|alt=QUICK FLEX Couplings|center|thumb|[[QUICK FLEX Couplings]]]]
|
|}

Automatic lubrication systems

2022-07-22T19:52:05Z

Bhavinrathod: /* Dual-Line Lubrication */

Automatic lubrication systems

2022-07-22T18:44:46Z

Bhavinrathod: Created page with "== Single-Line Lubrication == In single line systems, there is one primary line connecting the pump with the divider blocks and injectors. === BEKA Xlube === * The BEKA Xlub..."

Groeneveld

2022-07-22T18:35:36Z

Bhavinrathod: Created page with "Groeneveld-BEKA was formed through the merger of two well-established companies: Groeneveld and BEKA. Groeneveld was founded in 1971 and acquired by Timken in 2017. BEKA was f..."

Groeneveld-BEKA was formed through the merger of two well-established companies: Groeneveld and BEKA. Groeneveld was founded in 1971 and acquired by Timken in 2017. BEKA was founded in 1927 and acquired by Timken in late 2019. Groeneveld has also incorporated Interlube into their brand. Interlube was acquired by Timken in 2013. Groeneveld-BEKA operates in more than 40 countries worldwide and is represented by a growing number of independent distributors in many countries around the globe.

Groeneveld-BEKA products are supplied for ex-factory installs to leading manufacturers of trucks, trailers, buses, wind turbines, industrial applications, mining and construction equipment. In addition Groeneveld-BEKA systems are installed in the after-market for a wide variety of mobile and industrial applications. Groeneveld-BEKA strives to develop and manufacture all of its products in-house according to World Class Manufacturing principles.

'''Automatic Lubrication Systems'''

Groeneveld-BEKA offers dedicated automatic lubrication systems for equipment in a wide variety of market segments, from the smallest excavator to the largest trucks and industrial applications. The application of our high-end systems leads to decreased wear and tear of critical components, resulting in extended life time, less downtime and reduced repair and maintenance costs. In short: higher productivity and lower operational costs. As operators no longer have to climb on or crawl under the equipment, Groeneveld-BEKA’s automatic lubrication systems also contribute to safety.

For optimal greasing Groeneveld-BEKA also offers a wide range of greases under the brand name GreenLube. This is your guarantee for many years of trouble-free operation of your system and perfect lubrication of your valuable equipment.

'''Fluid Control'''

Groeneveld-BEKA’s fluid management systems reduce daily maintenance and minimize the risk of unexpected downtime by controlling engine oil levels or removing contamination. Next to the oil management systems, Groeneveld-BEKA also offers systems which easily convey hydraulic power from a fixed point to a moving point.

'''Safety Support Systems'''

For many years, Groeneveld-BEKA supplies safety support systems for a wide range of applications. Speedlimiters as well as obstacle detection and camera systems by Groeneveld-BEKA enhance safety in multiple market segments, like transport, construction or container handling.

= [[Automatic lubrication systems]] =
Automatic lubrication of components that needs lubrication like bearings, gears, pins and bushings will save you many hours of manual lubrication. Moreover, the equipment is lubricated during operation or driving, a significant difference with manual lubrication. Together with the extended life span of crucial components, this will ensure that every Groeneveld-BEKA automatic lubrication system has a quick return on investment.

Moreover, maintenance personnel do not constantly have to be present on site. And maintenance personnel do not have to crawl under and climb over the equipment in order to lubricate hard to reach points.

This makes a Groeneveld-BEKA automatic lubrication system a smart investment in machine and truck availability, efficiency, productivity and safety.

Timken

2022-07-22T18:19:44Z

Bhavinrathod: /* Company overview */

== Company history ==
In 1898, Henry Timken obtained a patent for an improved tapered roller bearing, and in 1899 incorporated as The Timken Roller Bearing Axle Company in St. Louis.

In 1901, the company moved to Canton, Ohio, as the automobile industry began to overtake the carriage industry. Timken and his two sons chose this location because of its proximity to the American car manufacturing centers of Detroit and Cleveland and the American steel-making centers of Pittsburgh and Cleveland.

In 1917, the company began its steel- and tube-making operations in Canton to vertically integrate and maintain better control over the steel used in its bearings. World War I had created an increase in demand for steel, affecting its supply and price in the market.

Timken entered international markets in the early 1900s, establishing a presence initially in Great Britain, France and Germany. The performance of Timken tapered roller bearings in World War I military equipment made an impression on the European bearing market. After the war, Great Britain rose to the position of #2 in the global automotive manufacturing market, creating opportunities for Timken to expand its European manufacturing presence.

Timken entered the Great Depression in a strong financial position and its performance placed it in the ranks of the most solid, well-managed industrial firms of the 1930s. Expanding into non-automotive markets like agriculture, machine tooling, industrial and rail softened the impact.

During World War II, Timken production increased dramatically to keep up with wartime demand. For instance, every U.S. jeep was built using 24 Timken® bearings. With 660,000 jeeps delivered to the U.S. military, Timken delivered more than 15.8 million bearings for those vehicles over the course of the war. Following the war, much of the machinery shipped to Europe under the Marshall Plan was Timken-bearing equipped, helping Timken establish a broader presence in a bearing market where European competitors had dominated.

By 1960, Timken had operations in the U.S., Canada, Great Britain, France, South Africa, Australia and Brazil. Timken Research was created in 1966 to establish technological leadership and to help standardize research and development processes across the company.

Timken expanded into new global markets throughout the 1970s and 1980s, establishing a sales operation in Japan in 1974 and opening sales offices in Italy, Korea, Singapore and Venezuela in 1988. By the late 1990s Timken also had a sales presence in Spain, Hong Kong, China and Singapore.

Timken acquired its competitor, The Torrington Company, in 2003 for $840 million, doubling the size of the company and creating the world's third-largest bearing manufacturer at that time.

The company changed its corporate structure in 2014; the roller bearing-producing part of the company was separated from the steel-producing part of the company, resulting in two separate companies. The Timken Company continues to manufacture roller bearings, while Timken Steel produces steel.

Timken is currently focused on expanding its tapered roller bearings and growing its offering of industrial bearings and mechanical power transmission products and services. Today the company engineers, manufactures and markets bearings, gear drives, automated lubrication systems, belts, chain, couplings and linear motion products, and offers a spectrum of powertrain rebuild and repair services. Timken engineering knowledge in metallurgy, tribology and power transmission is applied across bearings and related systems to improve the reliability and efficiency of machinery around the world. Applications range from the Mars Rover to offshore wind turbines.

The Timken Company brands include: Timken bearings, Fafnir bearings, EDT bearing housed units, Lovejoy couplings and universal joints, Carlisle belts, Cone Drive worm gear drives, Drives chain, Diamond chain, Groeneveld-BEKA lubrication, Interlube lubrication systems, PT Tech industrial clutches and brakes, R+L Hydraulics hydraulic components, Rollon linear motion products and Torsion Control Products spring couplings. The company also operates Timken Power Systems, which supplies and services industrial drivetrain customers with repair, upgrade and service for bearings, gearboxes and electric motors.

== Company overview ==
{|
|+
![[File:Timken.png|alt=Timken Products|center|thumb|[[Timken Products]]]]
![[File:Rollon.png|alt=Rollon|center|thumb|[[Rollon]]]]
![[File:Philadelphia Gear.png|alt=Philadelphia Gear|center|thumb|[[Philadelphia Gear]]]]
|-
|[[File:Groeneveld.png|alt=Groeneveld|center|thumb|[[Groeneveld]]]]
|[[File:Beca.png|alt=Beca|center|thumb|Beca]]
|[[File:Cone Drive.png|alt=Cone Drive|thumb|Cone Drive|center]]
|-
|[[File:Lovejoy.png|alt=Lovejoy|center|thumb|Lovejoy]]
|[[File:Dimond.png|alt=Dimond|center|thumb|Dimond]]
|[[File:Drives.png|alt=Drives|center|thumb|Drives]]
|-
|
|[[File:QUICK FLEX Couplings.jpg|alt=QUICK FLEX Couplings|center|thumb|[[QUICK FLEX Couplings]]]]
|
|}
{| class="wikitable"
|+
![[File:Timken Belts.png|alt=Timken Belts|center|thumb|Timken Belts]]
![[File:Aerospace Bearing Repair (Bii).png|alt=Aerospace Bearing Repair (Bii)|center|thumb|Aerospace Bearing Repair (Bii)]]
!
!
|-
|
|
|
|
|-
|
|
|
|
|-
|
|
|
|
|}

Philadelphia Gear

2022-07-22T17:15:34Z

Bhavinrathod: Created page with "Philadelphia Gear manufactures and services custom-engineered gearbox systems for critical applications in the defense, energy, and infrastructure markets. Our legacy of desig..."

Philadelphia Gear manufactures and services custom-engineered gearbox systems for critical applications in the defense, energy, and infrastructure markets. Our legacy of design expertise spans over 125 years of serving global OEMs and end-users. Now, as a part of the Timken Power Systems’ network, we leverage electro-mechanical expertise to provide real-time solutions for not only your gearbox but your complete drivetrain system. From gearboxes to electric motors and generators to control systems and bearing repair, we offer a one-stop solution for keeping your critical equipment turning. As machinery becomes more sophisticated and the demands for more production have increased, plant managers are increasingly looking for multi-faceted experts that can handle more than just one aspect of their equipment repair needs. Universities have responded to this trend by developing the multidisciplinary branch of engineering called mechatronics, which focuses on both electrical and mechanical systems to meet this demand. And to follow suit, now as a part of Timken Power Systems, Philadelphia Gear combines over a century of OEM experience with the expertise of five other leading service providers to deliver complete electromechanical support from a single trusted source. So whether it’s gears grinding to a halt, burned-out motors, worn out bearings, or malfunctioning controllers, you get every result you need—all from one name.

== Gearbox Repair ==
"ANY GEARBOX BRAND. ANY TIME." DISCOVER WORLD-CLASS INSPECTION AND GEARBOX REPAIR FROM PHILADELPHIA GEAR.

Managing a critical gearbox issue? Philadelphia Gear is your one stop for gearbox repair, including reliable, responsive gear drive inspections, overhauls, and upgrades. With 125 years of world-class engineering and design experience, we leverage local service, national support, and global expertise to support gear drives from every brand. Our national network of ISO-certified service and manufacturing centers use state-of-the-art design, grinding, and heat-treating technologies to resolve your toughest challenges.

And with our best-in-industry 3-year warranty on regional service center overhauls, you can depend on top-quality performance for years to come.

Brands

==== WE SERVICE EVERY GEARBOX BRAND ====
{| class="wikitable"
|Allen Gear
|Chemineer
|Flender
|Horsburgh & Scott
|Nuttal
|Thyssen
|-
|Amarillo
|Cleveland
|Flender-Graffenstaden
|Lightnin
|Philadelphia Gear*
|WesTech*
|-
|BHS-Voith
|Delaval Steam Turbine*
|Foote Jones
|Link-Belt
|Philadelphia Mixers
|Western Gear*
|-
|Black Clawson
|D.O. James
|General Electric
|Lufkin
|Renk
|Westinghouse
|-
|Brad Foote
|Elliott
|Hamilton Gear*
|Maag
| colspan="2" |Siemens
|-
|David Brown
|Falk
|Hansen
|Marley
| colspan="2" |Standard Machine*
|-
|John Brown
|Farrell
|Hitachi
|Mitsubishi
| colspan="2" |Sumitomo
|}

== Gearbox Replacement Parts ==
Replacement parts from different manufacturers can differ on many levels - from the material used, to the surface finish, to a part's heat treat. Production costs can be skimped on any of these characteristics, leading to an inferior product that may be more trouble than it was worth to install. Only by using Philadelphia Gear replacement parts can you guarantee that your new parts will provide the same quality afforded by the originals. Please note that Philadelphia Gear is the exclusive provider of Delaval Steam Turbine, Hamilton Gear, General Electric Military Marine, Western Gear and WesTech parts.

Purchasing Philadelphia Gear renewal parts for your Philadelphia Gear equipment ensures that all parts are built to correct specifications, including any improvements that may have been incorporated into the drive design. Plus, should you need to use Philadelphia Gear replacement parts, all existing guarantees and warranties on the original equipment are applicable, along with technical support (if needed) from our world-class engineering staff.

Timken

2022-07-22T16:39:55Z

Bhavinrathod: /* Company overview */

== Company history ==
In 1898, Henry Timken obtained a patent for an improved tapered roller bearing, and in 1899 incorporated as The Timken Roller Bearing Axle Company in St. Louis.

In 1901, the company moved to Canton, Ohio, as the automobile industry began to overtake the carriage industry. Timken and his two sons chose this location because of its proximity to the American car manufacturing centers of Detroit and Cleveland and the American steel-making centers of Pittsburgh and Cleveland.

In 1917, the company began its steel- and tube-making operations in Canton to vertically integrate and maintain better control over the steel used in its bearings. World War I had created an increase in demand for steel, affecting its supply and price in the market.

Timken entered international markets in the early 1900s, establishing a presence initially in Great Britain, France and Germany. The performance of Timken tapered roller bearings in World War I military equipment made an impression on the European bearing market. After the war, Great Britain rose to the position of #2 in the global automotive manufacturing market, creating opportunities for Timken to expand its European manufacturing presence.

Timken entered the Great Depression in a strong financial position and its performance placed it in the ranks of the most solid, well-managed industrial firms of the 1930s. Expanding into non-automotive markets like agriculture, machine tooling, industrial and rail softened the impact.

During World War II, Timken production increased dramatically to keep up with wartime demand. For instance, every U.S. jeep was built using 24 Timken® bearings. With 660,000 jeeps delivered to the U.S. military, Timken delivered more than 15.8 million bearings for those vehicles over the course of the war. Following the war, much of the machinery shipped to Europe under the Marshall Plan was Timken-bearing equipped, helping Timken establish a broader presence in a bearing market where European competitors had dominated.

By 1960, Timken had operations in the U.S., Canada, Great Britain, France, South Africa, Australia and Brazil. Timken Research was created in 1966 to establish technological leadership and to help standardize research and development processes across the company.

Timken expanded into new global markets throughout the 1970s and 1980s, establishing a sales operation in Japan in 1974 and opening sales offices in Italy, Korea, Singapore and Venezuela in 1988. By the late 1990s Timken also had a sales presence in Spain, Hong Kong, China and Singapore.

Timken acquired its competitor, The Torrington Company, in 2003 for $840 million, doubling the size of the company and creating the world's third-largest bearing manufacturer at that time.

The company changed its corporate structure in 2014; the roller bearing-producing part of the company was separated from the steel-producing part of the company, resulting in two separate companies. The Timken Company continues to manufacture roller bearings, while Timken Steel produces steel.

Timken is currently focused on expanding its tapered roller bearings and growing its offering of industrial bearings and mechanical power transmission products and services. Today the company engineers, manufactures and markets bearings, gear drives, automated lubrication systems, belts, chain, couplings and linear motion products, and offers a spectrum of powertrain rebuild and repair services. Timken engineering knowledge in metallurgy, tribology and power transmission is applied across bearings and related systems to improve the reliability and efficiency of machinery around the world. Applications range from the Mars Rover to offshore wind turbines.

The Timken Company brands include: Timken bearings, Fafnir bearings, EDT bearing housed units, Lovejoy couplings and universal joints, Carlisle belts, Cone Drive worm gear drives, Drives chain, Diamond chain, Groeneveld-BEKA lubrication, Interlube lubrication systems, PT Tech industrial clutches and brakes, R+L Hydraulics hydraulic components, Rollon linear motion products and Torsion Control Products spring couplings. The company also operates Timken Power Systems, which supplies and services industrial drivetrain customers with repair, upgrade and service for bearings, gearboxes and electric motors.

== Company overview ==
{|
|+
![[File:Timken.png|alt=Timken Products|center|thumb|[[Timken Products]]]]
![[File:Rollon.png|alt=Rollon|center|thumb|[[Rollon]]]]
![[File:Philadelphia Gear.png|alt=Philadelphia Gear|center|thumb|[[Philadelphia Gear]]]]
|-
|[[File:Groeneveld.png|alt=Groeneveld|center|thumb|Groeneveld]]
|[[File:Beca.png|alt=Beca|center|thumb|Beca]]
|[[File:Cone Drive.png|alt=Cone Drive|thumb|Cone Drive|center]]
|-
|[[File:Lovejoy.png|alt=Lovejoy|center|thumb|Lovejoy]]
|[[File:Dimond.png|alt=Dimond|center|thumb|Dimond]]
|[[File:Drives.png|alt=Drives|center|thumb|Drives]]
|-
|
|[[File:QUICK FLEX Couplings.jpg|alt=QUICK FLEX Couplings|center|thumb|[[QUICK FLEX Couplings]]]]
|
|}
{| class="wikitable"
|+
![[File:Timken Belts.png|alt=Timken Belts|center|thumb|Timken Belts]]
![[File:Aerospace Bearing Repair (Bii).png|alt=Aerospace Bearing Repair (Bii)|center|thumb|Aerospace Bearing Repair (Bii)]]
!
!
|-
|
|
|
|
|-
|
|
|
|
|-
|
|
|
|
|}

Rollon

2022-07-22T08:42:21Z

Bhavinrathod: /* Linear Line */

Finding the ideal solution for our clients’ linear motion applications: this goal has guided all our projects for more than 40 years.

We offer a unique product range in terms of both extensive choice and excellent performance, and we stand apart in the market for our insightful understanding of the client’s application needs. Rollon rails, actuators and systems are conceived in a highly advanced production setting and, with the ongoing commitment of our Application Engineering and R&D Departments, developed into a multitude of customized solutions that perfectly merge with the applications of our clients, to create added value.

Rollon offers the commitment and dedication of a local partner, combined with the organization of a global player. Innovation is the hallmark of our approach, and our wide-spread international presence ensures full service.

Our story speaks of outstanding growth, of our expansion into several industrial sectors and of our evolution towards automation. The company’s acquisition by The Timken Company, an American Group and world leader in the production of bearings and of mechanical components for power transmission, is absolutely another important step and a great opportunity to carry our progress to another level of excellence.

== DIVERSIFIED LINEAR SOLUTIONS FOR EVERY APPLICATION REQUIREMENT ==

=== Linear and telescopic rails ===

==== Linear Line ====
Linear and curved rails with ball and roller bearings, with hardened raceways, high load capacity, self-alignment, and capable of working in dirty environments.

* Linear Rails
** Compact Rail & Compact Rail Plus
** X-Rail
** Easyslide
** Curviline
** O-Rail
** Prismatic Rail
** Speedy Rail
** Mono Rail Plus

==== Telescopic Line ====
Telescopic rails with ball and roller bearings, with hardened raceways, high load capacities, low bending, resistant to shocks and vibrations. For partial, total or extended extraction up to 200% of the length of the guide.

* Telescopic Slides
** Telescopic Rail
** Telerace
** Light Rail

=== Linear actuators and automation systems ===

==== Actuator Line ====
Linear actuators with diﬀerent rail conﬁgurations and transmissions, available with belt, screw, or rack and pinion drives for different needs in terms of precision and speed. Rails with bearings or ball recycle systems for different load capacities and critical environments.

* Actuators
** Plus System
** Clean Room System
** Smart System
** Eco System
** Uniline System
** Precision System
** Tecline
** Modline
** Speedy Rail A

==== Actuator System Line ====
Integrated actuators for industrial automation, used in applications in several industrial sectors: automated industrial machinery, precision assembly lines, packaging lines and high speed production lines. The Actuator Line evolves to satisfy the requests of our most discerning clients.

* Actuator Systems
** Robot Transfer Unit
** 3D Multi-Axis
** 2D Multi-Axis

Rollon

2022-07-22T08:40:46Z

Bhavinrathod: Created page with "Finding the ideal solution for our clients’ linear motion applications: this goal has guided all our projects for more than 40 years. We offer a unique product range in ter..."

Finding the ideal solution for our clients’ linear motion applications: this goal has guided all our projects for more than 40 years.

We offer a unique product range in terms of both extensive choice and excellent performance, and we stand apart in the market for our insightful understanding of the client’s application needs. Rollon rails, actuators and systems are conceived in a highly advanced production setting and, with the ongoing commitment of our Application Engineering and R&D Departments, developed into a multitude of customized solutions that perfectly merge with the applications of our clients, to create added value.

Rollon offers the commitment and dedication of a local partner, combined with the organization of a global player. Innovation is the hallmark of our approach, and our wide-spread international presence ensures full service.

Our story speaks of outstanding growth, of our expansion into several industrial sectors and of our evolution towards automation. The company’s acquisition by The Timken Company, an American Group and world leader in the production of bearings and of mechanical components for power transmission, is absolutely another important step and a great opportunity to carry our progress to another level of excellence.

== DIVERSIFIED LINEAR SOLUTIONS FOR EVERY APPLICATION REQUIREMENT ==

=== Linear and telescopic rails ===

==== Linear Line ====
Linear and curved rails with ball and roller bearings, with hardened raceways, high load capacity, self-alignment, and capable of working in dirty environments.

==== Telescopic Line ====
Telescopic rails with ball and roller bearings, with hardened raceways, high load capacities, low bending, resistant to shocks and vibrations. For partial, total or extended extraction up to 200% of the length of the guide.

=== Linear actuators and automation systems ===

==== Actuator Line ====
Linear actuators with diﬀerent rail conﬁgurations and transmissions, available with belt, screw, or rack and pinion drives for different needs in terms of precision and speed. Rails with bearings or ball recycle systems for different load capacities and critical environments.

==== Actuator System Line ====
Integrated actuators for industrial automation, used in applications in several industrial sectors: automated industrial machinery, precision assembly lines, packaging lines and high speed production lines. The Actuator Line evolves to satisfy the requests of our most discerning clients.

Timken

2022-07-22T08:28:25Z

Bhavinrathod: /* Company overview */

== Company history ==
In 1898, Henry Timken obtained a patent for an improved tapered roller bearing, and in 1899 incorporated as The Timken Roller Bearing Axle Company in St. Louis.

In 1901, the company moved to Canton, Ohio, as the automobile industry began to overtake the carriage industry. Timken and his two sons chose this location because of its proximity to the American car manufacturing centers of Detroit and Cleveland and the American steel-making centers of Pittsburgh and Cleveland.

In 1917, the company began its steel- and tube-making operations in Canton to vertically integrate and maintain better control over the steel used in its bearings. World War I had created an increase in demand for steel, affecting its supply and price in the market.

Timken entered international markets in the early 1900s, establishing a presence initially in Great Britain, France and Germany. The performance of Timken tapered roller bearings in World War I military equipment made an impression on the European bearing market. After the war, Great Britain rose to the position of #2 in the global automotive manufacturing market, creating opportunities for Timken to expand its European manufacturing presence.

Timken entered the Great Depression in a strong financial position and its performance placed it in the ranks of the most solid, well-managed industrial firms of the 1930s. Expanding into non-automotive markets like agriculture, machine tooling, industrial and rail softened the impact.

During World War II, Timken production increased dramatically to keep up with wartime demand. For instance, every U.S. jeep was built using 24 Timken® bearings. With 660,000 jeeps delivered to the U.S. military, Timken delivered more than 15.8 million bearings for those vehicles over the course of the war. Following the war, much of the machinery shipped to Europe under the Marshall Plan was Timken-bearing equipped, helping Timken establish a broader presence in a bearing market where European competitors had dominated.

By 1960, Timken had operations in the U.S., Canada, Great Britain, France, South Africa, Australia and Brazil. Timken Research was created in 1966 to establish technological leadership and to help standardize research and development processes across the company.

Timken expanded into new global markets throughout the 1970s and 1980s, establishing a sales operation in Japan in 1974 and opening sales offices in Italy, Korea, Singapore and Venezuela in 1988. By the late 1990s Timken also had a sales presence in Spain, Hong Kong, China and Singapore.

Timken acquired its competitor, The Torrington Company, in 2003 for $840 million, doubling the size of the company and creating the world's third-largest bearing manufacturer at that time.

The company changed its corporate structure in 2014; the roller bearing-producing part of the company was separated from the steel-producing part of the company, resulting in two separate companies. The Timken Company continues to manufacture roller bearings, while Timken Steel produces steel.

Timken is currently focused on expanding its tapered roller bearings and growing its offering of industrial bearings and mechanical power transmission products and services. Today the company engineers, manufactures and markets bearings, gear drives, automated lubrication systems, belts, chain, couplings and linear motion products, and offers a spectrum of powertrain rebuild and repair services. Timken engineering knowledge in metallurgy, tribology and power transmission is applied across bearings and related systems to improve the reliability and efficiency of machinery around the world. Applications range from the Mars Rover to offshore wind turbines.

The Timken Company brands include: Timken bearings, Fafnir bearings, EDT bearing housed units, Lovejoy couplings and universal joints, Carlisle belts, Cone Drive worm gear drives, Drives chain, Diamond chain, Groeneveld-BEKA lubrication, Interlube lubrication systems, PT Tech industrial clutches and brakes, R+L Hydraulics hydraulic components, Rollon linear motion products and Torsion Control Products spring couplings. The company also operates Timken Power Systems, which supplies and services industrial drivetrain customers with repair, upgrade and service for bearings, gearboxes and electric motors.

== Company overview ==
{|
|+
![[File:Timken.png|alt=Timken Products|center|thumb|[[Timken Products]]]]
![[File:Rollon.png|alt=Rollon|center|thumb|[[Rollon]]]]
![[File:Philadelphia Gear.png|alt=Philadelphia Gear|center|thumb|[https://philagear.com/ Philadelphia Gear]]]
|-
|[[File:Groeneveld.png|alt=Groeneveld|center|thumb|Groeneveld]]
|[[File:Beca.png|alt=Beca|center|thumb|Beca]]
|[[File:Cone Drive.png|alt=Cone Drive|thumb|Cone Drive|center]]
|-
|[[File:Lovejoy.png|alt=Lovejoy|center|thumb|Lovejoy]]
|[[File:Dimond.png|alt=Dimond|center|thumb|Dimond]]
|[[File:Drives.png|alt=Drives|center|thumb|Drives]]
|-
|
|[[File:QUICK FLEX Couplings.jpg|alt=QUICK FLEX Couplings|center|thumb|[[QUICK FLEX Couplings]]]]
|
|}
{| class="wikitable"
|+
![[File:Timken Belts.png|alt=Timken Belts|center|thumb|Timken Belts]]
![[File:Aerospace Bearing Repair (Bii).png|alt=Aerospace Bearing Repair (Bii)|center|thumb|Aerospace Bearing Repair (Bii)]]
!
!
|-
|
|
|
|
|-
|
|
|
|
|-
|
|
|
|
|}

ABB Motors

2022-07-20T13:56:48Z

Bhavinrathod: /* HT Motors */

= LV Motors =

= HT Motors =
ABB’s latest generation of multipurpose rib cooled motors offer high power density, easy configurability and built-in serviceability. The motors are based on the successful, high performance rib cooled motor range, type HXR. They incorporate experience ABB has gained over more than 100 years of manufacturing electric motors.

ABB’s high voltage rib cooled motors are available as N-series general purpose motors (type NXR) and A-series engineered motors (type AXR). N-series general purpose motors combine cost efficient standardized designs and short lead times with safety, productivity, energy efficiency and reliability. They are targeted at applications where a highly customized motor is not needed. A-series engineered motors are highly customized, fine-tuned to the customer’s precise needs, and offer a high degree of engineering flexibility.

Versions are available for both direct-on-line (DOL) and variable speed drive (VSD) operation.

=== Key features and benefits ===
• High efficiency for reduced cost of running

• High power density for more watts per kilogram than ever before with rib cooled designs

• Optional ingress protection level available up to IP66

• Compact size for smaller overall installations

• Rigid, weight-optimized frame is engineered to minimize vibration

• Fixing points make accessory fitting straightforward

• Cable tray for auxiliary wiring ensures clear cable routing, which keeps the airflow free and ribs easy to clean

• Flexible repositioning of main terminal box on site by ABB service personnel

• Interchangeable terminal boxes reduce need for spare motors

• Built-in serviceability features reduce downtime and cost of not running

• Designed for easy deployment of ABB condition monitoring systems

• Versions optimized for VSD operation can deliver even higher efficiency

• Optimized ABB motor and VSD packages are easy to install and operate

• 3D models available on request

• Based on more than 100 years of experience manufacturing electric motors

{| class="wikitable"
|Output power
|100 to 1800 kW
|-
|Frame size
|315 to 500
|-
|Number of poles
|2 to 12
|-
|Voltages
|Up to 11.5 kV
|-
|Frequency
|50/60 Hz, VSD
|-
|Cooling
|I C411, I C416
|-
|Protection
|IP55 (optionally IP56, IP65 and IP66)
|-
|Enclosure material
|Cast iron
|-
|Bearings
|Antifriction or sleeve
|-
|Motor types
|NXR and AXR
|-
|Mounting
|Horizontal or vertical (vertical mounting available for frame sizes 450 and 500)
|-
|Ex protection types
|Ex ec (previously Ex nA), Ex eb (previously Ex e), Ex tb, Ex pxb, Ex pzc
|-
|Standards
|IEC (electrically NEMA feature available)
|-
|Compatible VSDs
|ABB LV drives ACS580, ACS800 and ACS880, ABB MV drives ACS1000 and ACS2000
|}

ABB Motors

2022-07-20T12:04:42Z

Bhavinrathod: Created page with "= LV Motors = = HT Motors ="

= LV Motors =

= HT Motors =

Home

2022-07-20T11:58:24Z

Bhavinrathod: /* Brands */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* [[ABB Motors]]
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], Link-Belt, Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Couplings

2022-07-20T11:56:54Z

Bhavinrathod: Created page with "= Different Types Of Coupling = <nowiki>*</nowiki>/ Will place Link of our all different types of coupling /* = Do you want One Coupling to Replace your All Couplings ? = ==..."

= Different Types Of Coupling =
<nowiki>*</nowiki>/ Will place Link of our all different types of coupling /*

= Do you want One Coupling to Replace your All Couplings ? =

=== Write to us and we will revert you with all Technical calculation along with Replacement selection : ===
Basic Data Required for Coupling Selection :
{| class="wikitable"
|1
|Application Name
|
|
|-
|2
|Location of Coupling (in Between)
|
|
|-
|3
|Drive Shaft Size + Key way
|(size 0 to 280mm)
|mm
|-
|4
|Driven Shaft Size + Key way
|(size 0 to 280mm)
|mm
|-
|5
|Shaft Seperation
|(0 to 7000)
|mm
|-
|6
|Motor rating (kW)
|(1 to 8947)
|kW
|-
|7
|Gear Box Ratio
|
|
|-
|8
|Shaft rpm
|(1 to 12000)
|rpm
|-
|9
|Ambient Temperature
|<100 ° C
|Y/N
|-
|
|(Select the right range)
|>100° C up to 177° C
|Y/N
|-
|10
|Actual Torque
|
|Nm
|-
|11
|Design Torque
|
|Nm
|-
|12
|Service or Application factor
|
|
|}
- Write maximum data you know , Rest Magic will be done by our engineer to Provide you Maintenance free, Lubrication free and many more benefits

= Equivalent Finder =

Home

2022-07-20T11:41:07Z

Bhavinrathod: /* Product Range */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, [[Couplings]])
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* ABB
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], Link-Belt, Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Pidilite

2022-07-20T11:37:51Z

Bhavinrathod: Created page with "Pidilite is a consumer centric company committed to quality and innovation. For decades, we have been pioneering products for small to large applications, at home and industry..."

Pidilite is a consumer centric company committed to quality and innovation. For decades, we have been pioneering products for small to large applications, at home and industry, which have forged strong bonds with people from all walks of life.

From adhesives, sealants, waterproofing solutions and construction chemicals to arts & crafts, industrial resins, polymers and more, our product portfolio is as diverse as it is ever-evolving. Today, our brands are trusted household and industrial names, and we are the market leader in adhesives.

A robust and growing network makes our products accessible across demographics and geographies. We also embrace our responsibility towards the community through social initiatives in rural development, education and healthcare.

=== Industrial Specialty Products ===
Our focus is on innovating specialty products that cater to the manufacturing sector. The beginning was modest but quite quickly we went from manufacturing industrial pigments to adhesives and sealants, art materials, construction and paint chemicals, industrial adhesives, synthetic resins, industrial and textile resins, and leather chemicals. A strong distribution network and sales offices in eight cities deliver these products to our customers.

An army of over 1,000 representatives cater to the needs of each and every one of our customers, wherever they are. Industrial adhesives, synthetic resins, organic pigments, pigment preparations and surfactants are part of this business. Our presence in the country and in the global arena is strong. Despite the emergence of products similar to our brands, we continue to remain the market leader in the adhesive industry and our brands continue to win market share and hearts

Home

2022-07-20T11:30:01Z

Bhavinrathod: /* Brands */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, Couplings)
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* ABB
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], Link-Belt, Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* [[Pidilite]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

JCB Hand Tools

2022-07-20T11:29:08Z

Bhavinrathod: /* Hand Tools */

JCB, a name synonymous with quality construction equipment worldwide. The story of JCB is a story of innovation, ambition and hardwork. From small beginnings, building agricultural equipment in 1945, to the formidable name it has carved out today, JCB has constantly pushed boundaries in their desire to be the best.

Having conquered the mighty equipment market & still growing foray into the Hand & Power Tools Segment was a logical extension to business. Starting successfully with Europe, JCB has now ventured into the Indian market to satisfy the growing need for superior quality Hand Tools.

The range of tools has been specialy designed & manufactured to serve robust usage & longevity - a requirement that was unfulfilled by available tools so far.

So, if you want hand tools that get the job done properly, then JCB has everything you need !

== Power Tools ==
In every corner of the world, you’ll find a JCB machine. Since our beginnings in 1945, we have always invested heavily in research and development, keeping JCB at the cutting edge of innovation. Today, JCB has some of the finest engineering facilities across the globe, producing a range of over 300 machines and maintaining a reputation for unrivalled customer service. The same innovation to always get the job done better, the same quality to never let you down, the same engineering heritage and expertise that you can trust, can be found in our latest range of JCB Tools.

=== DRILLING ===
Reliable and powerful drilling solutions are at the core of the JCB. Power Tools range, such as our electric drills and impact drills. We have the tools to get the job done.

==== Rotary Drill - JCB-ED450-EM ====
{| class="wikitable"
! colspan="2" |JCB-ED450-EM
|-
|INPUT VOLTAGE
|220 - 240V, 50/60HZ
|-
|POWER
|450W
|-
|NO. LOAD SPEED
|3,300 RPM
|-
|CHUCK CAPACITY
|1-10MM
|-
|MAX DRILLING CAPACITY (STEEL)
|10MM
|-
|MAX DRILLING CAPACITY (WOOD)
|25MM
|-
|WEIGHT
|1.37KG
|}

==== Impact Drill - JCB-ID550-EM - JCB-ID710-EM ====
{| class="wikitable"
!Part Number
!JCB-ID550-EM
!JCB-ID710-EM
|-
!INPUT VOLTAGE
|220 - 240V, 50/60HZ
|220 - 240V, 50/60HZ
|-
!POWER
|550W
|710W
|-
!NO. LOAD SPEED
|2,800 RPM
|2,800 RPM
|-
!HAMMER IMPACT RATE
|48000 BPM
|48000 BPM
|-
!CHUCK CAPACITY
|1.5-13MM
|1.5-13MM
|-
!MAX DRILLING CAPACITY (WOOD)
|25MM
|35MM
|-
!MAX DRILLING CAPACITY (STEEL)
|13MM
|13MM
|-
!MAX DRILLING CAPACITY (MASONRY)
|13MM
|13MM
|-
!WEIGHT
|1.85KG
|1.96KG
|}

=== ROTARY HAMMERS ===
Super strong rotary hammers to break up concrete with minimum fatigue. Ideal for everyday intensive use.
{| class="wikitable"
!
!20MM ROTARY HAMMER
!26MM ROTARY HAMMER
|-
!Part Number
!JCB-RH500-EM
!JCB-RH800-EM
|-
|INPUT VOLTAGE
|220 - 230V, 50HZ
|220 - 230V, 50HZ
|-
|POWER
|500W
|800W
|-
|NO. LOAD SPEED
|1200/MIN
|1300/MIN
|-
|HAMMER IMPACT RATE
|5000 BPM
|5500 BPM
|-
|IMPACT FORCE
|1.8J
|2.8J
|-
|SHANK TYPE
|SDS+
|SDS+
|-
|MAX DRILLING CAPACITY (STEEL)
|13MM
|13MM
|-
|MAX DRILLING CAPACITY (MASONRY)
|20MM
|26MM
|-
|MAX DRILLING CAPACITY (WOOD)
|30MM
|30MM
|-
|WEIGHT
|2.3KG
|3KG
|}

=== DEMOLITION ===
Some jobs just need that extra weight and power to make difficult tasks easier and quicker. We have such tools to enable large diameter drilling and chiselling to speed the process of demolition and renovation. All products feature vibration damping to reduce fatigue and help avoid prolonged use effects
{| class="wikitable"
!
!DEMOLITION HAMMER - 5 KG
!DEMOLITION HAMMER - 11 KG
!DEMOLITION HAMMER - 16 KG
|-
!Part Number
!JCB-DH1300-EM
!JCB-DH1500-EM
!JCB-DH1700-EM
|-
!INPUT VOLTAGE
|230 - 240V, 50HZ
|220 – 240V, 50/60HZ
|230 - 240V, 50HZ
|-
!POWER
|1300W
|1500W
|1700W
|-
!HAMMER IMPACT RATE
|4100 BPM
|1,000 - 2,250 BPM
|0 - 1900 BPM
|-
!IMPACT FORCE
|15J
|16.8J
|65J
|-
!SHANK TYPE
|17MM HEX
|SDS MAX
|30MM HEX
|-
!WEIGHT
|5.5KG
|11KG
|16.6KG
|}

=== CUTTING ===
In all aspects of construction, renovation, fabrication and sometimes demolition, it is essential to have quick and flexible solutions for cutting. Our range offers handy options for minor tasks or prolonged use across a variety of applications.
{| class="wikitable"
!
!355MM CUT OFF MACHINE
!185MM CIRCULAR SAW
!100MM MARBLE CUTTER
!125MM MARBLE CUTTER
|-
!Part Number
!JCB-CO355-EM
!JCB-CS1500-EM
!JCB-MC100-EM
!JCB-MC125-EM
|-
!INPUT VOLTAGE
|220 – 240V, 50/60HZ
|230 - 240V, 50HZ
|INPUT VOLTAGE 220 – 240V, 50/60HZ
|INPUT VOLTAGE 220 – 240V, 50/60HZ
|-
!POWER
|2200W
|1500W
|POWER 1250W
|POWER 1250W
|-
!NO. LOAD SPEED
|4,300 RPM
|5800 RPM
|NO. LOAD SPEED 13,000 RPM
|NO. LOAD SPEED 13,000 RPM
|-
!SAW BLADE DIAMETER
|355MM
|185MM
|100MM / 4"
|125MM / 5"
|-
!WEIGHT
|16.5KG
|4.6KG
|3.5KG
|3.5KG
|-
!Other
|THREAD SIZE : M10
|MAX. CUTTING DEPTH :
0˚: 65MM, 45˚: 43MM
|
|
|}

=== GRINDING ===
JCB Grinders are the most versatile tool used for various metal facbrication jobs. Tough tools for tough application.
{| class="wikitable"
!
!750W ANGLE GRINDER
!900W ANGLE GRINDER
!1100W ANGLE GRINDER
|-
!Part Number
!JCB-AG750-EM-S
!JCB-AG900-EM-S
!JCB-AG1100-EM
|-
!INPUT VOLTAGE
|220 – 240V, 50/60HZ
|220 – 240V, 50/60HZ
|220 – 240V, 50/60HZ
|-
!POWER
|750W
|900W
|1,100W
|-
!NO. LOAD SPEED
|11,000 RPM
|11,000 RPM
|11,000 RPM
|-
!GRINDING DISC DIAMETER
|100MM/4"
|100MM/4"
|125MM/5"
|-
!THREAD SIZE
|M10
|M10
|M14
|-
!WEIGHT
|2.3KG
|2.3KG
|1.98KG
|}

=== SPECIALITY HEAT GUN ===
JCB has variable temperature control on heat gun for precise work. Stripping paint, shaping, varnish, welding and shrinking plastic and various applications are possible with hot air
{| class="wikitable"
!
!VARIABLE SPEED HEAT GUN
|-
!Part Number
!JCB-HG2000-EM
|-
!INPUT VOLTAGE
|220 - 240V, 50/60HZ
|-
!POWER
|2000W
|-
!SETTINGS
|2
|-
!TEMPERATURE
|I: 50- 450°C
|-
!
|II: 60- 600°C
|-
!AIR FLOW
|I: 250L/ MIN
|-
!
|II: 500L/ MIN
|-
!WEIGHT
|0.85KG
|}

JCB Hand Tools

2022-07-15T16:15:43Z

Bhavinrathod: /* ROTARY HAMMERS */

JCB, a name synonymous with quality construction equipment worldwide. The story of JCB is a story of innovation, ambition and hardwork. From small beginnings, building agricultural equipment in 1945, to the formidable name it has carved out today, JCB has constantly pushed boundaries in their desire to be the best.

Having conquered the mighty equipment market & still growing foray into the Hand & Power Tools Segment was a logical extension to business. Starting successfully with Europe, JCB has now ventured into the Indian market to satisfy the growing need for superior quality Hand Tools.

The range of tools has been specialy designed & manufactured to serve robust usage & longevity - a requirement that was unfulfilled by available tools so far.

So, if you want hand tools that get the job done properly, then JCB has everything you need !

== Hand Tools ==

== Power Tools ==
In every corner of the world, you’ll find a JCB machine.

Since our beginnings in 1945, we have always invested

heavily in research and development, keeping JCB

at the cutting edge of innovation. Today, JCB has

some of the finest engineering facilities across the

globe, producing a range of over 300 machines and

maintaining a reputation for unrivalled customer

service. The same innovation to always get the job

done better, the same quality to never let you down,

the same engineering heritage and expertise that you

can trust, can be found in our latest range of JCB

Tools.

=== DRILLING ===
Reliable and powerful drilling solutions are at the core of the JCB. Power Tools range, such as our electric drills and impact drills. We have the tools to get the job done.

==== Rotary Drill - JCB-ED450-EM ====
{| class="wikitable"
! colspan="2" |JCB-ED450-EM
|-
|INPUT VOLTAGE
|220 - 240V, 50/60HZ
|-
|POWER
|450W
|-
|NO. LOAD SPEED
|3,300 RPM
|-
|CHUCK CAPACITY
|1-10MM
|-
|MAX DRILLING CAPACITY (STEEL)
|10MM
|-
|MAX DRILLING CAPACITY (WOOD)
|25MM
|-
|WEIGHT
|1.37KG
|}

==== Impact Drill - JCB-ID550-EM - JCB-ID710-EM ====
{| class="wikitable"
!Part Number
!JCB-ID550-EM
!JCB-ID710-EM
|-
!INPUT VOLTAGE
|220 - 240V, 50/60HZ
|220 - 240V, 50/60HZ
|-
!POWER
|550W
|710W
|-
!NO. LOAD SPEED
|2,800 RPM
|2,800 RPM
|-
!HAMMER IMPACT RATE
|48000 BPM
|48000 BPM
|-
!CHUCK CAPACITY
|1.5-13MM
|1.5-13MM
|-
!MAX DRILLING CAPACITY (WOOD)
|25MM
|35MM
|-
!MAX DRILLING CAPACITY (STEEL)
|13MM
|13MM
|-
!MAX DRILLING CAPACITY (MASONRY)
|13MM
|13MM
|-
!WEIGHT
|1.85KG
|1.96KG
|}

=== ROTARY HAMMERS ===
Super strong rotary hammers to break up concrete with minimum fatigue. Ideal for everyday intensive use.
{| class="wikitable"
!
!20MM ROTARY HAMMER
!26MM ROTARY HAMMER
|-
!Part Number
!JCB-RH500-EM
!JCB-RH800-EM
|-
|INPUT VOLTAGE
|220 - 230V, 50HZ
|220 - 230V, 50HZ
|-
|POWER
|500W
|800W
|-
|NO. LOAD SPEED
|1200/MIN
|1300/MIN
|-
|HAMMER IMPACT RATE
|5000 BPM
|5500 BPM
|-
|IMPACT FORCE
|1.8J
|2.8J
|-
|SHANK TYPE
|SDS+
|SDS+
|-
|MAX DRILLING CAPACITY (STEEL)
|13MM
|13MM
|-
|MAX DRILLING CAPACITY (MASONRY)
|20MM
|26MM
|-
|MAX DRILLING CAPACITY (WOOD)
|30MM
|30MM
|-
|WEIGHT
|2.3KG
|3KG
|}

=== DEMOLITION ===
Some jobs just need that extra weight and power to make difficult tasks easier and quicker. We have such tools to enable large diameter drilling and chiselling to speed the process of demolition and renovation. All products feature vibration damping to reduce fatigue and help avoid prolonged use effects
{| class="wikitable"
!
!DEMOLITION HAMMER - 5 KG
!DEMOLITION HAMMER - 11 KG
!DEMOLITION HAMMER - 16 KG
|-
!Part Number
!JCB-DH1300-EM
!JCB-DH1500-EM
!JCB-DH1700-EM
|-
!INPUT VOLTAGE
|230 - 240V, 50HZ
|220 – 240V, 50/60HZ
|230 - 240V, 50HZ
|-
!POWER
|1300W
|1500W
|1700W
|-
!HAMMER IMPACT RATE
|4100 BPM
|1,000 - 2,250 BPM
|0 - 1900 BPM
|-
!IMPACT FORCE
|15J
|16.8J
|65J
|-
!SHANK TYPE
|17MM HEX
|SDS MAX
|30MM HEX
|-
!WEIGHT
|5.5KG
|11KG
|16.6KG
|}

=== CUTTING ===
In all aspects of construction, renovation, fabrication and sometimes demolition, it is essential to have quick and flexible solutions for cutting. Our range offers handy options for minor tasks or prolonged use across a variety of applications.
{| class="wikitable"
!
!355MM CUT OFF MACHINE
!185MM CIRCULAR SAW
!100MM MARBLE CUTTER
!125MM MARBLE CUTTER
|-
!Part Number
!JCB-CO355-EM
!JCB-CS1500-EM
!JCB-MC100-EM
!JCB-MC125-EM
|-
!INPUT VOLTAGE
|220 – 240V, 50/60HZ
|230 - 240V, 50HZ
|INPUT VOLTAGE 220 – 240V, 50/60HZ
|INPUT VOLTAGE 220 – 240V, 50/60HZ
|-
!POWER
|2200W
|1500W
|POWER 1250W
|POWER 1250W
|-
!NO. LOAD SPEED
|4,300 RPM
|5800 RPM
|NO. LOAD SPEED 13,000 RPM
|NO. LOAD SPEED 13,000 RPM
|-
!SAW BLADE DIAMETER
|355MM
|185MM
|100MM / 4"
|125MM / 5"
|-
!WEIGHT
|16.5KG
|4.6KG
|3.5KG
|3.5KG
|-
!Other
|THREAD SIZE : M10
|MAX. CUTTING DEPTH :
0˚: 65MM, 45˚: 43MM
|
|
|}

=== GRINDING ===
JCB Grinders are the most versatile tool used for various metal facbrication jobs. Tough tools for tough application.
{| class="wikitable"
!
!750W ANGLE GRINDER
!900W ANGLE GRINDER
!1100W ANGLE GRINDER
|-
!Part Number
!JCB-AG750-EM-S
!JCB-AG900-EM-S
!JCB-AG1100-EM
|-
!INPUT VOLTAGE
|220 – 240V, 50/60HZ
|220 – 240V, 50/60HZ
|220 – 240V, 50/60HZ
|-
!POWER
|750W
|900W
|1,100W
|-
!NO. LOAD SPEED
|11,000 RPM
|11,000 RPM
|11,000 RPM
|-
!GRINDING DISC DIAMETER
|100MM/4"
|100MM/4"
|125MM/5"
|-
!THREAD SIZE
|M10
|M10
|M14
|-
!WEIGHT
|2.3KG
|2.3KG
|1.98KG
|}

=== SPECIALITY HEAT GUN ===
JCB has variable temperature control on heat gun for precise work. Stripping paint, shaping, varnish, welding and shrinking plastic and various applications are possible with hot air
{| class="wikitable"
!
!VARIABLE SPEED HEAT GUN
|-
!Part Number
!JCB-HG2000-EM
|-
!INPUT VOLTAGE
|220 - 240V, 50/60HZ
|-
!POWER
|2000W
|-
!SETTINGS
|2
|-
!TEMPERATURE
|I: 50- 450°C
|-
!
|II: 60- 600°C
|-
!AIR FLOW
|I: 250L/ MIN
|-
!
|II: 500L/ MIN
|-
!WEIGHT
|0.85KG
|}

JCB Hand Tools

2022-07-13T17:44:48Z

Bhavinrathod: /* DRILLING */

JCB Hand Tools

2022-07-13T17:06:34Z

Bhavinrathod: Created page with "JCB, a name synonymous with quality construction equipment worldwide. The story of JCB is a story of innovation, ambition and hardwork. From small beginnings, building agricul..."

Home

2022-07-13T16:51:57Z

Bhavinrathod:

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, Couplings)
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* ABB
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], Link-Belt, Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* [[JCB Hand Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* Pidilite

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Home

2022-07-13T04:53:29Z

Bhavinrathod: /* Brands */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, Couplings)
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* ABB
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], Link-Belt, Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]
* JCB Tools

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* [[Lubrilog]]
* Pidilite

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}

Home

2022-07-13T04:52:23Z

Bhavinrathod: /* Brands */

{{DISPLAYTITLE:Home_Jinharsh}}

When it comes to providing highly engineered products that improve productivity and efficiency for industrial applications, we are most reliable distributor in the industry. Our commitment to customer satisfaction and superior value extends to every area of our business.

We have always been faithful to the mission of providing customers with products Original and of high quality. In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken, Rexnord, Dodge, Groz etc.

'''Site Policy & Disclaimer'''

This document has been carefully compiled from Manufacturers data. However, we do not assume any liability for errors or inaccuracies. Published specifications are subject to change without notice. Product suitability for an area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Company does not guarantee the availability of all published products. Latest publications and a complete disclaimer can be downloaded from the Jinharsh website. All trademarks recognized & registered by their respective principal organizations.

[http://jinharsh.com/wp-content/uploads/2019/11/JISPL2019-product-catalog.pdf Download PDF Short Brochure]

== About Company ==
About Jinharsh and other companies

== Product Range ==
These are some major Categories; please visit [[Product Range]] page for detailed product listing with catalog

* MPT Range ( [[Bearing (mechanical)|Bearings]], Housed Units, Couplings)
* PT Range (Motors, Gearbox)
* Maintenance Tools (Other Mechanical Power Transmission Products, Oil Seals & O-Rings, Conveying Equipments, Welding & Cutting)
* Lubrication Related (Lubricants, Automatic Lubricators, Lubrication Equipment, Lube Room & Vans, Oiling Equipment, Fueling Equipment, Other Fluid Handling)
* Tools & Equipments (Hand Tools, LED Worklights, Material Handling, New-Age Products, Services, [[Air Tools]])

== Brands ==
''(Complete list of [[Brands]] which we have been in business with - [[Brands|List Here]])''

'''Primary Authorized Channel for'''

*[[Timken]]
** ABC, Drives, Highfield, Inter-Lube, Philadelphia Gears, Love-Joy, Groeneveld-Beka, Rollon, Cone Drive, R+L Hydraulics, Diamond Chains, Carlise Belts, Fafnir
* ABB
* [[Dodge]], Baldor Motors, Reliance Electric- USA
* [[Regal Rexnord]]
**[[Euroflex]], Rex, [[Addax]], [[Autogard]], [[Falk]], Link-Belt, Marbett, [[Orange Peel]], [[Stearns|Stearns Breaks]], [[Thomas]], [[Tollok]], Duralon
*[[Gamet Bearings]] - (Now HB bearing subsidiary)
* [[Groz Tools]]

* J&J Plumber Blocks & Sleeves, Rollix, GMY
* Ador-Fontech
* [[Flexco]]
* Infinite-uptime
* [[Lubrilog]]

== Contact Us at Jinharsh ==
Our board-line is 022-40900000 for Mumbai. For all other [[Contact Jinharsh|contacts]]

* Locations - Mumbai, Surat, Goa, Nagpur, Indore, Chennai
* Our Social Media - Facebook, Instagram, LinkedIn, Google Business, Twitter
* Export Division; Buy bearings from BearingNET for International Dealers
* Amazon Store & Flipkart Store
* Buy Online Directly
* GEM ID for Government Procurement
* Main Website - www.jinharsh.com
* Whatsapp Numbers

=== Payment Details ===
- Google Pay, RTGS / NEFT details

== Buy right & genuine products ==
We have always been faithful to the mission of providing customers with products Original and of high quality. '''In recent years, counterfeiting, in particular in the rolling bearing industry, has increased exponentially'''. From here the willingness to reiterate our commitment in the fight against this phenomenon and against risks connected to it for plants and users. In light of the same, we have tried to create a Wiki which should gather sufficient data of brands and on how to buy the Right Products with right knowledge; primarily of brands like Timken
*Buy right and buy correct / Genuine Bearings and materials Association of mfg.
** Inspection services
**<nowiki>https://www.stopfakebearings.com/</nowiki>
*Download the WBA app now
[[File:WBA app now Android.png|thumb|'''Recognize fake bearings in just seconds. Download WBA App now on Android'''|alt=|150x150px]]

=== Identify Counterfeit / Fake or Used / second-hand Products & Save Your Equipment ===

* New Packaging
** Batch Codes / Marking Style
** Current Logo vs Past Logo vs Fake Logos
* Old Packaging
** Year Codes
* Some Images of Fake Boxes & Bearings
* Buy from Authorized Channel and preferable with Inspection
* Inspection Certificate
* Popular method of some dealers to buy Old bearings from plants and repackage

== Our Certifications ==
GST & other Tax Compliances; Import Export Certificate; ISO Certifications

Member of AIBBMA

==== Awards & Recognitions ====

= Internal Pages =
[[Inventory|Current Inventory]]

[[Website Sitemap]]

[[Short Links for Wiki Edit]]

__FORCETOC__
__INDEX__
{{DEFAULTSORT:Home_Jinharsh}}